SD Card / MMC1 not recognized by boot img for rootfs (inforce 6309 410c)


#1

Hi,

I am currently setting up a SD card with the release 18.01 to boot from SD card and also mount the rootfs from the SD card. This worked for an older release but fails with 18.01.

The kernel from the boot.img from the SD card is booting. However, the SD card MMC1 is not recognised by the kernel.

Find the boot log below.
Do you have a suggestion what is the issue?

BR

====================================
Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.0-00261
S - IMAGE_VARIANT_STRING=HAAAANAAA
S - OEM_IMAGE_VERSION_STRING=C-BPATTH
S - Boot Config, 0x000002e3
S - Core 0 Frequency, 0 MHz
B - 1544 - PBL, Start
B - 3489 - bootable_media_detect_entry, Start
B - 186001 - bootable_media_detect_success, Start
B - 186005 - elf_loader_entry, Start
B - 187911 - auth_hash_seg_entry, Start
B - 188121 - auth_hash_seg_exit, Start
B - 215652 - elf_segs_hash_verify_entry, Start
B - 274529 - PBL, End
B - 281911 - SBL1, Start
B - 345138 - pm_device_init, Start
D - 14762 - pm_device_init, Delta
B - 360479 - boot_flash_init, Start
D - 0 - boot_flash_init, Delta
B - 364505 - boot_config_data_table_init, Start
D - 242658 - boot_config_data_table_init, Delta - (0 Bytes)
B - 611708 - CDT version:3,Platform ID:24,Major ID:1,Minor ID:0,Subtype:0
B - 617930 - sbl1_ddr_set_params, Start
B - 621620 - cpr_init, Start
D - 0 - cpr_init, Delta
B - 627232 - Pre_DDR_clock_init, Start
D - 183 - Pre_DDR_clock_init, Delta
D - 0 - sbl1_ddr_set_params, Delta
B - 639707 - pm_driver_init, Start
D - 6832 - pm_driver_init, Delta
B - 655201 - clock_init, Start
D - 30 - clock_init, Delta
B - 665327 - Image Load, Start
D - 40504 - QSEE Image Loaded, Delta - (567468 Bytes)
B - 705861 - Image Load, Start
D - 549 - SEC Image Loaded, Delta - (2048 Bytes)
B - 713090 - sbl1_efs_handle_cookies, Start
D - 0 - sbl1_efs_handle_cookies, Delta
B - 720867 - Image Load, Start
D - 18819 - QHEE Image Loaded, Delta - (56048 Bytes)
B - 739716 - Image Load, Start
D - 16806 - RPM Image Loaded, Delta - (149316 Bytes)
B - 756552 - Image Load, Start
D - 25498 - APPSBL Image Loaded, Delta - (519948 Bytes)
B - 782081 - QSEE Execution, Start
D - 61 - QSEE Execution, Delta
B - 787784 - SBL1, End
D - 508222 - SBL1, Delta
S - Flash Throughput, 59000 KB/s (1294828 Bytes, 21807 us)
S - DDR Frequency, 400 MHz
Android Bootloader - UART_DM Initialized!!!
[0] [0] BUILD_VERSION=
[0] [0] BUILD_DATE=15:13:08 - Feb 5 2018
[0] [0] welcome to lk

[10] [10] platform_init()
[10] [10] target_init()
[20] [20] initialising mmc_slot =2
[30] [30] Error: Command timeout error
[30] [30] Failure getting OCR response from MMC Card
[30] [30] MMC card failed to respond, try for SD card
[110] [110] Done initialization of the card
[120] [120] pm8x41_get_is_cold_boot: cold boot
[120] [120] Neither ‘config’ nor ‘frp’ partition found
[130] [130] Not able to search the panel:
[130] [130] Display not enabled for 24 HW type
[130] [130] Target panel init not found!
[140] [140] pm8x41_get_is_cold_boot: cold boot
[140] [140] partition misc doesn’t exist
[150] [150] error in emmc_recovery_init
[150] [150] Unable to locate /bootselect partition
[150] [150] No ‘misc’ partition found
[160] [160] Error reading MISC partition
[160] [160] failed to get ffbm cookie[170] [170] Loading boot image (11825152): start
[720] [720] Loading boot image (11825152): done
[730] [730] use_signed_kernel=0, is_unlocked=0, is_tampered=0.
[1160] [1160] Best match DTB tags 247/00010018/0x00000000/0/2000b/0/0/0/9085b458/cd75
[1170] [1170] Using pmic info 0x2000b/0x0/0x0/0x0 for device 0x2000b/0x0/0x0/0x0
[1170] [1170] target_display_panel_node:510: hw_id=24 panel_name=“”
[1180] [1180] cmdline: root=/dev/mmcblk1p9 rw rootwait console=tty0 console=ttyMSM0,115200n8 log_buf_len=4M androidboot.emmc=true androidboot.serialno=29b02e0a androidboot.baseband=apq mdss_mdp.panel=0:dsi:0:
[1200] [1200] Updating device tree: start
[1260] [1260] Setting WLAN mac address in DT: 02:00:29:B0:2E:0A
[1280] [1280] Setting Bluetooth BD address in DT: 02:00:29:B0:2E:0B
[1280] [1280] Setting BT mac address in DT: 02:00:29:B0:2E:0B
[1290] [1290] Updating device tree: done
[1290] [1290] booting linux @ 0x80080000, ramdisk @ 0x84000000 (4004777), tags/device tree @ 0x83e00000
[1300] [1300] Jumping to kernel via monitor
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.0-qcom-ifc6309-arm64 (ubuntu@ip-172-31-35-134) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02)) #1 SMP PREEMPT Sat Oct 6 20:23:30 UTC 2018
[ 0.000000] Boot CPU: AArch64 Processor [410fd030]
[ 0.000000] Machine model: Qualcomm Technologies, Inc. APQ 8016 SBC
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 16 MiB at 0x00000000bec00000
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000bfffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0xbfe96a00-0xbfe984ff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000080000000-0x00000000bfffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x0000000085ffffff]
[ 0.000000] node 0: [mem 0x0000000089f00000-0x000000008e9fffff]
[ 0.000000] node 0: [mem 0x000000008eb00000-0x00000000bfffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000bfffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] random: fast init done
[ 0.000000] percpu: Embedded 23 pages/cpu @ffff80003fe35000 s55704 r8192 d30312 u94208
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM errata 826319, 827319, 824069
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 241920
[ 0.000000] Policy zone: DMA
[ 0.000000] Kernel command line: root=/dev/mmcblk1p9 rw rootwait console=tty0 console=ttyMSM0,115200n8 log_buf_len=4M androidboot.emmc=true androidboot.serialno=29b02e0a androidboot.baseband=apq mdss_mdp.panel=0:dsi:0:
[ 0.000000] log_buf_len: 4194304 bytes
[ 0.000000] early log buf free: 128624(98%)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Memory: 922096K/983040K available (10236K kernel code, 1548K rwdata, 4812K rodata, 1152K init, 422K bss, 44560K reserved, 16384K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB)
[ 0.000000] .text : 0xffff000008080000 - 0xffff000008a80000 ( 10240 KB)
[ 0.000000] .rodata : 0xffff000008a80000 - 0xffff000008f40000 ( 4864 KB)
[ 0.000000] .init : 0xffff000008f40000 - 0xffff000009060000 ( 1152 KB)
[ 0.000000] .data : 0xffff000009060000 - 0xffff0000091e3200 ( 1549 KB)
[ 0.000000] .bss : 0xffff0000091e3200 - 0xffff00000924cbe8 ( 423 KB)
[ 0.000000] fixed : 0xffff7dfffe7fb000 - 0xffff7dfffec00000 ( 4116 KB)
[ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB)
[ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum)
[ 0.000000] 0xffff7e0000000000 - 0xffff7e0001000000 ( 16 MB actual)
[ 0.000000] memory : 0xffff800000000000 - 0xffff800040000000 ( 1024 MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000004] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000712] Console: colour dummy device 80x25
[ 0.001466] console [tty0] enabled
[ 0.001534] Calibrating delay loop (skipped), value calculated using timer frequency… 38.40 BogoMIPS (lpj=76800)
[ 0.001567] pid_max: default: 32768 minimum: 301
[ 0.001666] Security Framework initialized
[ 0.002218] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.002501] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.002545] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.002574] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.019302] ASID allocator initialised with 65536 entries
[ 0.027293] Hierarchical SRCU implementation.
[ 0.039844] EFI services will not be available.
[ 0.047766] smp: Bringing up secondary CPUs …
[ 0.076045] Detected VIPT I-cache on CPU1
[ 0.076094] CPU1: Booted secondary processor [410fd030]
[ 0.104097] Detected VIPT I-cache on CPU2
[ 0.104137] CPU2: Booted secondary processor [410fd030]
[ 0.132165] Detected VIPT I-cache on CPU3
[ 0.132200] CPU3: Booted secondary processor [410fd030]
[ 0.132276] smp: Brought up 1 node, 4 CPUs
[ 0.132355] SMP: Total of 4 processors activated.
[ 0.132372] CPU features: detected feature: 32-bit EL0 Support
[ 0.132597] CPU: All CPU(s) started at EL1
[ 0.132625] alternatives: patching kernel code
[ 0.133374] devtmpfs: initialized
[ 0.144806] Registered cp15_barrier emulation handler
[ 0.144839] Registered setend emulation handler
[ 0.145112] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.145185] futex hash table entries: 1024 (order: 5, 131072 bytes)
[ 0.145929] pinctrl core: initialized pinctrl subsystem
[ 0.148094] DMI not present or invalid.
[ 0.148528] NET: Registered protocol family 16
[ 0.151210] cpuidle: using governor menu
[ 0.152914] vdso: 2 pages (1 code @ ffff000008a86000, 1 data @ ffff000009065000)
[ 0.152949] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.154208] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.154752] Serial: AMBA PL011 UART driver
[ 0.188561] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.189596] ACPI: Interpreter disabled.
[ 0.191529] vgaarb: loaded
[ 0.191820] SCSI subsystem initialized
[ 0.192286] usbcore: registered new interface driver usbfs
[ 0.192383] usbcore: registered new interface driver hub
[ 0.192482] usbcore: registered new device driver usb
[ 0.193646] pps_core: LinuxPPS API ver. 1 registered
[ 0.193665] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
[ 0.193706] PTP clock support registered
[ 0.193894] EDAC MC: Ver: 3.0.0
[ 0.194208] dmi: Firmware registration failed.
[ 0.196183] Advanced Linux Sound Architecture Driver Initialized.
[ 0.197655] clocksource: Switched to clocksource arch_sys_counter
[ 0.197820] VFS: Disk quotas dquot_6.6.0
[ 0.197890] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.198078] pnp: PnP ACPI: disabled
[ 0.205925] NET: Registered protocol family 2
[ 0.206460] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.206585] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.206767] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.206909] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.206965] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.207143] NET: Registered protocol family 1
[ 0.207452] RPC: Registered named UNIX socket transport module.
[ 0.207471] RPC: Registered udp transport module.
[ 0.207485] RPC: Registered tcp transport module.
[ 0.207499] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.207683] Unpacking initramfs…
[ 0.436885] Freeing initrd memory: 3908K
[ 0.437831] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.438174] kvm [1]: HYP mode not available
[ 0.439610] audit: initializing netlink subsys (disabled)
[ 0.439731] audit: type=2000 audit(0.435:1): state=initialized audit_enabled=0 res=1
[ 0.440095] workingset: timestamp_bits=44 max_order=18 bucket_order=0
[ 0.447437] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.448148] NFS: Registering the id_resolver key type
[ 0.448186] Key type id_resolver registered
[ 0.448201] Key type id_legacy registered
[ 0.448222] nfs4filelayout_init: NFSv4 File Layout Driver Registering…
[ 0.448393] 9p: Installing v9fs 9p2000 file system support
[ 0.451252] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.451400] io scheduler noop registered
[ 0.451644] io scheduler cfq registered (default)
[ 0.451663] io scheduler mq-deadline registered
[ 0.451677] io scheduler kyber registered
[ 0.473929] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.476482] SuperH (H)SCI(F) driver initialized
[ 0.477203] msm_serial 78af000.serial: msm_serial: detected port #1
[ 0.477313] msm_serial 78af000.serial: uartclk = 19200000
[ 0.477389] 78af000.serial: ttyMSM1 at MMIO 0x78af000 (irq = 9, base_baud = 1200000) is a MSM
[ 0.478227] msm_serial 78b0000.serial: msm_serial: detected port #0
[ 0.478321] msm_serial 78b0000.serial: uartclk = 7372800
[ 0.478391] 78b0000.serial: ttyMSM0 at MMIO 0x78b0000 (irq = 10, base_baud = 460800) is a MSM
[ 0.478428] msm_serial: console setup on port #0
[ 1.328268] console [ttyMSM0] enabled
[ 1.333471] msm_serial: driver initialized
[ 1.337780] qcom-iommu 1ef0000.iommu: iommu sec: pgtable size: 94208
[ 1.352731] loop: module loaded
[ 1.357115] spi_qup 78b7000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[ 1.358333] spi_qup 78b9000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[ 1.364536] spmi spmi-0: PMIC arbiter version v2 (0x20010000)
[ 1.378670] s1: supplied by regulator-dummy
[ 1.379012] s2: supplied by regulator-dummy
[ 1.381993] s3: supplied by regulator-dummy
[ 1.386102] s4: supplied by regulator-dummy
[ 1.390213] l1: supplied by regulator-dummy
[ 1.394376] l2: supplied by regulator-dummy
[ 1.398570] l3: supplied by regulator-dummy
[ 1.402716] l4: supplied by regulator-dummy
[ 1.406869] l5: supplied by regulator-dummy
[ 1.411062] l6: supplied by regulator-dummy
[ 1.415205] l7: supplied by regulator-dummy
[ 1.419394] l8: supplied by regulator-dummy
[ 1.423558] l9: supplied by regulator-dummy
[ 1.427700] l10: supplied by regulator-dummy
[ 1.431873] l11: supplied by regulator-dummy
[ 1.436404] l12: supplied by regulator-dummy
[ 1.440642] l13: supplied by regulator-dummy
[ 1.444891] l14: supplied by regulator-dummy
[ 1.449181] l15: supplied by regulator-dummy
[ 1.453406] l16: supplied by regulator-dummy
[ 1.457669] l17: supplied by regulator-dummy
[ 1.461925] l18: supplied by regulator-dummy
[ 1.467166] libphy: Fixed MDIO Bus: probed
[ 1.470822] tun: Universal TUN/TAP device driver, 1.6
[ 1.475784] e1000e: Intel® PRO/1000 Network Driver - 3.2.6-k
[ 1.479250] e1000e: Copyright© 1999 - 2015 Intel Corporation.
[ 1.485026] igb: Intel® Gigabit Ethernet Network Driver - version 5.4.0-k
[ 1.490791] igb: Copyright © 2007-2014 Intel Corporation.
[ 1.497779] igbvf: Intel® Gigabit Virtual Function Network Driver - version 2.4.0-k
[ 1.503295] igbvf: Copyright © 2009 - 2012 Intel Corporation.
[ 1.511789] sky2: driver version 1.30
[ 1.517577] usbcore: registered new interface driver rtl8150
[ 1.520867] usbcore: registered new interface driver r8152
[ 1.526591] usbcore: registered new interface driver asix
[ 1.531889] usbcore: registered new interface driver ax88179_178a
[ 1.537497] VFIO - User Level meta-driver version: 0.3
[ 1.545242] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 1.548453] ehci-pci: EHCI PCI platform driver
[ 1.554987] ehci-platform: EHCI generic platform driver
[ 1.559572] ehci-orion: EHCI orion driver
[ 1.564634] ehci-exynos: EHCI EXYNOS driver
[ 1.568795] ehci-msm: Qualcomm On-Chip EHCI Host Controller
[ 1.572776] ohci_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver
[ 1.578214] ohci-pci: OHCI PCI platform driver
[ 1.584501] ohci-platform: OHCI generic platform driver
[ 1.589043] ohci-exynos: OHCI EXYNOS driver
[ 1.594725] usbcore: registered new interface driver usb-storage
[ 1.598259] usbcore: registered new interface driver usbserial
[ 1.604452] usbcore: registered new interface driver usbserial_generic
[ 1.610094] usbserial: USB Serial support registered for generic
[ 1.636968] usb3503 usb2513: switched to HUB mode
[ 1.636999] usb3503 usb2513: usb3503_probe: probed in hub mode
[ 1.653443] msm_hsusb 78d9000.usb: 78d9000.usb supply vbus not found, using dummy regulator
[ 1.656150] input: pm8941_pwrkey as /devices/platform/soc/200f000.spmi/spmi-0/0-00/200f000.spmi:pm8916@0:pwrkey@800/input/input0
[ 1.661824] rtc-pm8xxx 200f000.spmi:pm8916@0:rtc@6000: Invalid time read from RTC
[ 1.672613] rtc-pm8xxx 200f000.spmi:pm8916@0:rtc@6000: rtc core: registered pm8xxx_rtc as rtc0
[ 1.680682] i2c /dev entries driver
[ 1.689255] i2c_qup 78b6000.i2c: using default clock-frequency 100000
[ 1.691703] i2c_qup 78b6000.i2c:
[ 1.691703] tx channel not available
[ 1.698989] i2c_qup 78b8000.i2c: using default clock-frequency 100000
[ 1.705073] i2c_qup 78b8000.i2c:
[ 1.705073] tx channel not available
[ 1.712475] i2c_qup 78ba000.i2c: using default clock-frequency 100000
[ 1.718436] i2c_qup 78ba000.i2c:
[ 1.718436] tx channel not available
[ 1.729358] qcom-tsens 4a8000.thermal-sensor: tsens calibration failed
[ 1.733934] sdhci: Secure Digital Host Controller Interface driver
[ 1.738403] sdhci: Copyright© Pierre Ossman
[ 1.744857] Synopsys Designware Multimedia Card Interface Driver
[ 1.750379] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.757792] sdhci_msm 7864900.sdhci: Got CD GPIO
[ 1.764030] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.766630] usbcore: registered new interface driver usbhid
[ 1.771323] usbhid: USB HID core driver
[ 1.779805] usbcore: registered new interface driver snd-usb-audio
[ 1.781970] NET: Registered protocol family 10
[ 1.787370] Segment Routing with IPv6
[ 1.791152] NET: Registered protocol family 17
[ 1.794895] 9pnet: Installing 9P2000 support
[ 1.799278] Key type dns_resolver registered
[ 1.804628] registered taskstats version 1
[ 1.828065] s1: supplied by regulator-dummy
[ 1.828128] s1: Bringing 0uV into 375000-375000uV
[ 1.831131] msm_hsusb 78d9000.usb: 78d9000.usb supply vbus not found, using dummy regulator
[ 1.840659] s2: supplied by regulator-dummy
[ 1.844327] s3: supplied by regulator-dummy
[ 1.849616] sdhci_msm 7864900.sdhci: Got CD GPIO
[ 1.853029] s3: Bringing 0uV into 375000-375000uV
[ 1.859420] s4: supplied by regulator-dummy
[ 1.860021] input: gpio_keys as /devices/platform/gpio_keys/input/input1
[ 1.860713] ALSA device list:
[ 1.860716] No soundcards found.
[ 1.863809] sdhci_msm 7864900.sdhci: Got CD GPIO
[ 1.879025] s4: Bringing 0uV into 1800000-1800000uV
[ 1.879587] l1: supplied by s3
[ 1.879639] l1: Bringing 0uV into 375000-375000uV
[ 1.880037] l2: supplied by s3
[ 1.880065] l2: Bringing 0uV into 1200000-1200000uV
[ 1.880513] l3: supplied by s3
[ 1.880540] l3: Bringing 0uV into 375000-375000uV
[ 1.880952] l4: supplied by s4
[ 1.881000] l4: Bringing 0uV into 1750000-1750000uV
[ 1.881378] l5: supplied by s4
[ 1.881403] l5: Bringing 0uV into 1750000-1750000uV
[ 1.881872] l6: supplied by s4
[ 1.881904] l6: Bringing 0uV into 1800000-1800000uV
[ 1.882294] l7: supplied by s4
[ 1.882340] l7: Bringing 0uV into 1750000-1750000uV
[ 1.882773] l8: supplied by regulator-dummy
[ 1.882799] l8: Bringing 0uV into 1750000-1750000uV
[ 1.883219] l9: supplied by regulator-dummy
[ 1.883246] l9: Bringing 0uV into 1750000-1750000uV
[ 1.883667] l10: supplied by regulator-dummy
[ 1.883714] l10: Bringing 0uV into 1750000-1750000uV
[ 1.884019] l11: supplied by regulator-dummy
[ 1.884044] l11: Bringing 0uV into 1750000-1750000uV
[ 1.884370] l12: supplied by regulator-dummy
[ 1.884395] l12: Bringing 0uV into 1750000-1750000uV
[ 1.884744] l13: supplied by regulator-dummy
[ 1.884792] l13: Bringing 0uV into 1750000-1750000uV
[ 1.885124] l14: supplied by regulator-dummy
[ 1.885149] l14: Bringing 0uV into 1750000-1750000uV
[ 1.885460] l15: supplied by regulator-dummy
[ 1.885485] l15: Bringing 0uV into 1750000-1750000uV
[ 1.886217] l16: supplied by regulator-dummy
[ 1.886262] l16: Bringing 0uV into 1750000-1750000uV
[ 1.886576] l17: supplied by regulator-dummy
[ 1.886601] l17: Bringing 0uV into 3300000-3300000uV
[ 1.887550] l18: supplied by regulator-dummy
[ 1.887575] l18: Bringing 0uV into 1750000-1750000uV
[ 1.945771] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using ADMA 64-bit
[ 1.947222] sdhci_msm 7864900.sdhci: Got CD GPIO
[ 2.002101] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using ADMA 64-bit
[ 2.023144] ci_hdrc ci_hdrc.0: EHCI Host Controller
[ 2.023236] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
[ 2.023343] mmc0: new HS200 MMC card at address 0001
[ 2.023842] mmcblk0: mmc0:0001 Q2J95Q 7.28 GiB
[ 2.024329] mmcblk0boot0: mmc0:0001 Q2J95Q partition 1 4.00 MiB
[ 2.024557] mmcblk0boot1: mmc0:0001 Q2J95Q partition 2 4.00 MiB
[ 2.024806] mmcblk0rpmb: mmc0:0001 Q2J95Q partition 3 4.00 MiB
[ 2.029130] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10
[ 2.045671] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
[ 2.046300] hub 1-0:1.0: USB hub found
[ 2.046327] hub 1-0:1.0: 1 port detectedÍ[ 2.122924] Freeing unused kernel memory: 1152K
Loading, please wait…
starting version 236
[ 2.377774] usb 1-1: new high-speed USB device number 2 using ci_hdrc
[ 2.536109] hub 1-1:1.0: USB hub found
[ 2.536478] hub 1-1:1.0: 4 ports detected
Begin: Loading essential drivers … done.
Begin: Running /scripts/init-premount … done.
Begin: Mounting root file system … Begin: Running /scripts/local-top … done.
Begin: Running /scripts/local-premount … done.
Begin: Waiting for root file system … [ 2.830019] usb 1-1.2: new low-speed USB device number 3 using ci_hdrc
[ 2.956760] input: Logitech USB Mouse as /devices/platform/soc/78d9000.usb/ci_hdrc.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C00C.0001/input/input2
[ 2.957137] hid-generic 0003:046D:C00C.0001: input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-ci_hdrc.0-1.2/input0
[ 3.046008] usb 1-1.3: new high-speed USB device number 4 using ci_hdrc
Begin: Running /scripts/local-block … done.
Begin: Running /scripts/local-block … done.
Begin: Running /scripts/local-block … done.
Begin: Running /scripts/local-block … done.
Begin: Running /scripts/local-block … done.
Begin: Running /scripts/local-block … done.
Begin: Running /scripts/local-block … done.
Begin: Running /scripts/local-block … done.
Begin: Running /scripts/local-block … done.
Begin: Running /scripts/local-block … done.
Begin: Running /scripts/local-block … done.
Begin: Running /scripts/local-block … done.
Begin: Running /scripts/local-block … done.
Begin: Running /scripts/local-block … done.
Begin: Running /scripts/local-block … done.
Begin: Running /scripts/local-block … done.
Begin: Running /scripts/local-block … done.
Begin: Running /scripts/local-block … done.
Begin: Running /scripts/local-block … done.
Begin: Running /scripts/local-block … done.
Begin: Running /scripts/local-block … done.
Begin: Running /scripts/local-block … done.
Begin: Running /scripts/local-block … done.
Begin: Running /scripts/local-block … done.
Begin: Running /scripts/local-block … done.
Begin: Running /scripts/local-block … done.
Begin: Running /scripts/local-block … done.
Begin: Running /scripts/local-block … done.
Begin: Running /scripts/local-block … done.
Begin: Running /scripts/local-block … done.
Begin: Running /scripts/local-block … done.
done.
Gave up waiting for root file system device. Common problems:

  • Boot args (cat /proc/cmdline)
    • Check rootdelay= (did the system wait long enough?)
  • Missing modules (cat /proc/modules; ls /dev)
    ALERT! /dev/mmcblk1p9 does not exist. Dropping to a shell!
    (initramfs) [ 74.753961] random: crng init done