No display on DSI panel

Hello,

I am trying to add support for DSI panel, I have used Debian 16.06 release.

simple panel driver is loaded correctly and did necessary changes to support it. I am not getting any display, I am able to turn on backlight of lcd.

Please guide me to solve this problem. I have turned on GPIO 32 to High to enable output to DSI panel.

On Android DSI panel works fine but debian I am not getting any error.

Below is log from my board.

[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.9-linaro-lt-qcom (einfochips@AHMCPU1923) (gcc version 4.9.3 20141031 (prerelease) (Linaro GCC 2014.11) ) #18 SMP PREEMPT Mon Jul 18 14:23:07 IST 2016
[ 0.000000] Boot CPU: AArch64 Processor [410fd030]
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: OVERLAP DETECTED!
[ 0.000000] hypervisor_region@86400000 (0x0000000086400000–0x0000000086800000) overlaps with rmtfs@86700000 (0x0000000086700000–0x00000000867e0000)
[ 0.000000] Reserved memory: OVERLAP DETECTED!
[ 0.000000] modem_adsp_region@86800000 (0x0000000086800000–0x000000008b000000) overlaps with wcnss@89300000 (0x0000000089300000–0x0000000089900000)
[ 0.000000] cma: Reserved 64 MiB at 0x00000000bc000000
[ 0.000000] PERCPU: Embedded 16 pages/cpu @ffffffc03bf3b000 s24960 r8192 d32384 u65536
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM errata 826319, 827319, 824069
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 234108
[ 0.000000] Kernel command line: root=/dev/disk/by-partlabel/rootfs rw rootwait console=ttyMSM0,115200n8 androidboot.emmc=true androidboot.serialno=ac87b5c androidboot.baseband=apq mdss_mdp.panel=0:dsi:0:
[ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 12288 bytes
[ 0.000000] log_buf_len min size: 16384 bytes
[ 0.000000] log_buf_len: 32768 bytes
[ 0.000000] early log buf free: 14348(87%)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] software IO TLB [mem 0xb6c00000-0xbac00000] (64MB) mapped at [ffffffc036c00000-ffffffc03abfffff]
[ 0.000000] Memory: 783824K/951296K available (8260K kernel code, 771K rwdata, 3724K rodata, 572K init, 270K bss, 101936K reserved, 65536K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)
[ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
[ 0.000000] 0xffffffbdc0000000 - 0xffffffbdc1000000 ( 16 MB actual)
[ 0.000000] fixed : 0xffffffbffa7fd000 - 0xffffffbffac00000 ( 4108 KB)
[ 0.000000] PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 MB)
[ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc040000000 ( 1024 MB)
[ 0.000000] .init : 0xffffffc000c37000 - 0xffffffc000cc6000 ( 572 KB)
[ 0.000000] .text : 0xffffffc000080000 - 0xffffffc000c363e4 ( 11993 KB)
[ 0.000000] .data : 0xffffffc000cdc000 - 0xffffffc000d9cc00 ( 771 KB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000004] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000446] Console: colour dummy device 80x25
[ 0.000465] Calibrating delay loop (skipped), value calculated using timer frequency… 38.40 BogoMIPS (lpj=76800)
[ 0.000476] pid_max: default: 32768 minimum: 301
[ 0.000546] Security Framework initialized
[ 0.000594] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.000603] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.001154] Initializing cgroup subsys io
[ 0.001170] Initializing cgroup subsys memory
[ 0.001192] Initializing cgroup subsys devices
[ 0.001203] Initializing cgroup subsys hugetlb
[ 0.001518] EFI services will not be available.
[ 0.001539] ASID allocator initialised with 65536 entries
[ 0.040001] Detected VIPT I-cache on CPU1
[ 0.040040] CPU1: Booted secondary processor [410fd030]
[ 0.051992] Detected VIPT I-cache on CPU2
[ 0.052023] CPU2: Booted secondary processor [410fd030]
[ 0.064013] Detected VIPT I-cache on CPU3
[ 0.064039] CPU3: Booted secondary processor [410fd030]
[ 0.064091] Brought up 4 CPUs
[ 0.064116] SMP: Total of 4 processors activated.
[ 0.064126] CPU: All CPU(s) started at EL1
[ 0.064150] alternatives: patching kernel code
[ 0.064740] devtmpfs: initialized
[ 0.083140] DMI not present or invalid.
[ 0.083430] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.085782] pinctrl core: initialized pinctrl subsystem
[ 0.086146] __platform_driver_register 586
[ 0.086412] __platform_driver_register 586
[ 0.086921] __platform_driver_register 586
[ 0.087006] __platform_driver_register 586
[ 0.087049] __platform_driver_register 586
[ 0.087092] __platform_driver_register 586
[ 0.087134] __platform_driver_register 586
[ 0.087481] NET: Registered protocol family 16
[ 0.088149] __platform_driver_register 586
[ 0.088204] __platform_driver_register 586
[ 0.088291] __platform_driver_register 586
[ 0.088515] __platform_driver_register 586
[ 0.088801] mipi_dsi_bus_init 1027
[ 0.088809] mipi_dsi_driver_register_full 1002
[ 0.088876] __platform_driver_register 586
[ 0.100178] cpuidle: using governor ladder
[ 0.112188] cpuidle: using governor menu
[ 0.112203] __platform_driver_register 586
[ 0.112493] vdso: 2 pages (1 code @ ffffffc000ce1000, 1 data @ ffffffc000ce0000)
[ 0.112525] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.113364] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.113379] __platform_driver_register 586
[ 0.113534] __platform_driver_register 586
[ 0.113571] Serial: AMBA PL011 UART driver
[ 0.113577] __platform_driver_register 586
[ 0.113648] __platform_driver_register 586
[ 0.113697] __platform_driver_register 586
[ 0.128391] irq: no irq domain found for /hexagon-smp2p/slave-kernel !
[ 0.129237] irq: no irq domain found for /wcnss-smp2p/slave-kernel !
[ 0.132752] irq: no irq domain found for /soc/qcom,mdss_mdp@1a00000 !
[ 0.165357] __platform_driver_register 586
[ 0.165593] msm_bus_fabric_init_driver
[ 0.165601] __platform_driver_register 586
[ 0.165772] msm_bus_device 580000.ad-hoc-bus: Dev 1024
[ 0.165790] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
[ 0.165800] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
[ 0.166063] msm_bus_device 580000.ad-hoc-bus: Dev 0
[ 0.166079] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
[ 0.166088] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
[ 0.166244] msm_bus_device 580000.ad-hoc-bus: Dev 4096
[ 0.166259] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
[ 0.166269] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
[ 0.172927] msm_bus_init_clk: Valid node clk node 1024 ctx 0
[ 0.172936] msm_bus_init_clk: Valid node clk node 1024 ctx 1msm_bus_init_clk: Valid node clk node 0 ctx 0
[ 0.173026] msm_bus_init_clk: Valid node clk node 0 ctx 1msm_bus_init_clk: Valid node clk node 4096 ctx 0
[ 0.173121] msm_bus_init_clk: Valid node clk node 4096 ctx 1__platform_driver_register 586
[ 0.202971] __platform_driver_register 586
[ 0.214271] __platform_driver_register 586
[ 0.215780] __platform_driver_register 586
[ 0.256743] __platform_driver_register 586
[ 0.260921] __platform_driver_register 586
[ 0.265387] vgaarb: loaded
[ 0.269203] SCSI subsystem initialized
[ 0.299316] usbcore: registered new interface driver usbfs
[ 0.300024] usbcore: registered new interface driver hub
[ 0.301469] usbcore: registered new device driver usb
[ 0.303900] media: Linux media interface: v0.10
[ 0.304669] Linux video capture interface: v2.00
[ 0.307383] dmi: Firmware registration failed.
[ 0.309819] Advanced Linux Sound Architecture Driver Initialized.
[ 0.318414] Bluetooth: Core ver 2.21
[ 0.318982] NET: Registered protocol family 31
[ 0.319023] Bluetooth: HCI device and connection manager initialized
[ 0.319257] Bluetooth: HCI socket layer initialized
[ 0.319368] Bluetooth: L2CAP socket layer initialized
[ 0.319644] Bluetooth: SCO socket layer initialized
[ 0.332618] clocksource: Switched to clocksource arch_sys_counter
[ 0.431376] NET: Registered protocol family 2
[ 0.438598] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.439813] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.444327] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.447363] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.447613] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.450743] NET: Registered protocol family 1
[ 0.455396] RPC: Registered named UNIX socket transport module.
[ 0.455450] RPC: Registered udp transport module.
[ 0.455463] RPC: Registered tcp transport module.
[ 0.455478] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.458330] Unpacking initramfs…
[ 1.053967] Freeing initrd memory: 3400K (ffffffc002000000 - ffffffc002352000)
[ 1.055869] __platform_driver_register 586
[ 1.061934] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 1.066613] kvm [1]: HYP mode not available
[ 1.079896] __platform_driver_register 586
[ 1.089953] futex hash table entries: 1024 (order: 5, 131072 bytes)
[ 1.093178] audit: initializing netlink subsys (disabled)
[ 1.094670] audit: type=2000 audit(1.087:1): initialized
[ 1.103666] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.211092] VFS: Disk quotas dquot_6.6.0
[ 1.213534] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.246474] NFS: Registering the id_resolver key type
[ 1.247226] Key type id_resolver registered
[ 1.247246] Key type id_legacy registered
[ 1.250419] fuse init (API version 7.23)
[ 1.258276] 9p: Installing v9fs 9p2000 file system support
[ 1.274755] io scheduler noop registered
[ 1.277708] io scheduler cfq registered (default)
[ 1.278820] __platform_driver_register 586
[ 1.283212] __platform_driver_register 586
[ 1.285023] __platform_driver_register 586
[ 1.286196] __platform_driver_register 586
[ 1.287003] __platform_driver_register 586
[ 1.287718] __platform_driver_register 586
[ 1.288712] __platform_driver_register 586
[ 1.289416] __platform_driver_register 586
[ 1.289992] __platform_driver_register 586
[ 1.291219] __platform_driver_register 586
[ 1.295318] __platform_driver_register 586
[ 1.296309] __platform_driver_register 586
[ 1.297181] __platform_driver_register 586
[ 1.297780] __platform_driver_register 586
[ 1.298948] gpio_backlight_probe 96
[ 1.303084] __platform_driver_register 586
[ 1.325763] __platform_driver_register 586
[ 1.327249] __platform_driver_register 586
[ 1.328770] __platform_driver_register 586
[ 1.329558] __platform_driver_register 586
[ 1.338409] __platform_driver_register 586
[ 1.344344] __platform_driver_register 586
[ 1.346138] __platform_driver_register 586
[ 1.346960] __platform_driver_register 586
[ 1.347751] __platform_driver_register 586
[ 1.350206] __platform_driver_register 586
[ 1.351044] __platform_driver_register 586
[ 1.385845] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.396276] __platform_driver_register 586
[ 1.401347] __platform_driver_register 586
[ 1.403789] __platform_driver_register 586
[ 1.405231] __platform_driver_register 586
[ 1.406724] __platform_driver_register 586
[ 1.409501] msm_serial 78af000.serial: msm_serial: detected port #1
[ 1.412734] msm_serial 78af000.serial: uartclk = 3686400
[ 1.413816] 78af000.serial: ttyMSM1 at MMIO 0x78af000 (irq = 137, base_baud = 230400) is a MSM
[ 1.418442] msm_serial 78b0000.serial: msm_serial: detected port #0
[ 1.419220] msm_serial 78b0000.serial: uartclk = 3686400
[ 1.419699] 78b0000.serial: ttyMSM0 at MMIO 0x78b0000 (irq = 138, base_baud = 230400) is a MSM
[ 1.419840] msm_serial: console setup on port #0
[ 2.564163] console [ttyMSM0] enabled
[ 2.572359] msm_serial: driver initialized
[ 2.572795] __platform_driver_register 586
[ 2.578145] __platform_driver_register 586
[ 2.583397] [drm] Initialized drm 1.1.0 20060810
[ 2.584329] __platform_driver_register 586
[ 2.591499] dsi_phy_driver_probe 290
[ 2.596928] l6: supplied by s4
[ 2.602513] dsi_phy_driver_probe 359
[ 2.603540] __platform_driver_register 586
[ 2.607197] __platform_driver_register 586
[ 2.610053] __platform_driver_register 586
[ 2.614094] __platform_driver_register 586
[ 2.619646] __platform_driver_register 586
[ 2.623953] msm_pdev_probe 1123
[ 2.636786] of_graph_get_next_endpoint(): no port node found in /soc/qcom,mdss_dsi@1a98000
[ 2.639255] 1a98000.qcom,mdss_dsi supply gdsc not found, using dummy regulator
[ 2.645226] 1a98000.qcom,mdss_dsi supply gdsc not found, using dummy regulator
[ 2.654765] l2: supplied by s3
[ 2.663759] msm 1a00000.qcom,mdss_mdp: bound 1a98000.qcom,mdss_dsi (ops dsi_ops)
[ 2.664093] msm 1a00000.qcom,mdss_mdp: bound 1c00000.qcom,adreno-3xx (ops a3xx_ops)
[ 2.671057] 1a00000.qcom,mdss_mdp supply vdd not found, using dummy regulator
[ 2.695883] msm 1a00000.qcom,mdss_mdp: couldn’t get mdp_0 context
[ 2.705514] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.705687] [drm] No driver support for vblank timestamp query.
[ 2.713002] msm 1a00000.qcom,mdss_mdp: No connectors reported connected with modes
[ 2.717148] [drm] Cannot find any crtc or sizes - going 1024x768
[ 2.873389] Console: switching to colour frame buffer device 128x48
[ 2.941581] msm 1a00000.qcom,mdss_mdp: fb0: msm frame buffer device
[ 2.956852] [drm] Initialized msm 1.0.0 20130625 on minor 0
[ 2.959972] __platform_driver_register 586
[ 2.965475] mipi_dsi_driver_register_full 1002
[ 2.966622] panel_simple_dsi_probe 1512 truely,ssd8020m
[ 2.974677] panel_simple_probe 335
[ 3.065361] loop: module loaded
[ 3.070833] __platform_driver_register 586
[ 3.075438] __platform_driver_register 586
[ 3.077028] __platform_driver_register 586
[ 3.079430] __platform_driver_register 586
[ 3.083228] __platform_driver_register 586
[ 3.087384] __platform_driver_register 586
[ 3.104020] spi_qup 78b7000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[ 3.115460] spi_qup 78b9000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[ 3.121741] __platform_driver_register 586
[ 3.124274] spmi spmi-0: PMIC Arb Version-2 (0x20010000)
[ 3.213039] tun: Universal TUN/TAP device driver, 1.6
[ 3.213297] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 3.220568] __platform_driver_register 586
[ 3.226410] sky2: driver version 1.30
[ 3.228167] __platform_driver_register 586
[ 3.232710] __platform_driver_register 586
[ 3.236865] usbcore: registered new interface driver asix
[ 3.240143] usbcore: registered new interface driver ax88179_178a
[ 3.245257] usbcore: registered new interface driver cdc_ether
[ 3.251161] usbcore: registered new interface driver dm9601
[ 3.256971] usbcore: registered new interface driver smsc75xx
[ 3.262350] usbcore: registered new interface driver net1080
[ 3.268286] usbcore: registered new interface driver plusb
[ 3.273979] usbcore: registered new interface driver cdc_subset
[ 3.279277] usbcore: registered new interface driver zaurus
[ 3.285527] usbcore: registered new interface driver cdc_ncm
[ 3.290341] __platform_driver_register 586
[ 3.309350] __platform_driver_register 586
[ 3.315535] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 3.315804] ehci-pci: EHCI PCI platform driver
[ 3.321678] ehci-platform: EHCI generic platform driver
[ 3.325510] __platform_driver_register 586
[ 3.332170] ehci-msm: Qualcomm On-Chip EHCI Host Controller
[ 3.334811] __platform_driver_register 586
[ 3.342870] msm_hsusb_host 78d9000.ehci: unable to find transceiver
[ 3.345429] ohci_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver
[ 3.350723] ohci-pci: OHCI PCI platform driver
[ 3.357370] ohci-platform: OHCI generic platform driver
[ 3.361258] __platform_driver_register 586
[ 3.368235] usbcore: registered new interface driver cdc_acm
[ 3.370561] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 3.376947] usbcore: registered new interface driver usblp
[ 3.384476] usbcore: registered new interface driver cdc_wdm
[ 3.390058] usbcore: registered new interface driver uas
[ 3.395926] usbcore: registered new interface driver usb-storage
[ 3.401997] usbcore: registered new interface driver usbserial
[ 3.407016] usbcore: registered new interface driver usbserial_generic
[ 3.412714] usbserial: USB Serial support registered for generic
[ 3.419375] __platform_driver_register 586
[ 3.438278] usb3503 usb2513: switched to HUB mode
[ 3.438372] usb3503 usb2513: usb3503_probe: probed in hub mode
[ 3.442578] __platform_driver_register 586
[ 3.448435] __platform_driver_register 586
[ 3.452647] __platform_driver_register 586
[ 3.457748] __platform_driver_register 586
[ 3.460572] __platform_driver_register 586
[ 3.464786] __platform_driver_register 586
[ 3.468811] usbip_core: USB/IP Core v1.0.0
[ 3.472991] usbcore: registered new device driver usbip-host
[ 3.476433] usbip_host: USB/IP Host Driver v1.0.0
[ 3.486774] mousedev: PS/2 mouse device common for all mice
[ 3.490406] __platform_driver_register 586
[ 3.499161] input: pm8941_pwrkey as /devices/platform/soc/200f000.spmi/spmi-0/0-00/200f000.spmi:pm8916@0:pwrkey@800/input/input0
[ 3.502531] __platform_driver_register 586
[ 3.511375] __platform_driver_register 586
[ 3.518750] rtc-pm8xxx 200f000.spmi:pm8916@0:rtc@6000: rtc core: registered pm8xxx_rtc as rtc0
[ 3.519857] __platform_driver_register 586
[ 3.527658] i2c /dev entries driver
[ 3.531109] __platform_driver_register 586
[ 3.534759] __platform_driver_register 586
[ 3.538828] __platform_driver_register 586
[ 3.544679] i2c_qup 78b6000.i2c:
[ 3.544679] tx channel not available
[ 3.555579] i2c_qup 78b8000.i2c:
[ 3.555579] tx channel not available
[ 3.563568] pca953x 3-0020: failed reading register
[ 3.563810] pca953x: probe of 3-0020 failed with error -5
[ 3.569064] i2c_qup 78ba000.i2c:
[ 3.569064] tx channel not available
[ 3.587795] ov5645 1-0078: ov5645_s_power: on = 1
[ 3.587955] ov5645 1-0078: could not power up OV5645
[ 3.593393] __platform_driver_register 586
[ 3.599004] qcom-camss 1b0ac00.camss: notifier->num_subdevs = 1
[ 3.600918] qcom-camss 1b0ac00.camss: msm_csiphy_subdev_init: Enter
[ 3.607915] qcom-camss 1b0ac00.camss: msm_csiphy_subdev_init: Exit
[ 3.612672] qcom-camss 1b0ac00.camss: msm_csiphy_subdev_init: Enter
[ 3.619795] qcom-camss 1b0ac00.camss: msm_csiphy_subdev_init: Exit
[ 3.637848] qcom-camss 1b0ac00.camss: Cannot find iommu nonsecure ctx
[ 3.637952] qcom-camss 1b0ac00.camss: Fail to init vfe sub-device
[ 3.647326] __platform_driver_register 586
[ 3.655147] msm_cci_init_gpio_params:1371 gpio count 0
[ 3.657320] __platform_driver_register 586
[ 3.664242] __platform_driver_register 586
[ 3.669808] l3: supplied by s3
[ 3.673773] CPR closed loop is enabled
[ 3.676968] CPR is enabled!
[ 3.682086] __platform_driver_register 586
[ 3.685140] __platform_driver_register 586
[ 3.686733] __platform_driver_register 586
[ 3.690342] __platform_driver_register 586
[ 3.694239] __platform_driver_register 586
[ 3.700659] qcom-tsens 4a8000.thermal-sensor: tsens calibration failed
[ 3.702783] Bluetooth: HCI UART driver ver 2.3
[ 3.708072] Bluetooth: HCI UART protocol H4 registered
[ 3.712455] Bluetooth: HCI UART protocol BCSP registered
[ 3.717557] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 3.724044] usbcore: registered new interface driver btusb
[ 3.729116] __platform_driver_register 586
[ 3.735872] __platform_driver_register 586
[ 3.743517] cpu: dev_pm_opp_of_cpumask_add_table: couldn’t find opp table for cpu:0, -19
[ 3.754985] __platform_driver_register 586
[ 3.756820] __platform_driver_register 586
[ 3.760090] sdhci: Secure Digital Host Controller Interface driver
[ 3.762208] sdhci: Copyright(c) Pierre Ossman
[ 3.768654] Synopsys Designware Multimedia Card Interface Driver
[ 3.772776] __platform_driver_register 586
[ 3.779895] __platform_driver_register 586
[ 3.783963] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.786830] __platform_driver_register 586
[ 3.793207] __platform_driver_register 586
[ 3.818931] l5: supplied by s4
[ 3.864593] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using ADMA 64-bit
[ 3.869476] sdhci_msm 7864900.sdhci: Got CD GPIO
[ 3.929605] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using ADMA 64-bit
[ 3.932725] __platform_driver_register 586
[ 3.953369] mmc0: MAN_BKOPS_EN bit is not set
[ 3.962699] __platform_driver_register 586
[ 3.967244] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.967422] __platform_driver_register 586
[ 3.974103] mmc0: new HS200 MMC card at address 0001
[ 3.993761] usbcore: registered new interface driver usbhid
[ 3.993788] usbhid: USB HID core driver
[ 3.994501] mmcblk0: mmc0:0001 H8G1e 7.28 GiB
[ 3.995262] __platform_driver_register 586
[ 3.998279] mmcblk0boot0: mmc0:0001 H8G1e partition 1 4.00 MiB
[ 4.001048] mmcblk0boot1: mmc0:0001 H8G1e partition 2 4.00 MiB
[ 4.003538] mmcblk0rpmb: mmc0:0001 H8G1e partition 3 4.00 MiB
[ 4.025938] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10
[ 4.031630] 4080000.hexagon supply cx not found, using dummy regulator
[ 4.044232] 4080000.hexagon supply mss not found, using dummy regulator
[ 4.054201] l7: supplied by s4
[ 4.078758] remoteproc0: 4080000.hexagon is available
[ 4.078964] remoteproc0: Note: remoteproc is still under development and considered experimental.
[ 4.083048] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn’t yet guaranteed.
[ 4.093101] remoteproc0: Direct firmware load for mba.mbn failed with error -2
[ 4.103099] __platform_driver_register 586
[ 4.113950] qcom-tz-pil soc:vidc_tzpil@0: no crash reason id
[ 4.116808] soc:vidc_tzpil@0 supply qcom,pll not found, using dummy regulator
[ 4.119899] qcom-tz-pil soc:vidc_tzpil@0: failed to read qcom,pll_uV, skipping
[ 4.126523] qcom-tz-pil soc:vidc_tzpil@0: failed to read qcom,pll_uA, skipping
[ 4.133665] qcom-tz-pil soc:vidc_tzpil@0: no wdog IRQ defined
[ 4.140801] qcom-tz-pil soc:vidc_tzpil@0: no fatal IRQ defined
[ 4.146608] qcom-tz-pil soc:vidc_tzpil@0: no ready IRQ defined
[ 4.152344] qcom-tz-pil soc:vidc_tzpil@0: no handover IRQ defined
[ 4.158147] qcom-tz-pil soc:vidc_tzpil@0: no stop-ack IRQ defined
[ 4.164754] qcom-tz-pil soc:vidc_tzpil@0: Found relocation area 8388608@0x000000008f800000
[ 4.170842] remoteproc1: soc:vidc_tzpil@0 is available
[ 4.178539] remoteproc1: Note: remoteproc is still under development and considered experimental.
[ 4.183707] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn’t yet guaranteed.
[ 4.193790] remoteproc1: Direct firmware load for venus.mdt failed with error -2
[ 4.203205] remoteproc1: failed to load soc:vidc_tzpil@0
[ 4.204664] __platform_driver_register 586
[ 4.214729] a204000.wcnss supply vddcx not found, using dummy regulator
[ 4.224673] remoteproc2: a204000.wcnss is available
[ 4.226453] remoteproc2: Note: remoteproc is still under development and considered experimental.
[ 4.231732] remoteproc2: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn’t yet guaranteed.
[ 4.241330] remoteproc2: Direct firmware load for wcnss.mdt failed with error -2
[ 4.257408] __platform_driver_register 586
[ 4.269460] __platform_driver_register 586
[ 4.291059] coresight-tmc 825000.etf: TMC initialized
[ 4.334724] coresight-tmc 826000.etr: TMC initialized
[ 4.343080] coresight-tpiu 820000.tpiu: TPIU initialized
[ 4.350731] coresight-funnel 821000.funnel: FUNNEL initialized
[ 4.355590] coresight-funnel 841000.funnel: FUNNEL initialized
[ 4.356332] __platform_driver_register 586
[ 4.372737] coresight-etm4x 85c000.etm: ETM 4.0 initialized
[ 4.379259] coresight-etm4x 85d000.etm: ETM 4.0 initialized
[ 4.385821] coresight-etm4x 85e000.etm: ETM 4.0 initialized
[ 4.392186] coresight-etm4x 85f000.etm: ETM 4.0 initialized
[ 4.398402] coresight-replicator-qcom 824000.replicator: REPLICATOR 1.0 initialized
[ 4.399105] __platform_driver_register 586
[ 4.416603] usbcore: registered new interface driver snd-usb-audio
[ 4.420893] __platform_driver_register 586
[ 4.424270] __platform_driver_register 586
[ 4.426915] __platform_driver_register 586
[ 4.439177] __platform_driver_register 586
[ 4.440590] __platform_driver_register 586
[ 4.449635] apq8016-lpass-cpu 7708000.lpass-cpu: asoc_qcom_lpass_cpu_platform_probe() error getting mi2s-osr-clk: -2
[ 4.449900] apq8016-lpass-cpu 7708000.lpass-cpu: asoc_qcom_lpass_cpu_platform_probe() error getting mi2s-osr-clk: -2
[ 4.459526] apq8016-lpass-cpu 7708000.lpass-cpu: asoc_qcom_lpass_cpu_platform_probe() error getting mi2s-osr-clk: -2
[ 4.469983] apq8016-lpass-cpu 7708000.lpass-cpu: asoc_qcom_lpass_cpu_platform_probe() error getting mi2s-osr-clk: -2
[ 4.483739] __platform_driver_register 586
[ 4.495613] qcom-apq8016-sbc 7702000.sound: error getting codec phandle
[ 4.495724] qcom-apq8016-sbc 7702000.sound: Error resolving dai links: -22
[ 4.501663] qcom-apq8016-sbc: probe of 7702000.sound failed with error -22
[ 4.520649] NET: Registered protocol family 10
[ 4.532598] sit: IPv6 over IPv4 tunneling driver
[ 4.541108] NET: Registered protocol family 17
[ 4.542355] Bluetooth: RFCOMM TTY layer initialized
[ 4.544671] Bluetooth: RFCOMM socket layer initialized
[ 4.549562] Bluetooth: RFCOMM ver 1.11
[ 4.554613] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 4.558366] Bluetooth: HIDP socket layer initialized
[ 4.565120] 9pnet: Installing 9P2000 support
[ 4.570645] Key type dns_resolver registered
[ 4.574061] NET: Registered protocol family 42
[ 4.588206] registered taskstats version 1
[ 4.598941] msm_iommu 1f00000.qcom,iommu: invalid resource
[ 4.602172] msm_iommu 1f00000.qcom,iommu: iface: 100000000, core: 800000000
[ 4.603566] msm_iommu 1f00000.qcom,iommu: device gfx_iommu (model: 500) mapped at ffffff8000ac0000, with 2 ctx banks
[ 4.610863] msm_iommu 1f00000.qcom,iommu: iommu sec: pgtable size: 94208
[ 4.630072] genirq: Setting trigger mode 1 for irq 159 failed (gic_set_type+0x0/0x5c)
[ 4.630490] msm_iommu 1f00000.qcom,iommu: Request Global CFG IRQ 159 failed with ret=-22
[ 4.644068] msm_iommu_ctx 1f09000.qcom,iommu-ctx: context gfx3d_user using bank 1
[ 4.649867] msm_iommu_ctx 1f0a000.qcom,iommu-ctx: context gfx3d_priv using bank 2
[ 4.655132] msm_iommu 1e00000.qcom,iommu: iface: 100000000, core: 800000000
[ 4.660641] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at ffffff8006800000, with 20 ctx banks
[ 4.667610] genirq: Setting trigger mode 1 for irq 159 failed (gic_set_type+0x0/0x5c)
[ 4.677682] msm_iommu 1e00000.qcom,iommu: Request Global CFG IRQ 159 failed with ret=-22
[ 4.689138] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context jpeg_enc0 using bank 2
[ 4.696010] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context vfe using bank 3
[ 4.703156] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context mdp_0 using bank 4
[ 4.709681] msm_iommu_ctx 1e25000.venus_ns: context venus_ns using bank 5
[ 4.717625] msm_iommu_ctx 1e26000.qcom,iommu-ctx: context cpp using bank 6
[ 4.723524] msm_iommu_ctx 1e27000.qcom,iommu-ctx: context mDSP using bank 7
[ 4.730183] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context gss using bank 8
[ 4.737241] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context a2 using bank 9
[ 4.744229] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context mdp_1 using bank 18
[ 4.750958] msm_iommu_ctx 1e33000.venus_sec_pixel: context venus_sec_pixel using bank 19
[ 4.757824] msm_iommu_ctx 1e34000.venus_sec_bitstream: context venus_sec_bitstream using bank 20
[ 4.765978] msm_iommu_ctx 1e35000.venus_sec_non_pixel: context venus_sec_non_pixel using bank 21
[ 4.774682] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_fw using bank 22
[ 4.783509] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context periph_rpm using bank 23
[ 4.791128] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context periph_CE using bank 24
[ 4.799399] msm_iommu_ctx 1e39000.qcom,iommu-ctx: context periph_BLSP using bank 25
[ 4.806269] msm_iommu_ctx 1e3a000.qcom,iommu-ctx: context periph_SDC1 using bank 26
[ 4.813360] msm_iommu_ctx 1e3b000.qcom,iommu-ctx: context periph_SDC2 using bank 27
[ 4.821140] msm_iommu_ctx 1e3c000.qcom,iommu-ctx: context periph_audio using bank 28
[ 4.828950] msm_iommu_ctx 1e3d000.qcom,iommu-ctx: context periph_USB_HS1 using bank 29
[ 4.835898] gpio_backlight_probe 96
[ 4.842905] gpio_backlight_probe_dt 81
[ 4.845889] gpio_backlight_probe 120
[ 4.852097] panel_simple_dsi_probe 1512 truely,ssd8020m
[ 4.856710] panel_simple_probe 335
[ 4.859275] panel_simple_probe 386
[ 4.861886] panel_simple_probe 391
[ 4.865256] mipi_dsi_attach 308
[ 4.874958] msm_otg 78d9000.phy: OTG regs = ffffff800063e000
[ 4.877466] msm_otg 78d9000.phy: no vddcx
[ 4.996666] ov5645 1-0078: ov5645_s_power: on = 1
[ 4.996718] 1b0c000.qcom,cci supply qcom,gdscr-vdd not found, using dummy regulator
[ 5.000647] msm_cci_init:1016: hw_version = 0x10000008
[ 5.007838] ov5645 1-0078: ov5645_set_power_on: Enter
[ 5.052819] msm_cci_irq:1279 MASTER_0 error 0x8000000
[ 5.052862] ov5645 1-0078: ov5645_write_reg: write reg error -22: reg=3103, val=11
[ 5.056850] ov5645 1-0078: could not set init registers
[ 5.064312] ov5645 1-0078: ov5645_set_power_off: Enter
[ 5.069438] ov5645 1-0078: could not power up OV5645
[ 5.074749] ov5645: probe of 1-0078 failed with error -22
[ 5.080075] qcom-camss 1b0ac00.camss: notifier->num_subdevs = 1
[ 5.085093] qcom-camss 1b0ac00.camss: msm_csiphy_subdev_init: Enter
[ 5.091031] qcom-camss 1b0ac00.camss: msm_csiphy_subdev_init: Exit
[ 5.097202] qcom-camss 1b0ac00.camss: msm_csiphy_subdev_init: Enter
[ 5.103760] qcom-camss 1b0ac00.camss: msm_csiphy_subdev_init: Exit
[ 5.126114] __platform_driver_register 586
[ 5.126889] input: gpio_keys as /devices/platform/gpio_keys/input/input1
[ 5.129556] rtc-pm8xxx 200f000.spmi:pm8916@0:rtc@6000: setting system clock to 1970-01-01 01:20:53 UTC (4853)
[ 5.136421] msm_otg 78d9000.phy: Avail curr from USB = 100
[ 5.145861] ALSA device lis\FC[ 5.155293] Freeing unused kernel memory: 572K (ffffffc000c37000 - ffffffc000cc6000)
[ 5.155368] Freeing alternatives memory: 64K (ffffffc000cc6000 - ffffffc000cd6000)
Loading, please wait…
starting version 228
[ 5.206074] random: systemd-udevd urandom read with 9 bits of entropy available
Begin: Loading essential drivers … done.
Begin: Running /scripts/init-premount … done.
Begin: Mounting root file system … Begin: Running /scripts/local-top … done.
Begin: Running /scripts/local-premount … done.
Begin: Will now check root file system … fsck from util-linux 2.27.1
[/sbin/fsck.ext4 (1) – /dev/mmcblk0p10] fsck.ext4 -a -C0 /dev/mmcblk0p10
rootfs: recovering journal
rootfs: clean, 48885/437760 files, 291820/1850871 blocks
done.
[ 5.881510] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom … done.
Begin: Running /scripts/init-bottom … done.
[ 6.015948] systemd[1]: Failed to insert module ‘kdbus’: Function not implemented

Welcome to Debian GNU/Linux 8 (jessie)!

display-manager.service: Cannot add dependency job, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ OK ] Listening on udev Control Socket.
[ OK ] Set up automount Arbitrary Executab…ats File System Automount Point.
[ OK ] Listening on Journal Audit Socket.
[ OK ] Created slice System Slice.
[ OK ] Created slice system-getty.slice.
[ OK ] Reached target Encrypted Volumes.
[ OK ] Started Forward Password Requests to Wall Directory Watch.
[ OK ] Created slice User and Session Slice.
[ OK ] Reached target Slices.
[ OK ] Listening on udev Kernel Socket.
[ OK ] Listening on Journal Socket (/dev/log).
[ OK ] Listening on Syslog Socket.
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
[ OK ] Reached target Remote File Systems (Pre).
[ OK ] Reached target Remote File Systems.
[ OK ] Created slice system-serial\x2dgetty.slice.
[ OK ] Listening on Journal Socket.
Starting Create list of required st… nodes for the current kernel…
Starting Nameserver information manager…
Starting Journal Service…
Mounting POSIX Message Queue File System…
Mounting Huge Pages File System…
Starting Load Kernel Modules…
Starting LSB: Prepare console…
Mounting Debug File System…
[ OK ] Reached target Swap.
[ OK ] Started Create list of required sta…ce nodes for the current kernel.
[ OK ] Started Load Kernel Modules.
[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Mounted Huge Pages File System.
[ OK ] Mounted Debug File System.
[ OK ] Started Nameserver information manager.
[ OK ] Started Journal Service.
[ OK ] Started LSB: Prepare console.
Starting LSB: Set console font and keymap…
Mounting FUSE Control File System…
Starting Apply Kernel Variables…
Starting Create Static Device Nodes in /dev…
[ OK ] Mounted FUSE Control File System.
[ OK ] Started Apply Kernel Variables.
[ OK ] Started Create Static Device Nodes in /dev.
Starting udev Kernel Device Manager…
[ OK ] Started udev Kernel Device Manager.
Starting LSB: Set preliminary keymap…
[ 6.907007] cfg80211: World regulatory domain updated:
[ 6.907027] cfg80211: DFS Master region: unset
[ 6.911096] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 6.915636] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 6.925206] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 6.933036] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 6.941722] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mB\ED[ 6.958749] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 6.958754] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 6.958758] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ OK ] Started LSB: Set console font and keymap.
[ OK ] Started LSB: Set preliminary keymap.
Starting Remount Root and Kernel File Systems…
[ OK ] Started Remount Root and Kernel File Systems.
[ OK ] Reached target Local File Systems (Pre).
Starting udev Coldplug all Devices…
Starting Load/Save Random Seed…
[ OK ] Reached target Local File Systems.
Starting Tell Plymouth To Write Out Runtime Data…
Starting Flush Journal to Persistent Storage…
[ OK ] Started Load/Save Random Seed.
[ OK ] Started Tell Plymouth To Write Out Runtime Data.
[ 7.417174] systemd-journald[1431]: Received request to flush runtime journal from PID 1
[ OK ] Started Flush Journal to Persistent Storage.
Starting Create Volatile Files and Directories…
Starting LSB: Raise network interfaces…
[ OK ] Started Create Volatile Files and Directories.
Starting Network Time Synchronization…
Starting Update UTMP about System Boot/Shutdown…
[ OK ] Started Network Time Synchronization.
[ OK ] Started udev Coldplug all Devices.
[ 7.642958] remoteproc1: powering up soc:vidc_tzpil@0
[ 7.650611] remoteproc1: Booting fw image venus.mdt, size 6812
[ 7.651062] qcom-camss 1b0ac00.camss: ispif_set_power: Enter, on = 1
[ 7.659359] qcom-camss 1b0ac00.camss: ispif_set_power: Exit, on = 1
[ 7.665529] qcom-camss 1b0ac00.camss: msm_vfe_subdev_set_power: Enter, on = 1
[ OK 7.678221] qcom-camss 1b0ac00.camss: VFE HW Version = 0x10030000
0m] Started Update UTMP about System Boot/Shutdown.[ 7.685548] qcom-camss 1b0ac00.camss: ispif_set_power: Enter, on = 0

[ 7.696533] qcom-camss 1b0ac00.camss: msm_vfe_subdev_set_power: Enter, on = 0
[ 7.702537] qcom-camss 1b0ac00.camss: msm_vfe_subdev_set_power: Exit, on = 0
[ OK ] Created slice system-systemd\x2dbacklight.slice.
[ 7.824997] qcom-tz-pil soc:vidc_tzpil@0: start successful
[ 7.825196] remoteproc1: remote processor soc:vidc_tzpil@0 is now up
Starting Load/Save Screen Backlight…htness of backlight:backlight…
[ OK ] Started Dispatch Password Requests to Console Directory Watch.
[ OK ] Reached target System Time Synchronized.
[ OK ] Started Load/Save Screen Backlight Brightness of backlight:backlight.
[ OK ] Found device /dev/ttyMSM0.
[ OK ] Started LSB: Raise network interfaces…
[ OK ] Reached target System Initialization.
[ OK ] Started ACPI Events Check.
[ OK ] Listening on ACPID Listen Socket.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Reached target Timers.
[ OK ] Started Trigger resolvconf update for networkd DNS.
[ OK ] Reached target Paths.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
Starting Initialize hardware monitoring sensors…
Starting System Logging Service…
Starting LSB: Load kernel modules needed to enable cpufreq scaling…
[ OK ] Started Regular background program processing daemon.
Starting Start the WCN core…
Starting Restore /etc/resolv.conf i…e the ppp link was shut down…
Starting Permit User Sessions…
[ OK ] Started D-Bus System Message Bus.
[ 9.210775] __platform_driver_register 586
[ 9.218193] remoteproc2: powering up a204000.wcnss
[ 9.223906] remoteproc2: Booting fw image wcnss.mdt, size 7260
Starting Modem Manager…
Starting Login Service…
Starting Network Manager…
[ OK ] Started ACPI event daemon.
[ OK ] Reached target Network.
[ OK ] Reached target Network is Online.
Starting LSB: network benchmark…
Starting LSB: Advanced IEEE 802.11 management daemon…
Starting LSB: exim Mail Transport Agent…
[ OK ] Started OpenBSD Secure Shell server.
Starting /etc/rc.local Compatibility…
[ 10.031733] remoteproc2: remote processor a204000.wcnss is now up
[ OK ] Started System Logging Service.
[ OK ] Started LSB: Load kernel modules needed to enable cpufreq scaling.
[ OK ] Started Start the WCN core.
[ OK ] Started Restore /etc/resolv.conf if…ore the ppp link was shut down…
[ OK ] Started Permit User Sessions.
[ OK ] Started LSB: network benchmark.
[ OK ] Started LSB: Advanced IEEE 802.11 management daemon.
[ 10.254670] qcom_wcnss_ctrl pronto.wcnss: WCNSS Version 1.5 1.2
[ OK ] Started /etc/rc.local Compatibility.
[ OK ] Started Initialize hardware monitoring sensors.
[ OK ] Started Login Service.
Starting Authenticate and Authorize Users to Run Privileged Tasks…
[ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Starting Wait for Plymouth Boot Screen to Quit…
Starting Terminate Plymouth Boot Screen…
Starting LSB: set CPUFreq kernel parameters…
[ OK ] Started Wait for Plymouth Boot Screen to Quit.
[ OK ] Started Terminate Plymouth Boot Screen.
[ OK ] Started Authenticate and Authorize Users to Run Privileged Tasks.
[ OK ] Started LSB: set CPUFreq kernel parameters.
[ OK ] Started LSB: exim Mail Transport Agent.
[ OK ] Started Modem Manager.
[ OK ] Started Network Manager.
[ OK ] Started Serial Getty on ttyMSM0.
[ OK ] Started Getty on tty1.
[ OK ] Reached target Login Prompts.
[ OK ] Reached target Multi-User System.
[ OK ] Reached target Graphical Interface.
Starting Update UTMP about System Runlevel Changes…
[ OK ] Started Update UTMP about System Runlevel Changes.

Debian GNU/Linux 8 linaro-developer ttyMSM0

linaro-developer login: root (automatic login)

Last login: Wed Nov 18 07:59:10 UTC 2015 on ttyMSM0
Linux linaro-developer 4.4.9-linaro-lt-qcom #18 SMP PREEMPT Mon Jul 18 14:23:07 IST 2016 aarch64

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root@linaro-developer:~# [ 11.946482] wcn36xx: mac address: 02:00:0a:c8:7b:5c
[ 12.482581] wcn36xx: firmware WLAN version ‘WCN v2.0 RadioPhy vRhea_GF_1.12 with 19.2MHz XO’ and CRM version ‘CNSS-PR-2-0-1-2-c1-00010’
[ 12.482642] wcn36xx: firmware API 1.5.1.2, 41 stations, 2 bssids
[ 12.495191] wcn36xx: FW Cap MCC
[ 12.499848] wcn36xx: FW Cap P2P
[ 12.502698] wcn36xx: FW Cap SLM_SESSIONIZATION
[ 12.505819] wcn36xx: FW Cap DOT11AC_OPMODE
[ 12.510332] wcn36xx: FW Cap SAP32STA
[ 12.514408] wcn36xx: FW Cap TDLS
[ 12.518140] wcn36xx: FW Cap P2P_GO_NOA_DECOUPLE_INIT_SCAN
[ 12.521360] wcn36xx: FW Cap WLANACTIVE_OFFLOAD
[ 12.526650] wcn36xx: FW Cap BEACON_OFFLOAD
[ 12.530989] wcn36xx: FW Cap SCAN_OFFLOAD
[ 12.535070] wcn36xx: FW Cap BCN_MISS_OFFLOAD
[ 12.539149] wcn36xx: FW Cap STA_POWERSAVE
[ 12.543403] wcn36xx: FW Cap STA_ADVANCED_PWRSAVE
[ 12.547312] wcn36xx: FW Cap BCN_FILTER
[ 12.551996] wcn36xx: FW Cap RTT
[ 12.555553] wcn36xx: FW Cap RATECTRL
[ 12.558592] wcn36xx: FW Cap WOW
[ 12.562412] wcn36xx: FW Cap WLAN_ROAM_SCAN_OFFLOAD
[ 12.565279] wcn36xx: FW Cap SPECULATIVE_PS_POLL
[ 12.570140] wcn36xx: FW Cap IBSS_HEARTBEAT_OFFLOAD
[ 12.574596] wcn36xx: FW Cap WLAN_SCAN_OFFLOAD
[ 12.579431] wcn36xx: FW Cap WLAN_PERIODIC_TX_PTRN
[ 12.583856] wcn36xx: FW Cap ADVANCE_TDLS
[ 12.588554] wcn36xx: FW Cap BATCH_SCAN
[ 12.592534] wcn36xx: FW Cap FW_IN_TX_PATH
[ 12.596079] wcn36xx: FW Cap EXTENDED_NSOFFLOAD_SLOT
[ 12.600187] wcn36xx: FW Cap CH_SWITCH_V1
[ 12.604868] wcn36xx: FW Cap HT40_OBSS_SCAN
[ 12.609028] wcn36xx: FW Cap UPDATE_CHANNEL_LIST
[ 12.612934] wcn36xx: FW Cap WLAN_MCADDR_FLT
[ 12.617362] wcn36xx: FW Cap WLAN_CH144
[ 12.621528] wcn36xx: FW Cap TDLS_SCAN_COEXISTENCE
[ 12.625350] wcn36xx: FW Cap LINK_LAYER_STATS_MEAS
[ 12.630123] wcn36xx: FW Cap EXTENDED_SCAN
[ 12.634808] wcn36xx: FW Cap DYNAMIC_WMM_PS
[ 12.638802] wcn36xx: FW Cap MAC_SPOOFED_SCAN
[ 12.642796] wcn36xx: FW Cap FW_STATS
[ 12.647222] wcn36xx: FW Cap WPS_PRBRSP_TMPL
[ 12.650781] wcn36xx: FW Cap BCN_IE_FLT_DELTA
Minicom2.7Minicom2.7Minicom2.7Minicom2.7
-bash: Minicom2.7Minicom2.7Minicom2.7Minicom2.7: command not found
root@linaro-developer:~#
root@linaro-developer:~#
root@linaro-developer:~#
root@linaro-developer:~#
root@linaro-developer:~# ls
root@linaro-developer:~# ls -l
total 0
root@linaro-developer:~#
root@linaro-developer:~# [ 355.065560] random: nonblocking pool is initialized

hi,

you are getting this error of_graph_get_next_endpoint(): , ports are not configured properly.

you may need to add something like this in apq8016-sbc.dtsi

&mdss_dsi0 {
status = “ok”;

    painel@0 {
            reg = &lt;0&gt;;
            compatible = "truly,otm8018b";

            *-gpio = &lt;&amp;msmgpio 25 0&gt;;

            *-supply = &lt;&amp;pm8916_l6&gt;;
             .............
            port {
                    truly_in: endpoint {
                            remote-endpoint = &lt;&amp;dsi_out&gt;;
                    };
            };
    };

    port {
            dsi_out: endpoint {
                    remote-endpoint = &lt;&amp;truly_in&gt;;
            };
    };

};

Hello,

After doing above correction. It is failing at below location and board is getting rebooted.

Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.0-00261
S - IMAGE_VARIANT_STRING=HAAAANAAA
S - OEM_IMAGE_VERSION_STRING=C-BPATTH
S - Boot Config, 0x000002e1
S - Core 0 Frequency, 0 MHz
B - 1544 - PBL, Start
B - 3488 - bootable_media_detect_entry, Start
B - 51004 - bootable_media_detect_success, Start
B - 51009 - elf_loader_entry, Start
B - 52222 - auth_hash_seg_entry, Start
B - 52432 - auth_hash_seg_exit, Start
B - 66559 - elf_segs_hash_verify_entry, Start
B - 125437 - PBL, End
B - 132187 - SBL1, Start
B - 195200 - pm_device_init, Start
D - 14731 - pm_device_init, Delta
B - 210511 - boot_flash_init, Start
D - 30 - boot_flash_init, Delta
B - 214506 - boot_config_data_table_init, Start
D - 21868 - boot_config_data_table_init, Delta - (0 Bytes)
B - 240950 - CDT version:3,Platform ID:24,Major ID:1,Minor ID:0,Subtype:0
B - 247172 - sbl1_ddr_set_params, Start
B - 250862 - cpr_init, Start
D - 0 - cpr_init, Delta
B - 256474 - Pre_DDR_clock_init, Start
D - 183 - Pre_DDR_clock_init, Delta
D - 0 - sbl1_ddr_set_params, Delta
B - 268949 - pm_driver_init, Start
D - 6832 - pm_driver_init, Delta
B - 284443 - clock_init, Start
D - 61 - clock_init, Delta
B - 294569 - Image Load, Start
D - 22295 - QSEE Image Loaded, Delta - (460664 Bytes)
B - 316895 - Image Load, Start
D - 305 - SEC Image Loaded, Delta - (2048 Bytes)
B - 324093 - sbl1_efs_handle_cookies, Start
D - 91 - sbl1_efs_handle_cookies, Delta
B - 331870 - Image Load, Start
D - 10828 - QHEE Image Loaded, Delta - (51952 Bytes)
B - 342728 - Image Load, Start
D - 11987 - RPM Image Loaded, Delta - (149492 Bytes)
B - 354745 - Image Load, Start
D - 11803 - APPSBL Image Loaded, Delta - (488840 Bytes)
B - 366549 - QSEE Execution, Start
D - 91 - QSEE Execution, Delta
B - 372252 - SBL1, End
D - 242414 - SBL1, Delta
S - Flash Throughput, 116000 KB/s (1152996 Bytes, 9882 us)
S - DDR Frequency, 400 MHz
Android Bootloader - UART_DM Initialized!!!
[0] welcome to lk

[10] platform_init()
[10] target_init()
[40] SDHC Running in HS200 mode
[50] Done initialization of the card
[60] pm8x41_get_is_cold_boot: cold boot
[60] No ‘frp’ partition found
[60] Not able to search the panel:
[60] Display not enabled for 24 HW type
[70] Target panel init not found!
[70] pm8x41_get_is_cold_boot: cold boot
[70] partition misc doesn’t exist
[80] error in emmc_recovery_init
[80] Unable to locate /bootselect partition
[80] No ‘misc’ partition found
[90] Error reading MISC partition
[90] failed to get ffbm cookie[100] use_signed_kernel=0, is_unlocked=0, is_tampered=0.
[100] Loading boot image (17379328): start
[210] Loading boot image (17379328): done
[340] DTB Total entry: 15, DTB version: 2
[340] Using DTB entry 0x000000f7/00000000/0x00010018/0 for device 0x000000f7/00010000/0x00010018/0
[350] Using pmic info 0x2000b/0x0/0x0/0x0 for device 0x2000b/0x0/0x0/0x0
[360] target_display_panel_node:510: hw_id=24 panel_name=""
[360] cmdline: root=/dev/disk/by-partlabel/rootfs rw rootwait console=ttyMSM0,115200n8 androidboot.emmc=true androidboot.serialno=ac87b5c androidboot.baseband=apq mdss_mdp.panel=0:dsi:0:
[380] Updating device tree: start
[520] Setting mac address in DT: 2:0:a:c8:7b:5c
[530] Updating device tree: done
[530] booting linux @ 0x80080000, ramdisk @ 0x82000000 (3483799), tags/device tree @ 0x81e00000
[540] Jumping to kernel via monitor
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.9-linaro-lt-qcom (einfochips@AHMCPU1923) (gcc version 4.9.3 20141031 (prerelease) (Linaro GCC 2014.11) ) #18 SMP PREEMPT Mon Jul 18 14:23:07 IST 2016
[ 0.000000] Boot CPU: AArch64 Processor [410fd030]
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: OVERLAP DETECTED!
[ 0.000000] hypervisor_region@86400000 (0x0000000086400000–0x0000000086800000) overlaps with rmtfs@86700000 (0x0000000086700000–0x00000000867e0000)
[ 0.000000] Reserved memory: OVERLAP DETECTED!
[ 0.000000] modem_adsp_region@86800000 (0x0000000086800000–0x000000008b000000) overlaps with wcnss@89300000 (0x0000000089300000–0x0000000089900000)
[ 0.000000] cma: Reserved 64 MiB at 0x00000000bc000000
[ 0.000000] PERCPU: Embedded 16 pages/cpu @ffffffc03bf3a000 s24960 r8192 d32384 u65536
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM errata 826319, 827319, 824069
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 234108
[ 0.000000] Kernel command line: root=/dev/disk/by-partlabel/rootfs rw rootwait console=ttyMSM0,115200n8 androidboot.emmc=true androidboot.serialno=ac87b5c androidboot.baseband=apq mdss_mdp.panel=0:dsi:0:
[ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 12288 bytes
[ 0.000000] log_buf_len min size: 16384 bytes
[ 0.000000] log_buf_len: 32768 bytes
[ 0.000000] early log buf free: 14348(87%)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] software IO TLB [mem 0xb6c00000-0xbac00000] (64MB) mapped at [ffffffc036c00000-ffffffc03abfffff]
[ 0.000000] Memory: 783824K/951296K available (8260K kernel code, 771K rwdata, 3724K rodata, 572K init, 270K bss, 101936K reserved, 65536K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)
[ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
[ 0.000000] 0xffffffbdc0000000 - 0xffffffbdc1000000 ( 16 MB actual)
[ 0.000000] fixed : 0xffffffbffa7fd000 - 0xffffffbffac00000 ( 4108 KB)
[ 0.000000] PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 MB)
[ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc040000000 ( 1024 MB)
[ 0.000000] .init : 0xffffffc000c37000 - 0xffffffc000cc6000 ( 572 KB)
[ 0.000000] .text : 0xffffffc000080000 - 0xffffffc000c363e4 ( 11993 KB)
[ 0.000000] .data : 0xffffffc000cdc000 - 0xffffffc000d9cc00 ( 771 KB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000004] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000455] Console: colour dummy device 80x25
[ 0.000474] Calibrating delay loop (skipped), value calculated using timer frequency… 38.40 BogoMIPS (lpj=76800)
[ 0.000484] pid_max: default: 32768 minimum: 301
[ 0.000555] Security Framework initialized
[ 0.000604] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.000614] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.001170] Initializing cgroup subsys io
[ 0.001188] Initializing cgroup subsys memory
[ 0.001210] Initializing cgroup subsys devices
[ 0.001220] Initializing cgroup subsys hugetlb
[ 0.001539] EFI services will not be available.
[ 0.001562] ASID allocator initialised with 65536 entries
[ 0.040070] Detected VIPT I-cache on CPU1
[ 0.040110] CPU1: Booted secondary processor [410fd030]
[ 0.052056] Detected VIPT I-cache on CPU2
[ 0.052086] CPU2: Booted secondary processor [410fd030]
[ 0.064073] Detected VIPT I-cache on CPU3
[ 0.064100] CPU3: Booted secondary processor [410fd030]
[ 0.064154] Brought up 4 CPUs
[ 0.064179] SMP: Total of 4 processors activated.
[ 0.064188] CPU: All CPU(s) started at EL1
[ 0.064212] alternatives: patching kernel code
[ 0.064804] devtmpfs: initialized
[ 0.083312] DMI not present or invalid.
[ 0.083608] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.085924] pinctrl core: initialized pinctrl subsystem
[ 0.086279] __platform_driver_register 586
[ 0.086554] __platform_driver_register 586
[ 0.087088] __platform_driver_register 586
[ 0.087173] __platform_driver_register 586
[ 0.087217] __platform_driver_register 586
[ 0.087267] __platform_driver_register 586
[ 0.087310] __platform_driver_register 586
[ 0.087660] NET: Registered protocol family 16
[ 0.088377] __platform_driver_register 586
[ 0.088433] __platform_driver_register 586
[ 0.088511] __platform_driver_register 586
[ 0.088747] __platform_driver_register 586
[ 0.089033] mipi_dsi_bus_init 1027
[ 0.089040] mipi_dsi_driver_register_full 1002
[ 0.089108] __platform_driver_register 586
[ 0.100002] cpuidle: using governor ladder
[ 0.112011] cpuidle: using governor menu
[ 0.112026] __platform_driver_register 586
[ 0.112318] vdso: 2 pages (1 code @ ffffffc000ce1000, 1 data @ ffffffc000ce0000)
[ 0.112349] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.113191] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.113205] __platform_driver_register 586
[ 0.113355] __platform_driver_register 586
[ 0.113392] Serial: AMBA PL011 UART driver
[ 0.113398] __platform_driver_register 586
[ 0.113479] __platform_driver_register 586
[ 0.113527] __platform_driver_register 586
[ 0.128247] irq: no irq domain found for /hexagon-smp2p/slave-kernel !
[ 0.129102] irq: no irq domain found for /wcnss-smp2p/slave-kernel !
[ 0.132651] irq: no irq domain found for /soc/qcom,mdss_mdp@1a00000 !
[ 0.161279] __platform_driver_register 586
[ 0.161525] msm_bus_fabric_init_driver
[ 0.161533] __platform_driver_register 586
[ 0.161711] msm_bus_device 580000.ad-hoc-bus: Dev 1024
[ 0.161728] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
[ 0.161738] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
[ 0.162004] msm_bus_device 580000.ad-hoc-bus: Dev 0
[ 0.162019] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
[ 0.162028] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
[ 0.162181] msm_bus_device 580000.ad-hoc-bus: Dev 4096
[ 0.162196] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
[ 0.162205] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
[ 0.168729] msm_bus_init_clk: Valid node clk node 1024 ctx 0
[ 0.168736] msm_bus_init_clk: Valid node clk node 1024 ctx 1msm_bus_init_clk: Valid node clk node 0 ctx 0
[ 0.168824] msm_bus_init_clk: Valid node clk node 0 ctx 1msm_bus_init_clk: Valid node clk node 4096 ctx 0
[ 0.168916] msm_bus_init_clk: Valid node clk node 4096 ctx 1__platform_driver_register 586
[ 0.202131] __platform_driver_register 586
[ 0.215107] __platform_driver_register 586
[ 0.216891] __platform_driver_register 586
[ 0.262758] __platform_driver_register 586
[ 0.267395] __platform_driver_register 586
[ 0.271981] vgaarb: loaded
[ 0.275994] SCSI subsystem initialized
[ 0.308037] usbcore: registered new interface driver usbfs
[ 0.309062] usbcore: registered new interface driver hub
[ 0.310831] usbcore: registered new device driver usb
[ 0.313335] media: Linux media interface: v0.10
[ 0.314224] Linux video capture interface: v2.00
[ 0.317844] dmi: Firmware registration failed.
[ 0.320580] Advanced Linux Sound Architecture Driver Initialized.
[ 0.330595] Bluetooth: Core ver 2.21
[ 0.331280] NET: Registered protocol family 31
[ 0.331319] Bluetooth: HCI device and connection manager initialized
[ 0.331585] Bluetooth: HCI socket layer initialized
[ 0.331715] Bluetooth: L2CAP socket layer initialized
[ 0.332008] Bluetooth: SCO socket layer initialized
[ 0.346871] clocksource: Switched to clocksource arch_sys_counter
[ 0.457308] NET: Registered protocol family 2
[ 0.467986] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.469308] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.474579] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.478470] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.478955] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.482621] NET: Registered protocol family 1
[ 0.487665] RPC: Registered named UNIX socket transport module.
[ 0.487690] RPC: Registered udp transport module.
[ 0.487704] RPC: Registered tcp transport module.
[ 0.487717] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.490904] Unpacking initramfs…
[ 1.143215] Freeing initrd memory: 3400K (ffffffc002000000 - ffffffc002352000)
[ 1.145371] __platform_driver_register 586
[ 1.151670] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 1.156522] kvm [1]: HYP mode not available
[ 1.171103] __platform_driver_register 586
[ 1.184176] futex hash table entries: 1024 (order: 5, 131072 bytes)
[ 1.187806] audit: initializing netlink subsys (disabled)
[ 1.188657] audit: type=2000 audit(1.179:1): initialized
[ 1.199889] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.324465] VFS: Disk quotas dquot_6.6.0
[ 1.327182] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.365350] NFS: Registering the id_resolver key type
[ 1.366147] Key type id_resolver registered
[ 1.366172] Key type id_legacy registered
[ 1.369857] fuse init (API version 7.23)
[ 1.377918] 9p: Installing v9fs 9p2000 file system support
[ 1.395936] io scheduler noop registered
[ 1.399154] io scheduler cfq registered (default)
[ 1.400157] __platform_driver_register 586
[ 1.404828] __platform_driver_register 586
[ 1.406404] __platform_driver_register 586
[ 1.407598] __platform_driver_register 586
[ 1.408459] __platform_driver_register 586
[ 1.409205] __platform_driver_register 586
[ 1.409920] __platform_driver_register 586
[ 1.410774] __platform_driver_register 586
[ 1.411556] __platform_driver_register 586
[ 1.413297] __platform_driver_register 586
[ 1.417695] __platform_driver_register 586
[ 1.419214] __platform_driver_register 586
[ 1.420106] __platform_driver_register 586
[ 1.420835] __platform_driver_register 586
[ 1.422163] gpio_backlight_probe 96
[ 1.427057] __platform_driver_register 586
[ 1.453416] __platform_driver_register 586
[ 1.455411] __platform_driver_register 586
[ 1.456900] __platform_driver_register 586
[ 1.457654] __platform_driver_register 586
[ 1.467076] __platform_driver_register 586
[ 1.473709] __platform_driver_register 586
[ 1.475764] __platform_driver_register 586
[ 1.476609] __platform_driver_register 586
[ 1.477342] __platform_driver_register 586
[ 1.479562] __platform_driver_register 586
[ 1.480413] __platform_driver_register 586
[ 1.521739] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.533956] __platform_driver_register 586
[ 1.539104] __platform_driver_register 586
[ 1.541598] __platform_driver_register 586
[ 1.542941] __platform_driver_register 586
[ 1.544553] __platform_driver_register 586
[ 1.547493] msm_serial 78af000.serial: msm_serial: detected port #1
[ 1.550970] msm_serial 78af000.serial: uartclk = 3686400
[ 1.552245] 78af000.serial: ttyMSM1 at MMIO 0x78af000 (irq = 137, base_baud = 230400) is a MSM
[ 1.557243] msm_serial 78b0000.serial: msm_serial: detected port #0
[ 1.558052] msm_serial 78b0000.serial: uartclk = 3686400
[ 1.558548] 78b0000.serial: ttyMSM0 at MMIO 0x78b0000 (irq = 138, base_baud = 230400) is a MSM
[ 1.558884] msm_serial: console setup on port #0
[ 2.703234] console [ttyMSM0] enabled
[ 2.712006] msm_serial: driver initialized
[ 2.712295] __platform_driver_register 586
[ 2.717528] __platform_driver_register 586
[ 2.723031] [drm] Initialized drm 1.1.0 20060810
[ 2.723486] __platform_driver_register 586
[ 2.730780] dsi_phy_driver_probe 290
[ 2.736485] l6: supplied by s4
[ 2.743483] dsi_phy_driver_probe 359
[ 2.744748] __platform_driver_register 586
[ 2.748419] __platform_driver_register 586
[ 2.751124] __platform_driver_register 586
[ 2.755124] __platform_driver_register 586
[ 2.760797] __platform_driver_register 586
[ 2.765248] msm_pdev_probe 1123
[ 2.782267] 1a98000.qcom,mdss_dsi supply gdsc not found, using dummy regulator
[ 2.783726] 1a98000.qcom,mdss_dsi supply gdsc not found, using dummy regulator
[ 2.791629] l2: supplied by s3
[ 2.800139] msm_dsi_manager_register: failed to register mipi dsi host for DSI 0
[ 2.803598] msm 1a00000.qcom,mdss_mdp: failed to bind 1a98000.qcom,mdss_dsi (ops dsi_ops): -517
[ 2.813802] msm 1a00000.qcom,mdss_mdp: master bind failed: -517
[ 2.818048] __platform_driver_register 586
[ 2.825013] mipi_dsi_driver_register_full 1002
[ 2.921726] loop: module loaded
[ 2.927272] __platform_driver_register 586
[ 2.932096] __platform_driver_register 586
[ 2.933552] __platform_driver_register 586
[ 2.936067] __platform_driver_register 586
[ 2.939822] __platform_driver_register 586
[ 2.944038] __platform_driver_register 586
[ 2.962093] spi_qup 78b7000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[ 2.974735] spi_qup 78b9000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[ 2.981755] __platform_driver_register 586
[ 2.984915] spmi spmi-0: PMIC Arb Version-2 (0x20010000)
[ 3.081487] tun: Universal TUN/TAP device driver, 1.6
[ 3.081797] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 3.089416] __platform_driver_register 586
[ 3.095162] sky2: driver version 1.30
[ 3.096870] __platform_driver_register 586
[ 3.101249] __platform_driver_register 586
[ 3.105389] usbcore: registered new interface driver asix
[ 3.108698] usbcore: registered new interface driver ax88179_178a
[ 3.113803] usbcore: registered new interface driver cdc_ether
[ 3.119719] usbcore: registered new interface driver dm9601
[ 3.125581] usbcore: registered new interface driver smsc75xx
[ 3.130939] usbcore: registered new interface driver net1080
[ 3.136810] usbcore: registered new interface driver plusb
[ 3.142587] usbcore: registered new interface driver cdc_subset
[ 3.147810] usbcore: registered new interface driver zaurus
[ 3.154140] usbcore: registered new interface driver cdc_ncm
[ 3.158820] __platform_driver_register 586
[ 3.179203] __platform_driver_register 586
[ 3.185143] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 3.185454] ehci-pci: EHCI PCI platform driver
[ 3.191364] ehci-platform: EHCI generic platform driver
[ 3.195144] __platform_driver_register 586
[ 3.201774] ehci-msm: Qualcomm On-Chip EHCI Host Controller
[ 3.204436] __platform_driver_register 586
[ 3.212663] msm_hsusb_host 78d9000.ehci: unable to find transceiver
[ 3.215095] ohci_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver
[ 3.220345] ohci-pci: OHCI PCI platform driver
[ 3.227074] ohci-platform: OHCI generic platform driver
[ 3.230873] __platform_driver_register 586
[ 3.238185] usbcore: registered new interface driver cdc_acm
[ 3.240194] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 3.246685] usbcore: registered new interface driver usblp
[ 3.254068] usbcore: registered new interface driver cdc_wdm
[ 3.259660] usbcore: registered new interface driver uas
[ 3.265733] usbcore: registered new interface driver usb-storage
[ 3.271857] usbcore: registered new interface driver usbserial
[ 3.276680] usbcore: registered new interface driver usbserial_generic
[ 3.282398] usbserial: USB Serial support registered for generic
[ 3.288954] __platform_driver_register 586
[ 3.308125] usb3503 usb2513: switched to HUB mode
[ 3.308238] usb3503 usb2513: usb3503_probe: probed in hub mode
[ 3.312605] __platform_driver_register 586
[ 3.318444] __platform_driver_register 586
[ 3.322692] __platform_driver_register 586
[ 3.327984] __platform_driver_register 586
[ 3.330503] __platform_driver_register 586
[ 3.334856] __platform_driver_register 586
[ 3.338752] usbip_core: USB/IP Core v1.0.0
[ 3.342828] usbcore: registered new device driver usbip-host
[ 3.346284] usbip_host: USB/IP Host Driver v1.0.0
[ 3.357181] mousedev: PS/2 mouse device common for all mice
[ 3.361160] __platform_driver_register 586
[ 3.369584] input: pm8941_pwrkey as /devices/platform/soc/200f000.spmi/spmi-0/0-00/200f000.spmi:pm8916@0:pwrkey@800/input/input0
[ 3.373376] __platform_driver_register 586
[ 3.382025] __platform_driver_register 586
[ 3.389524] rtc-pm8xxx 200f000.spmi:pm8916@0:rtc@6000: rtc core: registered pm8xxx_rtc as rtc0
[ 3.391010] __platform_driver_register 586
[ 3.398217] i2c /dev entries driver
[ 3.401714] __platform_driver_register 586
[ 3.405327] __platform_driver_register 586
[ 3.409409] __platform_driver_register 586
[ 3.415689] i2c_qup 78b6000.i2c:
[ 3.415689] tx channel not available
[ 3.427217] i2c_qup 78b8000.i2c:
[ 3.427217] tx channel not available
[ 3.435614] pca953x 3-0020: failed reading register
[ 3.435831] pca953x: probe of 3-0020 failed with error -5
[ 3.441055] i2c_qup 78ba000.i2c:
[ 3.441055] tx channel not available
[ 3.462841] ov5645 1-0078: ov5645_s_power: on = 1
[ 3.463044] ov5645 1-0078: could not power up OV5645
[ 3.468611] __platform_driver_register 586
[ 3.474280] qcom-camss 1b0ac00.camss: notifier->num_subdevs = 1
[ 3.475964] qcom-camss 1b0ac00.camss: msm_csiphy_subdev_init: Enter
[ 3.483154] qcom-camss 1b0ac00.camss: msm_csiphy_subdev_init: Exit
[ 3.487735] qcom-camss 1b0ac00.camss: msm_csiphy_subdev_init: Enter
[ 3.495937] qcom-camss 1b0ac00.camss: msm_csiphy_subdev_init: Exit
[ 3.513522] qcom-camss 1b0ac00.camss: Cannot find iommu nonsecure ctx
[ 3.513620] qcom-camss 1b0ac00.camss: Fail to init vfe sub-device
[ 3.523176] __platform_driver_register 586
[ 3.531592] msm_cci_init_gpio_params:1371 gpio count 0
[ 3.533744] __platform_driver_register 586
[ 3.540962] __platform_driver_register 586
[ 3.546738] l3: supplied by s3
[ 3.551024] CPR closed loop is enabled
[ 3.554379] CPR is enabled!
[ 3.560314] __platform_driver_register 586
[ 3.563645] __platform_driver_register 586
[ 3.565473] __platform_driver_register 586
[ 3.568734] __platform_driver_register 586
[ 3.572448] __platform_driver_register 586
[ 3.579173] qcom-tsens 4a8000.thermal-sensor: tsens calibration failed
[ 3.581076] Bluetooth: HCI UART driver ver 2.3
[ 3.586356] Bluetooth: HCI UART protocol H4 registered
[ 3.590717] Bluetooth: HCI UART protocol BCSP registered
[ 3.595821] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 3.602453] usbcore: registered new interface driver btusb
[ 3.607347] __platform_driver_register 586
[ 3.614266] __platform_driver_register 586
[ 3.622029] cpu: dev_pm_opp_of_cpumask_add_table: couldn’t find opp table for cpu:0, -19
[ 3.635406] __platform_driver_register 586
[ 3.637539] __platform_driver_register 586
[ 3.640942] sdhci: Secure Digital Host Controller Interface driver
[ 3.642569] sdhci: Copyright(c) Pierre Ossman
[ 3.649173] Synopsys Designware Multimedia Card Interface Driver
[ 3.653195] __platform_driver_register 586
[ 3.660507] __platform_driver_register 586
[ 3.664100] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.667267] __platform_driver_register 586
[ 3.673650] __platform_driver_register 586
[ 3.700593] l5: supplied by s4
[ 3.746872] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using ADMA 64-bit
[ 3.752127] sdhci_msm 7864900.sdhci: Got CD GPIO
[ 3.820056] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using ADMA 64-bit
[ 3.823694] __platform_driver_register 586
[ 3.835267] mmc0: MAN_BKOPS_EN bit is not set
[ 3.853716] __platform_driver_register 586
[ 3.855308] mmc0: new HS200 MMC card at address 0001
[ 3.860990] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.862195] __platform_driver_register 586
[ 3.865875] mmcblk0: mmc0:0001 H8G1e 7.28 GiB
[ 3.868966] mmcblk0boot0: mmc0:0001 H8G1e partition 1 4.00 MiB
[ 3.871141] mmcblk0boot1: mmc0:0001 H8G1e partition 2 4.00 MiB
[ 3.873549] mmcblk0rpmb: mmc0:0001 H8G1e partition 3 4.00 MiB
[ 3.891685] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10
[ 3.930241] usbcore: registered new interface driver usbhid
[ 3.931618] usbhid: USB HID core driver
[ 3.936617] __platform_driver_register 586
[ 3.984868] 4080000.hexagon supply cx not found, using dummy regulator
[ 3.989412] 4080000.hexagon supply mss not found, using dummy regulator
[ 3.992468] l7: supplied by s4
[ 4.005362] remoteproc0: 4080000.hexagon is available
[ 4.005482] remoteproc0: Note: remoteproc is still under development and considered experimental.
[ 4.009579] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn’t yet guaranteed.
[ 4.020643] remoteproc0: Direct firmware load for mba.mbn failed with error -2
[ 4.031917] __platform_driver_register 586
[ 4.040586] qcom-tz-pil soc:vidc_tzpil@0: no crash reason id
[ 4.043187] soc:vidc_tzpil@0 supply qcom,pll not found, using dummy regulator
[ 4.046413] qcom-tz-pil soc:vidc_tzpil@0: failed to read qcom,pll_uV, skipping
[ 4.053050] qcom-tz-pil soc:vidc_tzpil@0: failed to read qcom,pll_uA, skipping
[ 4.060204] qcom-tz-pil soc:vidc_tzpil@0: no wdog IRQ defined
[ 4.067320] qcom-tz-pil soc:vidc_tzpil@0: no fatal IRQ defined
[ 4.073333] qcom-tz-pil soc:vidc_tzpil@0: no ready IRQ defined
[ 4.078871] qcom-tz-pil soc:vidc_tzpil@0: no handover IRQ defined
[ 4.084691] qcom-tz-pil soc:vidc_tzpil@0: no stop-ack IRQ defined
[ 4.091274] qcom-tz-pil soc:vidc_tzpil@0: Found relocation area 8388608@0x000000008f800000
[ 4.097704] remoteproc1: soc:vidc_tzpil@0 is available
[ 4.105086] remoteproc1: Note: remoteproc is still under development and considered experimental.
[ 4.110253] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn’t yet guaranteed.
[ 4.120133] remoteproc1: Direct firmware load for venus.mdt failed with error -2
[ 4.129769] remoteproc1: failed to load soc:vidc_tzpil@0
[ 4.131446] __platform_driver_register 586
[ 4.142996] a204000.wcnss supply vddcx not found, using dummy regulator
[ 4.157701] remoteproc2: a204000.wcnss is available
[ 4.157795] remoteproc2: Note: remoteproc is still under development and considered experimental.
[ 4.161867] remoteproc2: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn’t yet guaranteed.
[ 4.171447] remoteproc2: Direct firmware load for wcnss.mdt failed with error -2
[ 4.190884] __platform_driver_register 586
[ 4.203674] __platform_driver_register 586
[ 4.226148] coresight-tmc 825000.etf: TMC initialized
[ 4.278487] coresight-tmc 826000.etr: TMC initialized
[ 4.286483] coresight-tpiu 820000.tpiu: TPIU initialized
[ 4.293970] coresight-funnel 821000.funnel: FUNNEL initialized
[ 4.298820] coresight-funnel 841000.funnel: FUNNEL initialized
[ 4.299619] __platform_driver_register 586
[ 4.316797] coresight-etm4x 85c000.etm: ETM 4.0 initialized
[ 4.324202] coresight-etm4x 85d000.etm: ETM 4.0 initialized
[ 4.331132] coresight-etm4x 85e000.etm: ETM 4.0 initialized
[ 4.338022] coresight-etm4x 85f000.etm: ETM 4.0 initialized
[ 4.344222] coresight-replicator-qcom 824000.replicator: REPLICATOR 1.0 initialized
[ 4.345283] __platform_driver_register 586
[ 4.363536] usbcore: registered new interface driver snd-usb-audio
[ 4.368137] __platform_driver_register 586
[ 4.371577] __platform_driver_register 586
[ 4.374097] __platform_driver_register 586
[ 4.387633] __platform_driver_register 586
[ 4.389025] __platform_driver_register 586
[ 4.399615] apq8016-lpass-cpu 7708000.lpass-cpu: asoc_qcom_lpass_cpu_platform_probe() error getting mi2s-osr-clk: -2
[ 4.399911] apq8016-lpass-cpu 7708000.lpass-cpu: asoc_qcom_lpass_cpu_platform_probe() error getting mi2s-osr-clk: -2
[ 4.409527] apq8016-lpass-cpu 7708000.lpass-cpu: asoc_qcom_lpass_cpu_platform_probe() error getting mi2s-osr-clk: -2
[ 4.419979] apq8016-lpass-cpu 7708000.lpass-cpu: asoc_qcom_lpass_cpu_platform_probe() error getting mi2s-osr-clk: -2
[ 4.433790] __platform_driver_register 586
[ 4.446059] qcom-apq8016-sbc 7702000.sound: error getting codec phandle
[ 4.446186] qcom-apq8016-sbc 7702000.sound: Error resolving dai links: -22
[ 4.452057] qcom-apq8016-sbc: probe of 7702000.sound failed with error -22
[ 4.474044] NET: Registered protocol family 10
[ 4.487512] sit: IPv6 over IPv4 tunneling driver
[ 4.496667] NET: Registered protocol family 17
[ 4.498138] Bluetooth: RFCOMM TTY layer initialized
[ 4.500245] Bluetooth: RFCOMM socket layer initialized
[ 4.505116] Bluetooth: RFCOMM ver 1.11
[ 4.510952] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 4.513925] Bluetooth: HIDP socket layer initialized
[ 4.520843] 9pnet: Installing 9P2000 support
[ 4.526481] Key type dns_resolver registered
[ 4.529641] NET: Registered protocol family 42
[ 4.544107] registered taskstats version 1
[ 4.555884] msm_iommu 1f00000.qcom,iommu: invalid resource
[ 4.559556] msm_iommu 1f00000.qcom,iommu: iface: 100000000, core: 800000000
[ 4.560523] msm_iommu 1f00000.qcom,iommu: device gfx_iommu (model: 500) mapped at ffffff8000b20000, with 2 ctx banks
[ 4.567833] msm_iommu 1f00000.qcom,iommu: iommu sec: pgtable size: 94208
[ 4.587992] genirq: Setting trigger mode 1 for irq 159 failed (gic_set_type+0x0/0x5c)
[ 4.588471] msm_iommu 1f00000.qcom,iommu: Request Global CFG IRQ 159 failed with ret=-22
[ 4.602874] msm_iommu_ctx 1f09000.qcom,iommu-ctx: context gfx3d_user using bank 1
[ 4.608410] msm_iommu_ctx 1f0a000.qcom,iommu-ctx: context gfx3d_priv using bank 2
[ 4.613339] msm_iommu 1e00000.qcom,iommu: iface: 100000000, core: 800000000
[ 4.618583] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at ffffff8006400000, with 20 ctx banks
[ 4.625589] genirq: Setting trigger mode 1 for irq 159 failed (gic_set_type+0x0/0x5c)
[ 4.635680] msm_iommu 1e00000.qcom,iommu: Request Global CFG IRQ 159 failed with ret=-22
[ 4.647810] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context jpeg_enc0 using bank 2
[ 4.654881] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context vfe using bank 3
[ 4.661635] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context mdp_0 using bank 4
[ 4.668001] msm_iommu_ctx 1e25000.venus_ns: context venus_ns using bank 5
[ 4.675396] msm_iommu_ctx 1e26000.qcom,iommu-ctx: context cpp using bank 6
[ 4.681554] msm_iommu_ctx 1e27000.qcom,iommu-ctx: context mDSP using bank 7
[ 4.688261] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context gss using bank 8
[ 4.695422] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context a2 using bank 9
[ 4.702382] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context mdp_1 using bank 18
[ 4.709595] msm_iommu_ctx 1e33000.venus_sec_pixel: context venus_sec_pixel using bank 19
[ 4.716487] msm_iommu_ctx 1e34000.venus_sec_bitstream: context venus_sec_bitstream using bank 20
[ 4.725746] msm_iommu_ctx 1e35000.venus_sec_non_pixel: context venus_sec_non_pixel using bank 21
[ 4.733390] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_fw using bank 22
[ 4.741929] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context periph_rpm using bank 23
[ 4.749323] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context periph_CE using bank 24
[ 4.757557] msm_iommu_ctx 1e39000.qcom,iommu-ctx: context periph_BLSP using bank 25
[ 4.764334] msm_iommu_ctx 1e3a000.qcom,iommu-ctx: context periph_SDC1 using bank 26
[ 4.771797] msm_iommu_ctx 1e3b000.qcom,iommu-ctx: context periph_SDC2 using bank 27
[ 4.779185] msm_iommu_ctx 1e3c000.qcom,iommu-ctx: context periph_audio using bank 28
[ 4.787451] msm_iommu_ctx 1e3d000.qcom,iommu-ctx: context periph_USB_HS1 using bank 29
[ 4.794176] gpio_backlight_probe 96
[ 4.800959] gpio_backlight_probe_dt 81
[ 4.803865] gpio_backlight_probe 120
[ 4.815439] msm_pdev_probe 1123
[ 4.833478] 1a98000.qcom,mdss_dsi supply gdsc not found, using dummy regulator
[ 4.835253] 1a98000.qcom,mdss_dsi supply gdsc not found, using dummy regulator
[ 4.848764] panel_simple_dsi_probe 1512 truely,ssd8020m
[ 4.849930] panel_simple_probe 335
[ 4.856031] msm_dsi_manager_register: failed to register mipi dsi host for DSI 0
[ 4.859212] msm 1a00000.qcom,mdss_mdp: failed to bind 1a98000.qcom,mdss_dsi (ops dsi_ops): -517
[ 4.870238] msm 1a00000.qcom,mdss_mdp: master bind failed: -517
[ 4.886488] msm_otg 78d9000.phy: OTG regs = ffffff8000632000
[ 4.889729] msm_otg 78d9000.phy: no vddcx
[ 5.011269] ov5645 1-0078: ov5645_s_power: on = 1
[ 5.011322] 1b0c000.qcom,cci supply qcom,gdscr-vdd not found, using dummy regulator
[ 5.015257] msm_cci_init:1016: hw_version = 0x10000008
[ 5.022438] ov5645 1-0078: ov5645_set_power_on: Enter
[ 5.067066] msm_cci_irq:1279 MASTER_0 error 0x8000000
[ 5.067108] ov5645 1-0078: ov5645_write_reg: write reg error -22: reg=3103, val=11
[ 5.071096] ov5645 1-0078: could not set init registers
[ 5.078556] ov5645 1-0078: ov5645_set_power_off: Enter
[ 5.083686] ov5645 1-0078: could not power up OV5645
[ 5.088993] ov5645: probe of 1-0078 failed with error -22
[ 5.094327] qcom-camss 1b0ac00.camss: notifier->num_subdevs = 1
[ 5.099341] qcom-camss 1b0ac00.camss: msm_csiphy_subdev_init: Enter
[ 5.105563] qcom-camss 1b0ac00.camss: msm_csiphy_subdev_init: Exit
[ 5.111358] qcom-camss 1b0ac00.camss: msm_csiphy_subdev_init: Enter
[ 5.117969] qcom-camss 1b0ac00.camss: msm_csiphy_subdev_init: Exit
[ 5.140684] msm_pdev_probe 1123
[ 5.142691] 1a98000.qcom,mdss_dsi supply gdsc not found, using dummy regulator
[ 5.142866] 1a98000.qcom,mdss_dsi supply gdsc not found, using dummy regulator
[ 5.150670] msm_otg 78d9000.phy: Avail curr from USB = 100
[ 5.157397] msm_dsi_manager_register: failed to register mipi dsi host for DSI 0
[ 5.162837] msm 1a00000.qcom,mdss_mdp: failed to bind 1a98000.qcom,mdss_dsi (ops dsi_ops): -517
[ 5.170975] msm 1a00000.qcom,mdss_mdp: master bind failed: -517
[ 5.178875] __platform_driver_register 586
[ 5.185251] input: gpio_keys as /devices/platform/gpio_keys/input/input1
[ 5.189116] rtc-pm8xxx 200f000.spmi:pm8916@0:rtc@6000: setting system clock to 1970-01-01 04:05:38 UTC (14738)
[ 5.192124] msm_pdev_probe 1123
[ 5.194141] 1a98000.qcom,mdss_dsi supply gdsc not found, using dummy regulator
[ 5.194277] 1a98000.qcom,mdss_dsi supply gdsc not found, using dummy regulator
[ 5.195136] msm_dsi_manager_register: failed to register mipi dsi host for DSI 0
[ 5.195341] msm 1a00000.qcom,mdss_mdp: failed to bind 1a98000.qcom,mdss_dsi (ops dsi_ops): -517
[ 5.196106] msm 1a00000.qcom,mdss_mdp: master bind failed: -517

Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.0-00261
S - IMAGE_VARIANT_STRING=HAAAANAAA
S - OEM_IMAGE_VERSION_STRING=C-BPATTH
S - Boot Config, 0x000002e1
S - Core 0 Frequency, 0 MHz
B - 1544 - PBL, Start
B - 3488 - bootable_media_detect_entry, Start
B - 45732 - bootable_media_detect_success, Start
B - 45736 - elf_loader_entry, Start
B - 46952 - auth_hash_seg_entry, Start
B - 47161 - auth_hash_seg_exit, Start
B - 61295 - elf_segs_hash_verify_entry, Start
B - 120171 - PBL, End
B - 126758 - SBL1, Start
B - 189679 - pm_device_init, Start
D - 14762 - pm_device_init, Delta
B - 205021 - boot_flash_init, Start
D - 0 - boot_flash_init, Delta
B - 209047 - boot_config_data_table_init, Start
D - 21899 - boot_config_data_table_init, Delta - (0 Bytes)
B - 235490 - CDT version:3,Platform ID:24,Major ID:1,Minor ID:0,Subtype:0
B - 241712 - sbl1_ddr_set_params, Start
B - 245403 - cpr_init, Start
D - 0 - cpr_init, Delta
B - 251015 - Pre_DDR_clock_init, Start
D - 183 - Pre_DDR_clock_init, Delta
D - 0 - sbl1_ddr_set_params, Delta
B - 263489 - pm_driver_init, Start
D - 6832 - pm_driver_init, Delta
B - 278983 - clock_init, Start
D - 61 - clock_init, Delta
B - 310642 - Image Load, Start
D - 22265 - QSEE Image Loaded, Delta - (460664 Bytes)
B - 332907 - Image Load, Start
D - 305 - SEC Image Loaded, Delta - (2048 Bytes)
B - 340136 - sbl1_efs_handle_cookies, Start
D - 61 - sbl1_efs_handle_cookies, Delta
B - 347913 - Image Load, Start
D - 10797 - QHEE Image Loaded, Delta - (51952 Bytes)
B - 358741 - Image Load, Start
D - 11986 - RPM Image Loaded, Delta - (149492 Bytes)
B - 370758 - Image Load, Start
D - 11803 - APPSBL Image Loaded, Delta - (488840 Bytes)
B - 382592 - QSEE Execution, Start
D - 61 - QSEE Execution, Delta
B - 388265 - SBL1, End
D - 263886 - SBL1, Delta
S - Flash Throughput, 116000 KB/s (1152996 Bytes, 9882 us)
S - DDR Frequency, 400 MHz
Android Bootloader - UART_DM Initialized!!!
[0] welcome to lk

[10] platform_init()
[10] target_init()
[40] SDHC Running in HS200 mode
[50] Done initialization of the card
[60] pm8x41_get_is_cold_boot: Warm boot
[60] No ‘frp’ partition found
[60] Not able to search the panel:
[60] Display not enabled for 24 HW type
[70] Target panel init not found!
[70] pm8x41_get_is_cold_boot: Warm boot
[70] partition misc doesn’t exist
[80] error in emmc_recovery_init
[80] Unable to locate /bootselect partition
[80] No ‘misc’ partition found
[90] Error reading MISC partition
[90] failed to get ffbm cookie[100] use_signed_kernel=0, is_unlocked=0, is_tampered=0.
[100] Loading boot image (17379328): start
[210] Loading boot image (17379328): done
[340] DTB Total entry: 15, DTB version: 2
[340] Using DTB entry 0x000000f7/00000000/0x00010018/0 for device 0x000000f7/00010000/0x00010018/0
[350] Using pmic info 0x2000b/0x0/0x0/0x0 for device 0x2000b/0x0/0x0/0x0
[360] target_display_panel_node:510: hw_id=24 panel_name=""
[360] cmdline: root=/dev/disk/by-partlabel/rootfs rw rootwait console=ttyMSM0,115200n8 androidboot.emmc=true androidboot.serialno=ac87b5c androidboot.baseband=apq mdss_mdp.panel=0:dsi:0:
[380] Updating device tree: start
[520] Setting mac address in DT: 2:0:a:c8:7b:5c
[530] Updating device tree: done
[530] booting linux @ 0x80080000, ramdisk @ 0x82000000 (3483799), tags/device tree @ 0x81e00000
[540] Jumping to kernel via monitor
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.9-linaro-lt-qcom (einfochips@AHMCPU1923) (gcc version 4.9.3 20141031 (prerelease) (Linaro GCC 2014.11) ) #18 SMP PREEMPT Mon Jul 18 14:23:07 IST 2016
[ 0.000000] Boot CPU: AArch64 Processor [410fd030]
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: OVERLAP DETECTED!
[ 0.000000] hypervisor_region@86400000 (0x0000000086400000–0x0000000086800000) overlaps with rmtfs@86700000 (0x0000000086700000–0x00000000867e0000)
[ 0.000000] Reserved memory: OVERLAP DETECTED!
[ 0.000000] modem_adsp_region@86800000 (0x0000000086800000–0x000000008b000000) overlaps with wcnss@89300000 (0x0000000089300000–0x0000000089900000)
[ 0.000000] cma: Reserved 64 MiB at 0x00000000bc000000
[ 0.000000] PERCPU: Embedded 16 pages/cpu @ffffffc03bf3a000 s24960 r8192 d32384 u65536
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM errata 826319, 827319, 824069
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 234108
[ 0.000000] Kernel command line: root=/dev/disk/by-partlabel/rootfs rw rootwait console=ttyMSM0,115200n8 androidboot.emmc=true androidboot.serialno=ac87b5c androidboot.baseband=apq mdss_mdp.panel=0:dsi:0:
[ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 12288 bytes
[ 0.000000] log_buf_len min size: 16384 bytes
[ 0.000000] log_buf_len: 32768 bytes
[ 0.000000] early log buf free: 14348(87%)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] software IO TLB [mem 0xb6c00000-0xbac00000] (64MB) mapped at [ffffffc036c00000-ffffffc03abfffff]
[ 0.000000] Memory: 783824K/951296K available (8260K kernel code, 771K rwdata, 3724K rodata, 572K init, 270K bss, 101936K reserved, 65536K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)
[ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
[ 0.000000] 0xffffffbdc0000000 - 0xffffffbdc1000000 ( 16 MB actual)
[ 0.000000] fixed : 0xffffffbffa7fd000 - 0xffffffbffac00000 ( 4108 KB)
[ 0.000000] PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 MB)
[ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc040000000 ( 1024 MB)
[ 0.000000] .init : 0xffffffc000c37000 - 0xffffffc000cc6000 ( 572 KB)
[ 0.000000] .text : 0xffffffc000080000 - 0xffffffc000c363e4 ( 11993 KB)
[ 0.000000] .data : 0xffffffc000cdc000 - 0xffffffc000d9cc00 ( 771 KB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000004] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000461] Console: colour dummy device 80x25
[ 0.000481] Calibrating delay loop (skipped), value calculated using timer frequency… 38.40 BogoMIPS (lpj=76800)
[ 0.000491] pid_max: default: 32768 minimum: 301
[ 0.000563] Security Framework initialized
[ 0.000611] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.000620] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.001184] Initializing cgroup subsys io
[ 0.001202] Initializing cgroup subsys memory
[ 0.001224] Initializing cgroup subsys devices
[ 0.001235] Initializing cgroup subsys hugetlb
[ 0.001556] EFI services will not be available.
[ 0.001578] ASID allocator initialised with 65536 entries
[ 0.040140] Detected VIPT I-cache on CPU1
[ 0.040180] CPU1: Booted secondary processor [410fd030]
[ 0.052120] Detected VIPT I-cache on CPU2
[ 0.052149] CPU2: Booted secondary processor [410fd030]
[ 0.064137] Detected VIPT I-cache on CPU3
[ 0.064166] CPU3: Booted secondary processor [410fd030]
[ 0.064220] Brought up 4 CPUs
[ 0.064246] SMP: Total of 4 processors activated.
[ 0.064255] CPU: All CPU(s) started at EL1
[ 0.064278] alternatives: patching kernel code
[ 0.064877] devtmpfs: initialized
[ 0.083486] DMI not present or invalid.
[ 0.083786] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.086126] pinctrl core: initialized pinctrl subsystem
[ 0.086494] __platform_driver_register 586
[ 0.086777] __platform_driver_register 586
[ 0.087321] __platform_driver_register 586
[ 0.087406] __platform_driver_register 586
[ 0.087450] __platform_driver_register 586
[ 0.087498] __platform_driver_register 586
[ 0.087541] __platform_driver_register 586
[ 0.087902] NET: Registered protocol family 16
[ 0.088642] __platform_driver_register 586
[ 0.088695] __platform_driver_register 586
[ 0.088774] __platform_driver_register 586
[ 0.089009] __platform_driver_register 586
[ 0.089298] mipi_dsi_bus_init 1027
[ 0.089305] mipi_dsi_driver_register_full 1002
[ 0.089372] __platform_driver_register 586
[ 0.104064] cpuidle: using governor ladder
[ 0.116080] cpuidle: using governor menu
[ 0.116096] __platform_driver_register 586
[ 0.116387] vdso: 2 pages (1 code @ ffffffc000ce1000, 1 data @ ffffffc000ce0000)
[ 0.116419] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.117271] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.117285] __platform_driver_register 586
[ 0.117435] __platform_driver_register 586
[ 0.117472] Serial: AMBA PL011 UART driver
[ 0.117479] __platform_driver_register 586
[ 0.117561] __platform_driver_register 586
[ 0.117609] __platform_driver_register 586
[ 0.132396] irq: no irq domain found for /hexagon-smp2p/slave-kernel !
[ 0.133244] irq: no irq domain found for /wcnss-smp2p/slave-kernel !
[ 0.136813] irq: no irq domain found for /soc/qcom,mdss_mdp@1a00000 !
[ 0.169357] __platform_driver_register 586
[ 0.169610] msm_bus_fabric_init_driver
[ 0.169619] __platform_driver_register 586
[ 0.169804] msm_bus_device 580000.ad-hoc-bus: Dev 1024
[ 0.169822] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
[ 0.169831] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
[ 0.170110] msm_bus_device 580000.ad-hoc-bus: Dev 0
[ 0.170125] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
[ 0.170134] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
[ 0.170291] msm_bus_device 580000.ad-hoc-bus: Dev 4096
[ 0.170306] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
[ 0.170315] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
[ 0.176893] msm_bus_init_clk: Valid node clk node 1024 ctx 0
[ 0.176901] msm_bus_init_clk: Valid node clk node 1024 ctx 1msm_bus_init_clk: Valid node clk node 0 ctx 0
[ 0.176990] msm_bus_init_clk: Valid node clk node 0 ctx 1msm_bus_init_clk: Valid node clk node 4096 ctx 0
[ 0.177085] msm_bus_init_clk: Valid node clk node 4096 ctx 1__platform_driver_register 586
[ 0.216004] __platform_driver_register 586
[ 0.234084] __platform_driver_register 586
[ 0.236155] __platform_driver_register 586
[ 0.306995] __platform_driver_register 586
[ 0.312523] __platform_driver_register 586
[ 0.319472] vgaarb: loaded
[ 0.325663] SCSI subsystem initialized
[ 0.367088] usbcore: registered new interface driver usbfs
[ 0.368671] usbcore: registered new interface driver hub
[ 0.370730] usbcore: registered new device driver usb
[ 0.375320] media: Linux media interface: v0.10
[ 0.376754] Linux video capture interface: v2.00
[ 0.382619] dmi: Firmware registration failed.
[ 0.386521] Advanced Linux Sound Architecture Driver Initialized.
[ 0.401670] Bluetooth: Core ver 2.21
[ 0.402418] NET: Registered protocol family 31
[ 0.402462] Bluetooth: HCI device and connection manager initialized
[ 0.402915] Bluetooth: HCI socket layer initialized
[ 0.403130] Bluetooth: L2CAP socket layer initialized
[ 0.403573] Bluetooth: SCO socket layer initialized
[ 0.425500] clocksource: Switched to clocksource arch_sys_counter
[ 0.598267] NET: Registered protocol family 2
[ 0.611809] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.613725] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.621900] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.628315] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.628765] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.635737] NET: Registered protocol family 1
[ 0.644047] RPC: Registered named UNIX socket transport module.
[ 0.644124] RPC: Registered udp transport module.
[ 0.644146] RPC: Registered tcp transport module.
[ 0.644158] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.649810] Unpacking initramfs…
[ 1.546095] Freeing initrd memory: 3400K (ffffffc002000000 - ffffffc002352000)
[ 1.548657] __platform_driver_register 586
[ 1.556633] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 1.563002] kvm [1]: HYP mode not available
[ 1.585670] __platform_driver_register 586
[ 1.604267] futex hash table entries: 1024 (order: 5, 131072 bytes)
[ 1.609657] audit: initializing netlink subsys (disabled)
[ 1.610656] audit: type=2000 audit(1.599:1): initialized
[ 1.623836] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.830201] VFS: Disk quotas dquot_6.6.0
[ 1.834355] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.892829] NFS: Registering the id_resolver key type
[ 1.893869] Key type id_resolver registered
[ 1.893904] Key type id_legacy registered
[ 1.898441] fuse init (API version 7.23)
[ 1.910339] 9p: Installing v9fs 9p2000 file system support
[ 1.934673] io scheduler noop registered
[ 1.939478] io scheduler cfq registered (default)
[ 1.940887] __platform_driver_register 586
[ 1.946689] __platform_driver_register 586
[ 1.948641] __platform_driver_register 586
[ 1.950155] __platform_driver_register 586
[ 1.951480] __platform_driver_register 586
[ 1.952674] __platform_driver_register 586
[ 1.953981] __platform_driver_register 586
[ 1.955023] __platform_driver_register 586
[ 1.955982] __platform_driver_register 586
[ 1.958300] __platform_driver_register 586
[ 1.964994] __platform_driver_register 586
[ 1.966933] __platform_driver_register 586
[ 1.968171] __platform_driver_register 586
[ 1.969679] __platform_driver_register 586
[ 1.971509] gpio_backlight_probe 96
[ 1.976967] __platform_driver_register 586
[ 2.016120] __platform_driver_register 586
[ 2.018349] __platform_driver_register 586
[ 2.020687] __platform_driver_register 586
[ 2.022105] __platform_driver_register 586
[ 2.034584] __platform_driver_register 586
[ 2.043507] __platform_driver_register 586
[ 2.046111] __platform_driver_register 586
[ 2.047195] __platform_driver_register 586
[ 2.048221] __platform_driver_register 586
[ 2.052056] __platform_driver_register 586
[ 2.053354] __platform_driver_register 586
[ 2.118011] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 2.137007] __platform_driver_register 586
[ 2.143376] __platform_driver_register 586
[ 2.146772] __platform_driver_register 586
[ 2.148292] __platform_driver_register 586
[ 2.150379] __platform_driver_register 586
[ 2.154089] msm_serial 78af000.serial: msm_serial: detected port #1
[ 2.158115] msm_serial 78af000.serial: uartclk = 3686400
[ 2.159412] 78af000.serial: ttyMSM1 at MMIO 0x78af000 (irq = 137, base_baud = 230400) is a MSM
[ 2.166524] msm_serial 78b0000.serial: msm_serial: detected port #0
[ 2.167442] msm_serial 78b0000.serial: uartclk = 3686400
[ 2.167966] 78b0000.serial: ttyMSM0 at MMIO 0x78b0000 (irq = 138, base_baud = 230400) is a MSM
[ 2.168123] msm_serial: console setup on port #0
[ 3.312308] console [ttyMSM0] enabled
[ 3.323335] msm_serial: driver initialized
[ 3.323765] __platform_driver_register 586
[ 3.329430] __platform_driver_register 586
[ 3.335926] [drm] Initialized drm 1.1.0 20060810
[ 3.336163] __platform_driver_register 586
[ 3.342732] dsi_phy_driver_probe 290
[ 3.348557] l6: supplied by s4
[ 3.355799] dsi_phy_driver_probe 359
[ 3.357284] __platform_driver_register 586
[ 3.360976] __platform_driver_register 586
[ 3.363720] __platform_driver_register 586
[ 3.367782] __platform_driver_register 586
[ 3.373639] __platform_driver_register 586
[ 3.378054] msm_pdev_probe 1123
[ 3.400892] 1a98000.qcom,mdss_dsi supply gdsc not found, using dummy regulator
[ 3.402762] 1a98000.qcom,mdss_dsi supply gdsc not found, using dummy regulator
[ 3.409616] l2: supplied by s3
[ 3.420014] msm_dsi_manager_register: failed to register mipi dsi host for DSI 0
[ 3.423716] msm 1a00000.qcom,mdss_mdp: failed to bind 1a98000.qcom,mdss_dsi (ops dsi_ops): -517
[ 3.433831] msm 1a00000.qcom,mdss_mdp: master bind failed: -517
[ 3.438888] __platform_driver_register 586
[ 3.444985] mipi_dsi_driver_register_full 1002
[ 3.610364] loop: module loaded
[ 3.619346] __platform_driver_register 586
[ 3.625423] __platform_driver_register 586
[ 3.627362] __platform_driver_register 586
[ 3.629747] __platform_driver_register 586
[ 3.633496] __platform_driver_register 586
[ 3.637748] __platform_driver_register 586
[ 3.659014] spi_qup 78b7000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[ 3.676801] spi_qup 78b9000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[ 3.686678] __platform_driver_register 586
[ 3.690679] spmi spmi-0: PMIC Arb Version-2 (0x20010000)
[ 3.829815] tun: Universal TUN/TAP device driver, 1.6
[ 3.830142] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 3.838990] __platform_driver_register 586
[ 3.844072] sky2: driver version 1.30
[ 3.845801] __platform_driver_register 586
[ 3.849878] __platform_driver_register 586
[ 3.854734] usbcore: registered new interface driver asix
[ 3.857451] usbcore: registered new interface driver ax88179_178a
[ 3.862309] usbcore: registered new interface driver cdc_ether
[ 3.868349] usbcore: registered new interface driver dm9601
[ 3.874276] usbcore: registered new interface driver smsc75xx
[ 3.879515] usbcore: registered new interface driver net1080
[ 3.885606] usbcore: registered new interface driver plusb
[ 3.891135] usbcore: registered new interface driver cdc_subset
[ 3.896430] usbcore: registered new interface driver zaurus
[ 3.902880] usbcore: registered new interface driver cdc_ncm
[ 3.907164] __platform_driver_register 586
[ 3.930675] __platform_driver_register 586
[ 3.938650] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 3.938984] ehci-pci: EHCI PCI platform driver
[ 3.945251] ehci-platform: EHCI generic platform driver
[ 3.948639] __platform_driver_register 586
[ 3.955592] ehci-msm: Qualcomm On-Chip EHCI Host Controller
[ 3.957994] __platform_driver_register 586
[ 3.967094] msm_hsusb_host 78d9000.ehci: unable to find transceiver
[ 3.968859] ohci_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver
[ 3.973884] ohci-pci: OHCI PCI platform driver
[ 3.980911] ohci-platform: OHCI generic platform driver
[ 3.984384] __platform_driver_register 586
[ 3.992305] usbcore: registered new interface driver cdc_acm
[ 3.993685] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 4.000521] usbcore: registered new interface driver usblp
[ 4.007942] usbcore: registered new interface driver cdc_wdm
[ 4.013614] usbcore: registered new interface driver uas
[ 4.019528] usbcore: registered new interface driver usb-storage
[ 4.026300] usbcore: registered new interface driver usbserial
[ 4.030486] usbcore: registered new interface driver usbserial_generic
[ 4.036198] usbserial: USB Serial support registered for generic
[ 4.042811] __platform_driver_register 586
[ 4.062446] usb3503 usb2513: switched to HUB mode
[ 4.062555] usb3503 usb2513: usb3503_probe: probed in hub mode
[ 4.067169] __platform_driver_register 586
[ 4.073477] __platform_driver_register 586
[ 4.077305] __platform_driver_register 586
[ 4.082817] __platform_driver_register 586
[ 4.084996] __platform_driver_register 586
[ 4.089355] __platform_driver_register 586
[ 4.093361] usbip_core: USB/IP Core v1.0.0
[ 4.097639] usbcore: registered new device driver usbip-host
[ 4.100660] usbip_host: USB/IP Host Driver v1.0.0
[ 4.113659] mousedev: PS/2 mouse device common for all mice
[ 4.118995] __platform_driver_register 586
[ 4.129601] input: pm8941_pwrkey as /devices/platform/soc/200f000.spmi/spmi-0/0-00/200f000.spmi:pm8916@0:pwrkey@800/input/input0
[ 4.135393] __platform_driver_register 586
[ 4.142398] __platform_driver_register 586
[ 4.152037] rtc-pm8xxx 200f000.spmi:pm8916@0:rtc@6000: rtc core: registered pm8xxx_rtc as rtc0
[ 4.153851] __platform_driver_register 586
[ 4.161165] i2c /dev entries driver
[ 4.164462] __platform_driver_register 586
[ 4.168200] __platform_driver_register 586
[ 4.172182] __platform_driver_register 586
[ 4.178470] i2c_qup 78b6000.i2c:
[ 4.178470] tx channel not available
[ 4.193530] i2c_qup 78b8000.i2c:
[ 4.193530] tx channel not available
[ 4.206529] pca953x 3-0020: failed reading register
[ 4.206742] pca953x: probe of 3-0020 failed with error -5
[ 4.212388] i2c_qup 78ba000.i2c:
[ 4.212388] tx channel not available
[ 4.240559] ov5645 1-0078: ov5645_s_power: on = 1
[ 4.240766] ov5645 1-0078: could not power up OV5645
[ 4.247128] __platform_driver_register 586
[ 4.252886] qcom-camss 1b0ac00.camss: notifier->num_subdevs = 1
[ 4.253793] qcom-camss 1b0ac00.camss: msm_csiphy_subdev_init: Enter
[ 4.261458] qcom-camss 1b0ac00.camss: msm_csiphy_subdev_init: Exit
[ 4.265461] qcom-camss 1b0ac00.camss: msm_csiphy_subdev_init: Enter
[ 4.272939] qcom-camss 1b0ac00.camss: msm_csiphy_subdev_init: Exit
[ 4.292749] qcom-camss 1b0ac00.camss: Cannot find iommu nonsecure ctx
[ 4.292865] qcom-camss 1b0ac00.camss: Fail to init vfe sub-device
[ 4.303110] __platform_driver_register 586
[ 4.312790] msm_cci_init_gpio_params:1371 gpio count 0
[ 4.315670] __platform_driver_register 586
[ 4.322976] __platform_driver_register 586
[ 4.329637] l3: supplied by s3
[ 4.333742] CPR closed loop is enabled
[ 4.337880] CPR is enabled!
[ 4.344834] __platform_driver_register 586
[ 4.349448] __platform_driver_register 586
[ 4.351888] __platform_driver_register 586
[ 4.354015] __platform_driver_register 586
[ 4.357998] __platform_driver_register 586
[ 4.365147] qcom-tsens 4a8000.thermal-sensor: tsens calibration failed
[ 4.366781] Bluetooth: HCI UART driver ver 2.3
[ 4.371461] Bluetooth: HCI UART protocol H4 registered
[ 4.375857] Bluetooth: HCI UART protocol BCSP registered
[ 4.380945] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 4.388030] usbcore: registered new interface driver btusb
[ 4.392498] __platform_driver_register 586
[ 4.399787] __platform_driver_register 586
[ 4.407904] cpu: dev_pm_opp_of_cpumask_add_table: couldn’t find opp table for cpu:0, -19
[ 4.424486] __platform_driver_register 586
[ 4.427144] __platform_driver_register 586
[ 4.431756] sdhci: Secure Digital Host Controller Interface driver
[ 4.431932] sdhci: Copyright(c) Pierre Ossman
[ 4.438506] Synopsys Designware Multimedia Card Interface Driver
[ 4.442311] __platform_driver_register 586
[ 4.450088] __platform_driver_register 586
[ 4.453477] sdhci-pltfm: SDHCI platform and OF driver helper
[ 4.456313] __platform_driver_register 586
[ 4.462978] __platform_driver_register 586
[ 4.493307] l5: supplied by s4
[ 4.541296] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using ADMA 64-bit
[ 4.547950] sdhci_msm 7864900.sdhci: Got CD GPIO
[ 4.614830] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using ADMA 64-bit
[ 4.618835] __platform_driver_register 586
[ 4.629711] mmc0: MAN_BKOPS_EN bit is not set
[ 4.655396] mmc0: new HS200 MMC card at address 0001
[ 4.660167] __platform_driver_register 586
[ 4.670774] mmcblk0: mmc0:0001 H8G1e 7.28 GiB
[ 4.673806] ledtrig-cpu: registered to indicate activity on CPUs
[ 4.674675] __platform_driver_register 586
[ 4.676567] mmcblk0boot0: mmc0:0001 H8G1e partition 1 4.00 MiB
[ 4.679916] mmcblk0boot1: mmc0:0001 H8G1e partition 2 4.00 MiB
[ 4.683562] mmcblk0rpmb: mmc0:0001 H8G1e partition 3 4.00 MiB
[ 4.707572] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10
[ 4.758916] usbcore: registered new interface driver usbhid
[ 4.759881] usbhid: USB HID core driver
[ 4.768402] __platform_driver_register 586
[ 4.836744] 4080000.hexagon supply cx not found, using dummy regulator
[ 4.841769] 4080000.hexagon supply mss not found, using dummy regulator
[ 4.844419] l7: supplied by s4
[ 4.860482] remoteproc0: 4080000.hexagon is available
[ 4.860582] remoteproc0: Note: remoteproc is still under development and considered experimental.
[ 4.864682] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn’t yet guaranteed.
[ 4.874992] remoteproc0: Direct firmware load for mba.mbn failed with error -2
[ 4.887560] __platform_driver_register 586
[ 4.896468] qcom-tz-pil soc:vidc_tzpil@0: no crash reason id
[ 4.899185] soc:vidc_tzpil@0 supply qcom,pll not found, using dummy regulator
[ 4.901988] qcom-tz-pil soc:vidc_tzpil@0: failed to read qcom,pll_uV, skipping
[ 4.908370] qcom-tz-pil soc:vidc_tzpil@0: failed to read qcom,pll_uA, skipping
[ 4.915533] qcom-tz-pil soc:vidc_tzpil@0: no wdog IRQ defined
[ 4.922640] qcom-tz-pil soc:vidc_tzpil@0: no fatal IRQ defined
[ 4.928462] qcom-tz-pil soc:vidc_tzpil@0: no ready IRQ defined
[ 4.934189] qcom-tz-pil soc:vidc_tzpil@0: no handover IRQ defined
[ 4.940014] qcom-tz-pil soc:vidc_tzpil@0: no stop-ack IRQ defined
[ 4.946677] qcom-tz-pil soc:vidc_tzpil@0: Found relocation area 8388608@0x000000008f800000
[ 4.953094] remoteproc1: soc:vidc_tzpil@0 is available
[ 4.960395] remoteproc1: Note: remoteproc is still under development and considered experimental.
[ 4.965567] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn’t yet guaranteed.
[ 4.976526] remoteproc1: Direct firmware load for venus.mdt failed with error -2
[ 4.985486] remoteproc1: failed to load soc:vidc_tzpil@0
[ 4.987138] __platform_driver_register 586
[ 5.000052] a204000.wcnss supply vddcx not found, using dummy regulator
[ 5.016064] remoteproc2: a204000.wcnss is available
[ 5.016172] remoteproc2: Note: remoteproc is still under development and considered experimental.
[ 5.020274] remoteproc2: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn’t yet guaranteed.
[ 5.030024] remoteproc2: Direct firmware load for wcnss.mdt failed with error -2
[ 5.051645] __platform_driver_register 586
[ 5.066480] __platform_driver_register 586
[ 5.095554] coresight-tmc 825000.etf: TMC initialized
[ 5.191539] coresight-tmc 826000.etr: TMC initialized
[ 5.201833] coresight-tpiu 820000.tpiu: TPIU initialized
[ 5.211417] coresight-funnel 821000.funnel: FUNNEL initialized
[ 5.216854] coresight-funnel 841000.funnel: FUNNEL initialized
[ 5.217907] __platform_driver_register 586
[ 5.238326] coresight-etm4x 85c000.etm: ETM 4.0 initialized
[ 5.248498] coresight-etm4x 85d000.etm: ETM 4.0 initialized
[ 5.258482] coresight-etm4x 85e000.etm: ETM 4.0 initialized
[ 5.268421] coresight-etm4x 85f000.etm: ETM 4.0 initialized
[ 5.276484] coresight-replicator-qcom 824000.replicator: REPLICATOR 1.0 initialized
[ 5.277823] __platform_driver_register 586
[ 5.298135] usbcore: registered new interface driver snd-usb-audio
[ 5.303400] __platform_driver_register 586
[ 5.306552] __platform_driver_register 586
[ 5.308756] __platform_driver_register 586
[ 5.323035] __platform_driver_register 586
[ 5.324792] __platform_driver_register 586
[ 5.341958] apq8016-lpass-cpu 7708000.lpass-cpu: asoc_qcom_lpass_cpu_platform_probe() error getting mi2s-osr-clk: -2
[ 5.342262] apq8016-lpass-cpu 7708000.lpass-cpu: asoc_qcom_lpass_cpu_platform_probe() error getting mi2s-osr-clk: -2
[ 5.351838] apq8016-lpass-cpu 7708000.lpass-cpu: asoc_qcom_lpass_cpu_platform_probe() error getting mi2s-osr-clk: -2
[ 5.362332] apq8016-lpass-cpu 7708000.lpass-cpu: asoc_qcom_lpass_cpu_platform_probe() error getting mi2s-osr-clk: -2
[ 5.377165] __platform_driver_register 586
[ 5.389601] qcom-apq8016-sbc 7702000.sound: error getting codec phandle
[ 5.389728] qcom-apq8016-sbc 7702000.sound: Error resolving dai links: -22
[ 5.395605] qcom-apq8016-sbc: probe of 7702000.sound failed with error -22
[ 5.424680] NET: Registered protocol family 10
[ 5.443666] sit: IPv6 over IPv4 tunneling driver
[ 5.456956] NET: Registered protocol family 17
[ 5.459021] Bluetooth: RFCOMM TTY layer initialized
[ 5.460591] Bluetooth: RFCOMM socket layer initialized
[ 5.465429] Bluetooth: RFCOMM ver 1.11
[ 5.470521] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 5.474273] Bluetooth: HIDP socket layer initialized
[ 5.483500] 9pnet: Installing 9P2000 support
[ 5.487665] Key type dns_resolver registered
[ 5.490131] NET: Registered protocol family 42
[ 5.510851] registered taskstats version 1
[ 5.527092] msm_iommu 1f00000.qcom,iommu: invalid resource
[ 5.531564] msm_iommu 1f00000.qcom,iommu: iface: 100000000, core: 800000000
[ 5.531855] msm_iommu 1f00000.qcom,iommu: device gfx_iommu (model: 500) mapped at ffffff8000b20000, with 2 ctx banks
[ 5.539262] msm_iommu 1f00000.qcom,iommu: iommu sec: pgtable size: 94208
[ 5.565188] genirq: Setting trigger mode 1 for irq 159 failed (gic_set_type+0x0/0x5c)
[ 5.565598] msm_iommu 1f00000.qcom,iommu: Request Global CFG IRQ 159 failed with ret=-22
[ 5.582702] msm_iommu_ctx 1f09000.qcom,iommu-ctx: context gfx3d_user using bank 1
[ 5.590081] msm_iommu_ctx 1f0a000.qcom,iommu-ctx: context gfx3d_priv using bank 2
[ 5.593949] msm_iommu 1e00000.qcom,iommu: iface: 100000000, core: 800000000
[ 5.597450] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at ffffff8006400000, with 20 ctx banks
[ 5.604592] genirq: Setting trigger mode 1 for irq 159 failed (gic_set_type+0x0/0x5c)
[ 5.614417] msm_iommu 1e00000.qcom,iommu: Request Global CFG IRQ 159 failed with ret=-22
[ 5.628174] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context jpeg_enc0 using bank 2
[ 5.634287] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context vfe using bank 3
[ 5.641564] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context mdp_0 using bank 4
[ 5.647918] msm_iommu_ctx 1e25000.venus_ns: context venus_ns using bank 5
[ 5.654849] msm_iommu_ctx 1e26000.qcom,iommu-ctx: context cpp using bank 6
[ 5.661468] msm_iommu_ctx 1e27000.qcom,iommu-ctx: context mDSP using bank 7
[ 5.668118] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context gss using bank 8
[ 5.676214] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context a2 using bank 9
[ 5.682760] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context mdp_1 using bank 18
[ 5.689340] msm_iommu_ctx 1e33000.venus_sec_pixel: context venus_sec_pixel using bank 19
[ 5.696374] msm_iommu_ctx 1e34000.venus_sec_bitstream: context venus_sec_bitstream using bank 20
[ 5.704303] msm_iommu_ctx 1e35000.venus_sec_non_pixel: context venus_sec_non_pixel using bank 21
[ 5.713114] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_fw using bank 22
[ 5.721438] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context periph_rpm using bank 23
[ 5.728980] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context periph_CE using bank 24
[ 5.736601] msm_iommu_ctx 1e39000.qcom,iommu-ctx: context periph_BLSP using bank 25
[ 5.744321] msm_iommu_ctx 1e3a000.qcom,iommu-ctx: context periph_SDC1 using bank 26
[ 5.751551] msm_iommu_ctx 1e3b000.qcom,iommu-ctx: context periph_SDC2 using bank 27
[ 5.758903] msm_iommu_ctx 1e3c000.qcom,iommu-ctx: context periph_audio using bank 28
[ 5.766786] msm_iommu_ctx 1e3d000.qcom,iommu-ctx: context periph_USB_HS1 using bank 29
[ 5.773084] gpio_backlight_probe 96
[ 5.779761] gpio_backlight_probe_dt 81
[ 5.782693] gpio_backlight_probe 120
[ 5.795933] msm_pdev_probe 1123
[ 5.819266] 1a98000.qcom,mdss_dsi supply gdsc not found, using dummy regulator
[ 5.821443] 1a98000.qcom,mdss_dsi supply gdsc not found, using dummy regulator
[ 5.837529] panel_simple_dsi_probe 1512 truely,ssd8020m
[ 5.839989] panel_simple_probe 335
[ 5.845432] msm_dsi_manager_register: failed to register mipi dsi host for DSI 0
[ 5.848989] msm 1a00000.qcom,mdss_mdp: failed to bind 1a98000.qcom,mdss_dsi (ops dsi_ops): -517
[ 5.860813] msm 1a00000.qcom,mdss_mdp: master bind failed: -517
[ 5.882000] msm_otg 78d9000.phy: OTG regs = ffffff8000632000
[ 5.885781] msm_otg 78d9000.phy: no vddcx
[ 6.006481] ov5645 1-0078: ov5645_s_power: on = 1
[ 6.006535] 1b0c000.qcom,cci supply qcom,gdscr-vdd not found, using dummy regulator
[ 6.010472] msm_cci_init:1016: hw_version = 0x10000008
[ 6.017650] ov5645 1-0078: ov5645_set_power_on: Enter
[ 6.061461] msm_cci_irq:1279 MASTER_0 error 0x8000000
[ 6.061502] ov5645 1-0078: ov5645_write_reg: write reg error -22: reg=3103, val=11
[ 6.065492] ov5645 1-0078: could not set init registers
[ 6.072954] ov5645 1-0078: ov5645_set_power_off: Enter
[ 6.078080] ov5645 1-0078: could not power up OV5645
[ 6.083394] ov5645: probe of 1-0078 failed with error -22
[ 6.088724] qcom-camss 1b0ac00.camss: notifier->num_subdevs = 1
[ 6.093735] qcom-camss 1b0ac00.camss: msm_csiphy_subdev_init: Enter
[ 6.099672] qcom-camss 1b0ac00.camss: msm_csiphy_subdev_init: Exit
[ 6.105730] qcom-camss 1b0ac00.camss: msm_csiphy_subdev_init: Enter
[ 6.112209] qcom-camss 1b0ac00.camss: msm_csiphy_subdev_init: Exit
[ 6.130013] msm_pdev_probe 1123
[ 6.131453] 1a98000.qcom,mdss_dsi supply gdsc not found, using dummy regulator
[ 6.132051] 1a98000.qcom,mdss_dsi supply gdsc not found, using dummy regulator
[ 6.139921] msm_dsi_manager_register: failed to register mipi dsi host for DSI 0
[ 6.146499] msm_otg 78d9000.phy: Avail curr from USB = 100
[ 6.154172] msm 1a00000.qcom,mdss_mdp: failed to bind 1a98000.qcom,mdss_dsi (ops dsi_ops): -517
[ 6.159870] msm 1a00000.qcom,mdss_mdp: master bind failed: -517
[ 6.168121] __platform_driver_register 586
[ 6.174369] input: gpio_keys as /devices/platform/gpio_keys/input/input1
[ 6.178340] rtc-pm8xxx 200f000.spmi:pm8916@0:rtc@6000: setting system clock to 1970-01-01 04:05:49 UTC (14749)
[ 6.180646] msm_pdev_probe 1123
[ 6.182100] 1a98000.qcom,mdss_dsi supply gdsc not found, using dummy regulator
[ 6.182202] 1a98000.qcom,mdss_dsi supply gdsc not found, using dummy regulator
[ 6.197781] msm_dsi_manager_register: failed to register mipi dsi host for DSI 0
[ 6.197932] msm 1a00000.qcom,mdss_mdp: failed to bind 1a98000.qcom,mdss_dsi (ops dsi_ops): -517
[ 6.198486] msm 1a00000.qcom,mdss_mdp: master bind failed: -517
[ 6.234683] Unhandled fault: synchronous external abort (0x96000010) at 0xffffff80003963c0

It could be something wrong in your panel driver

[ 5.837529] panel_simple_dsi_probe 1512 truely,ssd8020m
[ 5.839989] panel_simple_probe 335

you can refer this panel driver for linux