Hello everyone,
We built the latest 96boards/oe-rpb-manifest branch ‘qcom/zeus’ commit [2dc473fece0408614feeac530bf44f380dddd2b7] and installed boot and rootfs images on our board. It seems that the mmcblk0p14 could not be mounted. But branch qcom/warrior commit [72bcd3a03878e60c2d91558d3daeefc19b5d1ebf] works fine.
Does anyone know what the problem is?
There are the information:
| Item | Commit |
|---|---|
| Development environment | Ubuntu 18.04.03 x64 Desktop |
| Little Kernel (emmc_appsboot.mbn) | build from latest Linaro working/qualcomm/lk.git branch ‘release/LA.BR.1.2.7-03810-8x16.0’ commit 0a10f81d847e005244cfa59d7f4dd8c6acfd82f6 |
| db-boot-tools (gpt_both0.bin) | build from latest Linaro working/qualcomm/db-boot-tools.git branch ‘master’ commit 5a7a50613e9d90d45a88e9046e28f10d8d68ce3b |
| bootloaders packages | come from dragonboard-410c-bootloader-emmc-linux-110.zip, but replace emmc_appsboot.mbn and gpt_both0.bin with our built files. |
The debug port log on branch qcom/zeus is as below
Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.0-00288
S - IMAGE_VARIANT_STRING=HAAAANAZA
S - OEM_IMAGE_VERSION_STRING=CRM
S - Boot Config, 0x000002e3
S - Core 0 Frequency, 0 MHz
B - 1544 - PBL, Start
B - 3489 - bootable_media_detect_entry, Start
B - 85551 - bootable_media_detect_success, Start
B - 85555 - elf_loader_entry, Start
B - 87529 - auth_hash_seg_entry, Start
B - 87739 - auth_hash_seg_exit, Start
B - 112458 - elf_segs_hash_verify_entry, Start
B - 172688 - PBL, End
B - 142191 - SBL1, Start
B - 191906 - pm_device_init, Start
D - 14213 - pm_device_init, Delta
B - 206454 - boot_flash_init, Start
D - 0 - boot_flash_init, Delta
B - 210480 - boot_config_data_table_init, Start
D - 27053 - boot_config_data_table_init, Delta - (452 Bytes)
B - 242078 - CDT version:3,Platform ID:24,Major ID:1,Minor ID:0,Subtype:0
B - 248331 - sbl1_ddr_set_params, Start
B - 252113 - cpr_init, Start
D - 0 - cpr_init, Delta
B - 257725 - Pre_DDR_clock_init, Start
D - 183 - Pre_DDR_clock_init, Delta
D - 0 - sbl1_ddr_set_params, Delta
B - 270321 - pm_driver_init, Start
D - 3507 - pm_driver_init, Delta
B - 282613 - SBC platform detected: XO_ADJ_FINE = 0x20
B - 282674 - clock_init, Start
D - 61 - clock_init, Delta
B - 297558 - Image Load, Start
D - 46085 - QSEE Image Loaded, Delta - (571664 Bytes)
B - 343674 - Image Load, Start
D - 305 - SEC Image Loaded, Delta - (2048 Bytes)
B - 350902 - sbl1_efs_handle_cookies, Start
D - 274 - sbl1_efs_handle_cookies, Delta
B - 358710 - Image Load, Start
D - 15433 - QHEE Image Loaded, Delta - (56048 Bytes)
B - 374174 - Image Load, Start
D - 18025 - RPM Image Loaded, Delta - (149316 Bytes)
B - 392230 - Image Load, Start
D - 14365 - APPSBL Image Loaded, Delta - (519792 Bytes)
B - 406626 - QSEE Execution, Start
D - 61 - QSEE Execution, Delta
B - 412329 - SBL1, End
D - 272487 - SBL1, Delta
S - Flash Throughput, 112000 KB/s (1299320 Bytes, 11529 us)
S - DDR Frequency, 400 MHz
Android Bootloader - UART_DM Initialized!!!
[0] [0] BUILD_VERSION=dragonboard410c-LA_BR_1_2_7-03810-8x16_0-linaro2-4-g0a10f81d
[0] [0] BUILD_DATE=15:01:04 - Dec 12 2019
[0] [0] welcome to lk
[10] [10] platform_init()
[10] [10] target_init()
[40] [40] SDHC Running in HS200 mode
[50] [50] Done initialization of the card
[60] [60] pm8x41_get_is_cold_boot: cold boot
[60] [60] Neither 'config' nor 'frp' partition found
[70] [70] Not able to search the panel:
[70] [70] Display not enabled for 24 HW type
[70] [70] Target panel init not found!
[80] [80] pm8x41_get_is_cold_boot: cold boot
[80] [80] partition misc doesn't exist
[90] [90] error in emmc_recovery_init
[90] [90] Unable to locate /bootselect partition
[90] [90] No 'misc' partition found
[100] [100] Error reading MISC partition
[100] [100] failed to get ffbm cookie[100] [100] Loading boot image (7979008): start
[160] [160] Loading boot image (7979008): done
[160] [160] use_signed_kernel=0, is_unlocked=0, is_tampered=0.
[600] [600] qcom,msm-id entry not found
[600] [600] Only one appended non-skales DTB, select it.
[610] [610] target_display_panel_node:510: hw_id=24 panel_name=""
[610] [610] cmdline: root=/dev/mmcblk0p14 rw rootwait console=ttyMSM0,115200n8 androidboot.emmc=true androidboot.serialno=1b75343c androidboot.baseband=apq mdss_mdp.panel=0:dsi:0:
[630] [630] Updating device tree: start
[720] [720] Setting WLAN mac address in DT: 02:00:1B:75:34:3C
[740] [740] Setting Bluetooth BD address in DT: 02:00:1B:75:34:3D
[740] [740] Setting BT mac address in DT: 02:00:1B:75:34:3D
[750] [750] Updating device tree: done
[760] [760] booting linux @ 0x80080000, ramdisk @ 0x9089b800 (22), tags/device tree @ 0x85e00000
[760] [760] Jumping to kernel via monitor
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.96+linaro (oe-user@oe-host) (gcc version 8.2.1 20180802 (Linaro GCC 8.2-2018.08~dev)) #1 SMP PREEMPT Thu Dec 19 10:22:35 UTC 2019
[ 0.000000] Boot CPU: AArch64 Processor [410fd030]
[ 0.000000] Machine model: Qualcomm Technologies, Inc. APQ 8016 SBC
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 16 MiB at 0x00000000ff000000
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000ffffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0xfef95180-0xfef96c7f]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x0000000085ffffff]
[ 0.000000] node 0: [mem 0x0000000089f00000-0x000000008e9fffff]
[ 0.000000] node 0: [mem 0x000000008eb00000-0x00000000ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 24 pages/cpu @ffff80007ef30000 s57496 r8192 d32616 u98304
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM errata 826319, 827319, 824069
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 499712
[ 0.000000] Policy zone: DMA
[ 0.000000] Kernel command line: root=/dev/mmcblk0p14 rw rootwait console=ttyMSM0,115200n8 androidboot.emmc=true androidboot.serialno=1b75343c androidboot.baseband=apq mdss_mdp.panel=0:dsi:0:
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Memory: 1961692K/2031616K available (10492K kernel code, 1572K rwdata, 5168K rodata, 1152K init, 389K bss, 53540K reserved, 16384K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB)
[ 0.000000] .text : 0xffff000008080000 - 0xffff000008ac0000 ( 10496 KB)
[ 0.000000] .rodata : 0xffff000008ac0000 - 0xffff000008fd0000 ( 5184 KB)
[ 0.000000] .init : 0xffff000008fd0000 - 0xffff0000090f0000 ( 1152 KB)
[ 0.000000] .data : 0xffff0000090f0000 - 0xffff000009279200 ( 1573 KB)
[ 0.000000] .bss : 0xffff000009279200 - 0xffff0000092da620 ( 390 KB)
[ 0.000000] fixed : 0xffff7dfffe7f9000 - 0xffff7dfffec00000 ( 4124 KB)
[ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB)
[ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum)
[ 0.000000] 0xffff7e0000000000 - 0xffff7e0002000000 ( 32 MB actual)
[ 0.000000] memory : 0xffff800000000000 - 0xffff800080000000 ( 2048 MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000740] Console: colour dummy device 80x25
[ 0.000800] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
[ 0.000814] pid_max: default: 32768 minimum: 301
[ 0.000901] Security Framework initialized
[ 0.001975] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.002495] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.002541] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.002566] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.019287] ASID allocator initialised with 32768 entries
[ 0.027286] Hierarchical SRCU implementation.
[ 0.040564] EFI services will not be available.
[ 0.047568] smp: Bringing up secondary CPUs ...
[ 0.075851] Detected VIPT I-cache on CPU1
[ 0.075898] CPU1: Booted secondary processor [410fd030]
[ 0.103905] Detected VIPT I-cache on CPU2
[ 0.103946] CPU2: Booted secondary processor [410fd030]
[ 0.131972] Detected VIPT I-cache on CPU3
[ 0.132008] CPU3: Booted secondary processor [410fd030]
[ 0.132087] smp: Brought up 1 node, 4 CPUs
[ 0.132111] SMP: Total of 4 processors activated.
[ 0.132120] CPU features: detected feature: 32-bit EL0 Support
[ 0.132128] CPU features: detected feature: Kernel page table isolation (KPTI)
[ 0.136121] CPU: All CPU(s) started at EL1
[ 0.136142] alternatives: patching kernel code
[ 0.136950] devtmpfs: initialized
[ 0.148156] random: get_random_u32 called from bucket_table_alloc+0x104/0x268 with crng_init=0
[ 0.148684] Registered cp15_barrier emulation handler
[ 0.148701] Registered setend emulation handler
[ 0.148970] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.149022] futex hash table entries: 1024 (order: 5, 131072 bytes)
[ 0.149784] pinctrl core: initialized pinctrl subsystem
[ 0.152084] DMI not present or invalid.
[ 0.152464] NET: Registered protocol family 16
[ 0.155102] cpuidle: using governor menu
[ 0.156966] vdso: 2 pages (1 code @ ffff000008ac6000, 1 data @ ffff0000090f5000)
[ 0.156985] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.165265] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.165770] Serial: AMBA PL011 UART driver
[ 0.201185] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.202495] ACPI: Interpreter disabled.
[ 0.205003] vgaarb: loaded
[ 0.205318] SCSI subsystem initialized
[ 0.205887] usbcore: registered new interface driver usbfs
[ 0.205944] usbcore: registered new interface driver hub
[ 0.206024] usbcore: registered new device driver usb
[ 0.207277] pps_core: LinuxPPS API ver. 1 registered
[ 0.207288] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.207313] PTP clock support registered
[ 0.207509] EDAC MC: Ver: 3.0.0
[ 0.207845] dmi: Firmware registration failed.
[ 0.210223] Advanced Linux Sound Architecture Driver Initialized.
[ 0.211262] clocksource: Switched to clocksource arch_sys_counter
[ 0.211379] VFS: Disk quotas dquot_6.6.0
[ 0.211446] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.211611] pnp: PnP ACPI: disabled
[ 0.219681] NET: Registered protocol family 2
[ 0.220204] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.220422] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.220720] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.220840] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.220913] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.221093] NET: Registered protocol family 1
[ 0.221421] RPC: Registered named UNIX socket transport module.
[ 0.221429] RPC: Registered udp transport module.
[ 0.221435] RPC: Registered tcp transport module.
[ 0.221442] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.221607] Unpacking initramfs...
[ 0.221621] Initramfs unpacking failed: junk in compressed archive
[ 0.222365] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.222690] kvm [1]: HYP mode not available
[ 0.224478] audit: initializing netlink subsys (disabled)
[ 0.224597] audit: type=2000 audit(0.219:1): state=initialized audit_enabled=0 res=1
[ 0.225026] workingset: timestamp_bits=44 max_order=19 bucket_order=0
[ 0.232785] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.233517] NFS: Registering the id_resolver key type
[ 0.233544] Key type id_resolver registered
[ 0.233550] Key type id_legacy registered
[ 0.233564] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.233721] 9p: Installing v9fs 9p2000 file system support
[ 0.236608] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.236621] io scheduler noop registered
[ 0.236764] io scheduler cfq registered (default)
[ 0.236773] io scheduler mq-deadline registered
[ 0.236780] io scheduler kyber registered
[ 0.261309] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.264129] SuperH (H)SCI(F) driver initialized
[ 0.264880] msm_serial 78af000.serial: msm_serial: detected port #1
[ 0.264978] msm_serial 78af000.serial: uartclk = 19200000
[ 0.265042] 78af000.serial: ttyMSM1 at MMIO 0x78af000 (irq = 9, base_baud = 1200000) is a MSM
[ 0.265613] msm_serial 78b0000.serial: msm_serial: detected port #0
[ 0.265687] msm_serial 78b0000.serial: uartclk = 7372800
[ 0.265743] 78b0000.serial: ttyMSM0 at MMIO 0x78b0000 (irq = 10, base_baud = 460800) is a MSM
[ 0.265762] msm_serial: console setup on port #0
[ 1.120719] console [ttyMSM0] enabled
[ 1.125922] msm_serial: driver initialized
[ 1.130327] qcom-iommu 1ef0000.iommu: iommu sec: pgtable size: 94208
[ 1.145580] loop: module loaded
[ 1.150379] spi_qup 78b7000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[ 1.151567] spi_qup 78b9000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[ 1.157861] spmi spmi-0: PMIC arbiter version v2 (0x20010000)
[ 1.172548] s1: supplied by regulator-dummy
[ 1.172886] s2: supplied by regulator-dummy
[ 1.175828] s3: supplied by regulator-dummy
[ 1.179954] s4: supplied by regulator-dummy
[ 1.184070] l1: supplied by regulator-dummy
[ 1.188262] l2: supplied by regulator-dummy
[ 1.192439] l3: supplied by regulator-dummy
[ 1.196586] l4: supplied by regulator-dummy
[ 1.200760] l5: supplied by regulator-dummy
[ 1.204933] l6: supplied by regulator-dummy
[ 1.209095] l7: supplied by regulator-dummy
[ 1.213242] l8: supplied by regulator-dummy
[ 1.217443] l9: supplied by regulator-dummy
[ 1.221587] l10: supplied by regulator-dummy
[ 1.225754] l11: supplied by regulator-dummy
[ 1.230290] l12: supplied by regulator-dummy
[ 1.234516] l13: supplied by regulator-dummy
[ 1.238775] l14: supplied by regulator-dummy
[ 1.243048] l15: supplied by regulator-dummy
[ 1.247302] l16: supplied by regulator-dummy
[ 1.251534] l17: supplied by regulator-dummy
[ 1.255805] l18: supplied by regulator-dummy
[ 1.261139] libphy: Fixed MDIO Bus: probed
[ 1.264618] tun: Universal TUN/TAP device driver, 1.6
[ 1.269860] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.273116] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.278894] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[ 1.284662] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 1.291645] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[ 1.297162] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 1.305698] sky2: driver version 1.30
[ 1.311493] usbcore: registered new interface driver rtl8150
[ 1.314726] usbcore: registered new interface driver r8152
[ 1.320467] usbcore: registered new interface driver asix
[ 1.325762] usbcore: registered new interface driver ax88179_178a
[ 1.331226] usbcore: registered new interface driver cdc_ether
[ 1.337303] usbcore: registered new interface driver net1080
[ 1.343029] usbcore: registered new interface driver cdc_subset
[ 1.348841] usbcore: registered new interface driver zaurus
[ 1.354500] usbcore: registered new interface driver cdc_ncm
[ 1.360188] VFIO - User Level meta-driver version: 0.3
[ 1.368161] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.370857] ehci-pci: EHCI PCI platform driver
[ 1.377411] ehci-platform: EHCI generic platform driver
[ 1.382015] ehci-orion: EHCI orion driver
[ 1.387074] ehci-exynos: EHCI EXYNOS driver
[ 1.391241] ehci-msm: Qualcomm On-Chip EHCI Host Controller
[ 1.395213] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.400645] ohci-pci: OHCI PCI platform driver
[ 1.406930] ohci-platform: OHCI generic platform driver
[ 1.411499] ohci-exynos: OHCI EXYNOS driver
[ 1.417231] usbcore: registered new interface driver usb-storage
[ 1.420697] usbcore: registered new interface driver usbserial
[ 1.426882] usbcore: registered new interface driver usbserial_generic
[ 1.432519] usbserial: USB Serial support registered for generic
[ 1.459430] usb3503 usb2513: switched to HUB mode
[ 1.459453] usb3503 usb2513: usb3503_probe: probed in hub mode
[ 1.476125] msm_hsusb 78d9000.usb: 78d9000.usb supply vbus not found, using dummy regulator
[ 1.479860] i2c /dev entries driver
[ 1.484273] i2c_qup 78b6000.i2c: using default clock-frequency 100000
[ 1.486751] i2c_qup 78b6000.i2c:
[ 1.486751] tx channel not available
[ 1.494075] i2c_qup 78b8000.i2c: using default clock-frequency 100000
[ 1.500145] i2c_qup 78b8000.i2c:
[ 1.500145] tx channel not available
[ 1.507564] i2c_qup 78ba000.i2c: using default clock-frequency 100000
[ 1.513503] i2c_qup 78ba000.i2c:
[ 1.513503] tx channel not available
[ 1.525064] input: pm8941_pwrkey as /devices/platform/soc/200f000.spmi/spmi-0/0-00/200f000.spmi:pm8916@0:pon@800/200f000.spmi:pm8916@0:pon@800:pwrkey/input/input0
[ 1.528389] input: pm8941_pwrkey as /devices/platform/soc/200f000.spmi/spmi-0/0-00/200f000.spmi:pm8916@0:pon@800/200f000.spmi:pm8916@0:pon@800:resin/input/input1
[ 1.544539] qcom-tsens 4a8000.thermal-sensor: tsens calibration failed
[ 1.558948] sdhci: Secure Digital Host Controller Interface driver
[ 1.562374] sdhci: Copyright(c) Pierre Ossman
[ 1.568912] Synopsys Designware Multimedia Card Interface Driver
[ 1.574434] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.581749] sdhci_msm 7864900.sdhci: Got CD GPIO
[ 1.588027] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.590700] usbcore: registered new interface driver usbhid
[ 1.595279] usbhid: USB HID core driver
[ 1.603995] usbcore: registered new interface driver snd-usb-audio
[ 1.606032] NET: Registered protocol family 10
[ 1.611528] Segment Routing with IPv6
[ 1.615087] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 1.619359] NET: Registered protocol family 17
[ 1.624599] 9pnet: Installing 9P2000 support
[ 1.629089] Key type dns_resolver registered
[ 1.634767] registered taskstats version 1
[ 1.656149] s1: supplied by regulator-dummy
[ 1.656201] s1: Bringing 0uV into 375000-375000uV
[ 1.659488] s2: supplied by regulator-dummy
[ 1.664200] s3: supplied by regulator-dummy
[ 1.668053] msm_hsusb 78d9000.usb: 78d9000.usb supply vbus not found, using dummy regulator
[ 1.672859] s3: Bringing 0uV into 375000-375000uV
[ 1.686561] sdhci_msm 7864900.sdhci: Got CD GPIO
[ 1.686814] s4: supplied by regulator-dummy
[ 1.690863] s4: Bringing 0uV into 1800000-1800000uV
[ 1.696254] l1: supplied by s3
[ 1.696823] input: gpio_keys as /devices/platform/gpio_keys/input/input2
[ 1.699050] l1: Bringing 0uV into 375000-375000uV
[ 1.703947] hctosys: unable to open rtc device (rtc0)
[ 1.713879] l2: supplied by s3
[ 1.715319] sdhci_msm 7864900.sdhci: Got CD GPIO
[ 1.718676] l2: Bringing 0uV into 1200000-1200000uV
[ 1.719946] ALSA device list:
[ 1.719949] No soundcards found.
[ 1.734701] l3: supplied by s3
[ 1.737428] l3: Bringing 0uV into 375000-375000uV
[ 1.741019] l4: supplied by s4
[ 1.745274] l4: Bringing 0uV into 17500礐 1.752974] l5: Bringing 0uV into 1750000-1750000uV
[ 1.753585] l6: supplied by s4
[ 1.756688] l6: Bringing 0uV into 1800000-1800000uV
[ 1.760335] l7: supplied by s4
[ 1.764605] l7: Bringing 0uV into 1750000-1750000uV
[ 1.768227] l8: supplied by regulator-dummy
[ 1.772486] l8: Bringing 0uV into 1750000-1750000uV
[ 1.777049] l9: supplied by regulator-dummy
[ 1.781516] l9: Bringing 0uV into 1750000-1750000uV
[ 1.786075] l10: supplied by regulator-dummy
[ 1.790558] l10: Bringing 0uV into 1750000-1750000uV
[ 1.795454] l11: supplied by regulator-dummy
[ 1.800008] l11: Bringing 0uV into 1750000-1750000uV
[ 1.804661] l12: supplied by regulator-dummy
[ 1.809203] l12: Bringing 0uV into 1750000-1750000uV
[ 1.813997] l13: supplied by regulator-dummy
[ 1.818423] l13: Bringing 0uV into 1750000-1750000uV
[ 1.823180] l14: supplied by regulator-dummy
[ 1.827607] l14: Bringing 0uV into 1750000-1750000uV
[ 1.832255] l15: supplied by regulator-dummy
[ 1.836807] l15: Bringing 0uV into 1750000-1750000uV
[ 1.841895] l16: supplied by regulator-dummy
[ 1.846012] l16: Bringing 0uV into 1750000-1750000uV
[ 1.850673] l17: supplied by regulator-dummy
[ 1.855209] l17: Bringing 0uV into 3300000-3300000uV
[ 1.860508] l18: supplied by regulator-dummy
[ 1.864412] l18: Bringing 0uV into 1750000-1750000uV
[ 1.869214] Waiting for root device /dev/mmcblk0p14...
[ 1.919378] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using ADMA 64-bit
[ 1.920908] sdhci_msm 7864900.sdhci: Got CD GPIO
[ 1.979675] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using ADMA 64-bit
[ 1.991362] mmc0: new HS200 MMC card at address 0001
[ 1.992092] mmcblk0: mmc0:0001 DA4064 58.2 GiB
[ 1.995668] mmcblk0boot0: mmc0:0001 DA4064 partition 1 4.00 MiB
[ 2.002212] mmcblk0boot1: mmc0:0001 DA4064 partition 2 4.00 MiB
[ 2.006416] mmcblk0rpmb: mmc0:0001 DA4064 partition 3 16.0 MiB
[ 2.016398] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 200000000, volt: 1050000, enabled: 1. New: freq: 200000000, volt: 1050000, enabled: 1
[ 2.020324] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14
[ 2.065044] EXT4-fs (mmcblk0p14): warning: mounting fs with errors, running e2fsck is recommended
[ 2.065790] random: fast init done
[ 2.073370] EXT4-fs (mmcblk0p14): recovery complete
[ 2.076845] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: (null)
[ 2.081005] VFS: Mounted root (ext4 filesystem) on device 179:14.
[ 2.089767] devtmpfs: mounted
[ 2.095873] Freeing unused kernel memory: 1152K
[ 2.100381] EXT4-fs warning (device mmcblk0p14): ext4_dirent_csum_verify:354: inode #2061: comm swapper/0: No space for directory leaf checksum. Please run e2fsck -D.
[ 2.102671] EXT4-fs error (device mmcblk0p14): ext4_find_entry:1449: inode #2061: comm swapper/0: checksumming directory block 0
[ 2.118603] Starting init: /sbin/init exists but couldn't execute it (error -74)
/bin/sh: can't access tty; job control turned off
[ 2.159180] EXT4-fs warning (device mmcblk0p14): ext4_dirent_csum_verify:354: inode #2060: comm sh: No space for directory leaf checksum. Please run e2fsck -D.
[ 2.159221] EXT4-fs error (device mmcblk0p14): ext4_find_entry:1449: inode #2060: comm sh: checksumming directory block 0
[ 2.173125] EXT4-fs warning (device mmcblk0p14): ext4_dirent_csum_verify:354: inode #2060: comm sh: No space for directory leaf checksum. Please run e2fsck -D.
[ 2.183573] EXT4-fs error (device mmcblk0p14): ext4_find_entry:1449: inode #2060: comm sh: checksumming directory block 0
[ 2.201178] EXT4-fs warning (device mmcblk0p14): ext4_dirent_csum_verify:354: inode #2159: comm sh: No space for directory leaf checksum. Please run e2fsck -D.
[ 2.208766] EXT4-fs error (device mmcblk0p14): ext4_find_entry:1449: inode #2159: comm sh: checksumming directory block 0
[ 2.223562] EXT4-fs warning (device mmcblk0p14): ext4_dirent_csum_verify:354: inode #2159: comm sh: No space for directory leaf checksum. Please run e2fsck -D.
[ 2.233809] EXT4-fs error (device mmcblk0p14): ext4_find_entry:1449: inode #2159: comm sh: checksumming directory block 0
[ 2.248650] EXT4-fs warning (device mmcblk0p14): ext4_dirent_csum_verify:354: inode #2159: comm sh: No space for directory leaf checksum. Please run e2fsck -D.
[ 2.258988] EXT4-fs error (device mmcblk0p14): ext4_find_entry:1449: inode #2159: comm sh: checksumming directory block 0
[ 2.273847] EXT4-fs warning (device mmcblk0p14): ext4_dirent_csum_verify:354: inode #2159: comm sh: No space for directory leaf checksum. Please run e2fsck -D.
[ 2.284142] EXT4-fs error (device mmcblk0p14): ext4_find_entry:1449: inode #2159: comm sh: checksumming directory block 0
[ 2.298942] EXT4-fs warning (device mmcblk0p14): ext4_dirent_csum_verify:354: inode #2159: comm sh: No space for directory leaf checksum. Please run e2fsck -D.
[ 2.309317] EXT4-fs error (device mmcblk0p14): ext4_find_entry:1449: inode #2159: comm sh: checksumming directory block 0
[ 2.324182] EXT4-fs warning (device mmcblk0p14): ext4_dirent_csum_verify:354: inode #2159: comm sh: No space for directory leaf checksum. Please run e2fsck -D.
[ 2.334488] EXT4-fs error (device mmcblk0p14): ext4_find_entry:1449: inode #2159: comm sh: checksumming directory block 0
[ 2.349282] EXT4-fs warning (device mmcblk0p14): ext4_dirent_csum_verify:354: inode #2159: comm sh: No space for directory leaf checksum. Please run e2fsck -D.
[ 2.359578] EXT4-fs error (device mmcblk0p14): ext4_find_entry:1449: inode #2159: comm sh: checksumming directory block 0
/ # df
/bin/sh: df: Bad message
/ # du
/bin/sh: du: Bad message
/ #
Best Regards,
Shihlun Lin
