Can Nitrogen work with 96Boards Sensors (https://www.seeedstudio.com/96Boards-Sensors-p-2617.html) ?
The 96Boards Sensors Mezzanine is designed for 96Boards Consumer edition, so not adapted to be stacked on the Nitrogen which is a 96Boards IOT edition. However since IO levels are the same, you can possibly add wires to connect Nitrogen connector to the Mezzanine LS connector (refer to schematics)… Also note that the mezzanine needs external 5V source.
@keith, I was wrong, the nitrogen interface is perfectly compatible with the sensor mezzanine since it’s a standard 96Boards 40-pin connector. (I was confused with the carbon board which has a different connector).
Great ! thanks a lot
