Flashed wrong boot.img…Please help me.
TTL output:
ATF[0.326]BL33 boot argument location=0x4489c240
ATF[0.963]BL33 boot argument size=0xd00
ATF[0.1485]BL33 start addr=0x46000000
ATF[0.1983]teearg addr=0x100000
ATF[0.2412]atf_magic=0x4d415446
ATF[0.2841]tee_support=0x0
ATF[0.3211]tee_entry=0x0
ATF[0.3559]tee_boot_arg_addr=0x100100
ATF[0.4057]atf_log_port=0x11002000
ATF[0.4521]atf_log_baudrate=0xe1000
ATF[0.4996]atf_log_buf_start=0xbffa0000
ATF[0.5518]atf_log_buf_size=0x40000
ATF[0.5993]atf_aee_debug_buf_start=0xbffdc000
ATF[0.6584]atf_aee_debug_buf_size=0x4000
ATF[0.7117]atf_irq_num=325
ATF[0.7487]BL33_START_ADDRESS=0x46000000
ATF[0.8021]atf chip_code[279]
ATF[0.8404]atf chip_ver[0]
ATF[0.8771]###@@@ MP0_MISC_CONFIG3:0x000f0000 @@@###
ATF[0.9424]###@@@ MP0_MISC_CONFIG3:0x000fe000 @@@###
ATF[0.10086]mmap atf buffer : 0xbffa0000, 0x40000
ATF[0.10848]mmap atf buffer (force 2MB aligned): 0xbfe00000, 0x200000
ATF[0.11709]###@@@ CPUSYS1 OFF @@@###
ATF[0.12182]power_off_little_cl cl:1
ATF[0.12667]INFRA_TOPAXI_PROTECTEN1 (0x10001234):0x00000222
ATF[0.13424]end
NOTICE: BL3-1: v1.0(debug):3eddbd5
NOTICE: BL3-1: Built : 01:49:35, Jul 10 2016
ATF[0.16432]crash flag: 0x41544641
ATF[0.16873]sta=0x0 int=0xff8
ATF[0.17271]is_power_on_boot: false
ATF[0.17883]atf_buf_addr : 0xbffa0100
ATF[0.18327]atf_buf_size : 0x29f00
ATF[0.18769]dump crashlog
ATF[0.19114]atf_crash_log_addr: 0xbffca000
ATF[0.19641]dump_ret=576.
ATF[0.22087]mt_log_setup - atf_buf_addr : 0xbffa0100
ATF[0.22693]mt_log_setup - atf_buf_size : 0x29f00
ATF[0.23296]mt_log_setup - atf_write_pos : 0xbffa0100
ATF[0.23942]mt_log_setup - atf_read_pos : 0xbffa0100
ATF[0.24577]mt_log_setup - atf_buf_lock : 0x0
ATF[0.25137]mt_log_setup - mt_log_buf_end : 0xbffc9fff
ATF[0.25794]mt_log_setup - ATF_CRASH_LAST_LOG_SIZE : 0x8000
ATF[0.26505]mt_log_setup - ATF_EXCEPT_BUF_SIZE_PER_CPU : 0x1000
ATF[0.27258]mt_log_setup - ATF_EXCEPT_BUF_SIZE : 0xa000
ATF[0.27926]mt_log_setup - PLATFORM_CORE_COUNT : 0xa
ATF[0.28562]mt_log_setup - atf_except_write_pos_per_cpu[0]: 0x0(Hi), 0xbffd2000(Low)
ATF[0.29542]mt_log_setup - atf_except_write_pos_per_cpu[1]: 0x0(Hi), 0xbffd3000(Low)
ATF[0.30522]mt_log_setup - atf_except_write_pos_per_cpu[2]: 0x0(Hi), 0xbffd4000(Low)
ATF[0.31502]mt_log_setup - atf_except_write_pos_per_cpu[3]: 0x0(Hi), 0xbffd5000(Low)
ATF[0.32481]mt_log_setup - atf_except_write_pos_per_cpu[4]: 0x0(Hi), 0xbffd6000(Low)
ATF[0.33462]mt_log_setup - atf_except_write_pos_per_cpu[5]: 0x0(Hi), 0xbffd7000(Low)
ATF[0.34442]mt_log_setup - atf_except_write_pos_per_cpu[6]: 0x0(Hi), 0xbffd8000(Low)
ATF[0.35421]mt_log_setup - atf_except_write_pos_per_cpu[7]: 0x0(Hi), 0xbffd9000(Low)
ATF[0.36401]mt_log_setup - atf_except_write_pos_per_cpu[8]: 0x0(Hi), 0xbffda000(Low)
ATF[0.37382]mt_log_setup - atf_except_write_pos_per_cpu[9]: 0x0(Hi), 0xbffdb000(Low)
ATF[0.38362]mt_log_setup - atf_crash_flag : 0x41544641
ATF[0.39019]mt_log_setup - atf_crash_log_addr : 0xbffca000
ATF[0.39719]mt_log_setup - atf_crash_log_size : 0x8000
ATF[0.40376]ATF log service is registered (0xbffa0000, aee:0xbffdc000)
ATF[0.41206]BL3-1: v1.0(debug):3eddbd5
ATF[0.41690]BL3-1: Built : 01:49:35, Jul 10 2016
INFO: BL3-1: Initializing runtime services
ATF[0.42859][BL31] Jump to FIQD for initialization!
INFO: BL3-1: Preparing for EL3 exit to normal world, LK
INFO: BL3-1: Next image address = 0x46000000
INFO: BL3-1: Next image spsr = 0x1d3
ATF[0.45086][BL31] Final dump!
[LOG_STORE:log_store_init.
LOG_STORE:sram buff header 0x12dc00,buff address 0xbffe0000, sig 0xcdab3412, buff_size 0x20000, pl 0x4d63 : 0x28, lk size0x0 : 0x28!
LOG_STORE:value S.
LOG_STORE: buff ready.
0] [PWRAP] pwrap_init_lk
[0] [PWRAP] is_pwrap_init_done 1
[0] [BATTERY] /QON counter still counting…
[10] platform_init()
[20] [msdc_init]: msdc0 Host controller intialization start
[20] [info][msdc_set_startbit 489] read data start bit at rising edge
[20] [info][msdc_config_clksrc] input clock is 400000kHz
[20] [SD0] Bus Width: 1
[20] [info][msdc_config_clksrc] input clock is 400000kHz
[20] [info][msdc_set_startbit 489] read data start bit at rising edge
[20] [SD0] SET_CLK(260kHz): SCLK(259kHz) MODE(0) DDR(0) DIV(385) DS(0) RS(0)
[20] [msdc_init]: msdc0 Host controller intialization done
[20] [mmc_init]: msdc0 start mmc_init_card()
[20] [mmc_init_card]: start
[120] EXT_CSD_ERASE_GRP_DEF is Off, wp_size = 4MB, csd.write_prot_grpsz = 7,csd.erase_sctsz = 1024
[120] [mmc_decode_ext_csd]: mmc_set_wp_size 4MB
[120] [SD0] Switch to High-Speed mode!
[120] [SD0] Switch to SDR buswidth
[120] [info][msdc_config_clksrc] input clock is 400000kHz
[120] [info][msdc_set_startbit 489] read data start bit at rising edge
[140] [SD0] SET_CLK(260kHz): SCLK(259kHz) MODE(0) DDR(0) DIV(385) DS(0) RS(0)
[140] [SD0] Bus Width: 8
[140] [SD0] Size: 7456 MB, Max.Speed: 52000 kHz, blklen(512), nblks(15269888), ro(0)
[140] [mmc_init_mem_card 3543][SD0] Initialized, eMMC50
[140] before host->cur_bus_clk(259740)
[140] [SD0] Switch to High-Speed mode!
[140] [info][msdc_config_clksrc] input clock is 400000kHz
[140] [info][msdc_set_startbit 489] read data start bit at rising edge
[140] [SD0] SET_CLK(52000kHz): SCLK(50000kHz) MODE(0) DDR(0) DIV(2) DS(0) RS(0)
[140] host->cur_bus_clk(50000000)
[140] [mmc_init_card]: finish successfully
[160] [mt_part_register_device]
[160] [GPT_LK]Parsing Primary GPT now…
[160] [GPT_LK][0]name=recovery, part_id=8, start_sect=0x40, nr_sects=0x8000
[160] [GPT_LK][1]name=para, part_id=8, start_sect=0x8040, nr_sects=0x400
[160] [GPT_LK][2]name=expdb, part_id=8, start_sect=0x8440, nr_sects=0x5000
[160] [GPT_LK][3]name=frp, part_id=8, start_sect=0xd440, nr_sects=0x800
[160] [GPT_LK][4]name=nvcfg, part_id=8, start_sect=0xdc40, nr_sects=0x4000
[160] [GPT_LK][5]name=nvdata, part_id=8, start_sect=0x11c40, nr_sects=0x10000
[180] [GPT_LK][6]name=metadata, part_id=8, start_sect=0x21c40, nr_sects=0x10000
[180] [GPT_LK][7]name=protect1, part_id=8, start_sect=0x31c40, nr_sects=0x4000
[180] [GPT_LK][8]name=protect2, part_id=8, start_sect=0x35c40, nr_sects=0x63c0
[180] [GPT_LK][9]name=seccfg, part_id=8, start_sect=0x3c000, nr_sects=0x4000
[180] [GPT_LK][10]name=oemkeystore, part_id=8, start_sect=0x40000, nr_sects=0x1000
[180] [GPT_LK][11]name=proinfo, part_id=8, start_sect=0x41000, nr_sects=0x1800
[180] [GPT_LK][12]name=md1img, part_id=8, start_sect=0x42800, nr_sects=0xc000
[180] [GPT_LK][13]name=md1dsp, part_id=8, start_sect=0x4e800, nr_sects=0x2000
[180] [GPT_LK][14]name=md1arm7, part_id=8, start_sect=0x50800, nr_sects=0x1800
[180] [GPT_LK][15]name=md3img, part_id=8, start_sect=0x52000, nr_sects=0x2800
[180] [GPT_LK][16]name=scp1, part_id=8, start_sect=0x54800, nr_sects=0x800
[180] [GPT_LK][17]name=scp2, part_id=8, start_sect=0x55000, nr_sects=0x800
[200] [GPT_LK][18]name=nvram, part_id=8, start_sect=0x55800, nr_sects=0x2800
[200] [GPT_LK][19]name=lk, part_id=8, start_sect=0x58000, nr_sects=0x400
[200] [GPT_LK][20]name=lk2, part_id=8, start_sect=0x58400, nr_sects=0x400
[200] [GPT_LK][21]name=boot, part_id=8, start_sect=0x58800, nr_sects=0x8000
[200] [GPT_LK][22]name=logo, part_id=8, start_sect=0x60800, nr_sects=0x4000
[200] [GPT_LK][23]name=tee1, part_id=8, start_sect=0x64800, nr_sects=0x2800
[200] [GPT_LK][24]name=tee2, part_id=8, start_sect=0x67000, nr_sects=0x2800
[200] [GPT_LK][25]name=keystore, part_id=8, start_sect=0x69800, nr_sects=0x6800
[200] [GPT_LK][26]name=system, part_id=8, start_sect=0x70000, nr_sects=0x500000
[200] [GPT_LK][27]name=cache, part_id=8, start_sect=0x570000, nr_sects=0xd8000
[200] [GPT_LK][28]name=userdata, part_id=8, start_sect=0x648000, nr_sects=0x83ffdf
[200] [GPT_LK][29]name=flashinfo, part_id=8, start_sect=0xe87fdf, nr_sects=0x8000
[220] [GPT_LK]Success to find valid GPT.
[220] [SD0] boot device found
[220] [PART_LK][get_part] para
[220] [LK_BOOT] Load ‘para’ partition to 0x46087344 (6144 bytes in 3 ms)
[220] [PART_LK][get_part] boot
[220] [LK_BOOT] Load ‘boot’ partition to 0x46900000 (608 bytes in 2 ms)
[220] Warning! No bootopt info!
[220] [PART_LK][get_part] boot
[400] [LK_BOOT] Load ‘boot’ partition to 0x46900000 (3688448 bytes in 83 ms)
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ATF[0.7]CPUxGPT reg(201)
ATF[0.326]BL33 boot argument location=0x4489c240
ATF[0.963]BL33 boot argument size=0xd00
ATF[0.1485]BL33 start addr=0x46000000
ATF[0.1983]teearg addr=0x100000
ATF[0.2412]atf_magic=0x4d415446
ATF[0.2841]tee_support=0x0
ATF[0.3211]tee_entry=0x0
ATF[0.3558]tee_boot_arg_addr=0x100100
ATF[0.4056]atf_log_port=0x11002000
ATF[0.4520]atf_log_baudrate=0xe1000
ATF[0.4995]atf_log_buf_start=0xbffa0000
ATF[0.5517]atf_log_buf_size=0x40000
ATF[0.5992]atf_aee_debug_buf_start=0xbffdc000
ATF[0.6584]atf_aee_debug_buf_size=0x4000
ATF[0.7116]atf_irq_num=325
ATF[0.7486]BL33_START_ADDRESS=0x46000000
ATF[0.8019]atf chip_code[279]
ATF[0.8402]atf chip_ver[0]
ATF[0.8769]###@@@ MP0_MISC_CONFIG3:0x000f0000 @@@###
ATF[0.9423]###@@@ MP0_MISC_CONFIG3:0x000fe000 @@@###
ATF[0.10084]mmap atf buffer : 0xbffa0000, 0x40000
ATF[0.10846]mmap atf buffer (force 2MB aligned): 0xbfe00000, 0x200000
ATF[0.11707]###@@@ CPUSYS1 OFF @@@###
ATF[0.12180]power_off_little_cl cl:1
ATF[0.12665]INFRA_TOPAXI_PROTECTEN1 (0x10001234):0x00000222
ATF[0.13421]end
NOTICE: BL3-1: v1.0(debug):3eddbd5
NOTICE: BL3-1: Built : 01:49:35, Jul 10 2016
ATF[0.16430]crash flag: 0x41544641
ATF[0.16871]sta=0x0 int=0xff8
ATF[0.17269]is_power_on_boot: false
ATF[0.17881]atf_buf_addr : 0xbffa0100
ATF[0.18326]atf_buf_size : 0x29f00
ATF[0.18767]dump crashlog
ATF[0.19112]atf_crash_log_addr: 0xbffca000
ATF[0.19639]dump_ret=576.
ATF[0.22085]mt_log_setup - atf_buf_addr : 0xbffa0100
ATF[0.22691]mt_log_setup - atf_buf_size : 0x29f00
ATF[0.23294]mt_log_setup - atf_write_pos : 0xbffa0100
ATF[0.23940]mt_log_setup - atf_read_pos : 0xbffa0100
ATF[0.24576]mt_log_setup - atf_buf_lock : 0x0
ATF[0.25135]mt_log_setup - mt_log_buf_end : 0xbffc9fff
ATF[0.25792]mt_log_setup - ATF_CRASH_LAST_LOG_SIZE : 0x8000
ATF[0.26503]mt_log_setup - ATF_EXCEPT_BUF_SIZE_PER_CPU : 0x1000
ATF[0.27257]mt_log_setup - ATF_EXCEPT_BUF_SIZE : 0xa000
ATF[0.27924]mt_log_setup - PLATFORM_CORE_COUNT : 0xa
ATF[0.28560]mt_log_setup - atf_except_write_pos_per_cpu[0]: 0x0(Hi), 0xbffd2000(Low)
ATF[0.29540]mt_log_setup - atf_except_write_pos_per_cpu[1]: 0x0(Hi), 0xbffd3000(Low)
ATF[0.30520]mt_log_setup - atf_except_write_pos_per_cpu[2]: 0x0(Hi), 0xbffd4000(Low)
ATF[0.31500]mt_log_setup - atf_except_write_pos_per_cpu[3]: 0x0(Hi), 0xbffd5000(Low)
ATF[0.32480]mt_log_setup - atf_except_write_pos_per_cpu[4]: 0x0(Hi), 0xbffd6000(Low)
ATF[0.33460]mt_log_setup - atf_except_write_pos_per_cpu[5]: 0x0(Hi), 0xbffd7000(Low)
ATF[0.34440]mt_log_setup - atf_except_write_pos_per_cpu[6]: 0x0(Hi), 0xbffd8000(Low)
ATF[0.35420]mt_log_setup - atf_except_write_pos_per_cpu[7]: 0x0(Hi), 0xbffd9000(Low)
ATF[0.36400]mt_log_setup - atf_except_write_pos_per_cpu[8]: 0x0(Hi), 0xbffda000(Low)
ATF[0.37380]mt_log_setup - atf_except_write_pos_per_cpu[9]: 0x0(Hi), 0xbffdb000(Low)
ATF[0.38360]mt_log_setup - atf_crash_flag : 0x41544641
ATF[0.39017]mt_log_setup - atf_crash_log_addr : 0xbffca000
ATF[0.39717]mt_log_setup - atf_crash_log_size : 0x8000
ATF[0.40374]ATF log service is registered (0xbffa0000, aee:0xbffdc000)
ATF[0.41204]BL3-1: v1.0(debug):3eddbd5
ATF[0.41689]BL3-1: Built : 01:49:35, Jul 10 2016
INFO: BL3-1: Initializing runtime services
ATF[0.42857][BL31] Jump to FIQD for initialization!
INFO: BL3-1: Preparing for EL3 exit to normal world, LK
INFO: BL3-1: Next image address = 0x46000000
INFO: BL3-1: Next image spsr = 0x1d3
ATF[0.45083][BL31] Final dump!
[LOG_STORE:log_store_init.
LOG_STORE:sram buff header 0x12dc00,buff address 0xbffe0000, sig 0xcdab3412, buff_size 0x20000, pl 0x4d63 : 0x28, lk size0x0 : 0x28!
LOG_STORE:value S.
LOG_STORE: buff ready.
0] [PWRAP] pwrap_init_lk
[0] [PWRAP] is_pwrap_init_done 1
[0] [BATTERY] /QON counter still counting…
[10] platform_init()
[20] [msdc_init]: msdc0 Host controller intialization start
[20] [info][msdc_set_startbit 489] read data start bit at rising edge
[20] [info][msdc_config_clksrc] input clock is 400000kHz
[20] [SD0] Bus Width: 1
[20] [info][msdc_config_clksrc] input clock is 400000kHz
[20] [info][msdc_set_startbit 489] read data start bit at rising edge
[20] [SD0] SET_CLK(260kHz): SCLK(259kHz) MODE(0) DDR(0) DIV(385) DS(0) RS(0)
[20] [msdc_init]: msdc0 Host controller intialization done
[20] [mmc_init]: msdc0 start mmc_init_card()
[20] [mmc_init_card]: start
[120] EXT_CSD_ERASE_GRP_DEF is Off, wp_size = 4MB, csd.write_prot_grpsz = 7,csd.erase_sctsz = 1024
[120] [mmc_decode_ext_csd]: mmc_set_wp_size 4MB
[120] [SD0] Switch to High-Speed mode!
[120] [SD0] Switch to SDR buswidth
[120] [info][msdc_config_clksrc] input clock is 400000kHz
[120] [info][msdc_set_startbit 489] read data start bit at rising edge
[140] [SD0] SET_CLK(260kHz): SCLK(259kHz) MODE(0) DDR(0) DIV(385) DS(0) RS(0)
[140] [SD0] Bus Width: 8
[140] [SD0] Size: 7456 MB, Max.Speed: 52000 kHz, blklen(512), nblks(15269888), ro(0)
[140] [mmc_init_mem_card 3543][SD0] Initialized, eMMC50
[140] before host->cur_bus_clk(259740)
[140] [SD0] Switch to High-Speed mode!
[140] [info][msdc_config_clksrc] input clock is 400000kHz
[140] [info][msdc_set_startbit 489] read data start bit at rising edge
[140] [SD0] SET_CLK(52000kHz): SCLK(50000kHz) MODE(0) DDR(0) DIV(2) DS(0) RS(0)
[140] host->cur_bus_clk(50000000)
[140] [mmc_init_card]: finish successfully
[160] [mt_part_register_device]
[160] [GPT_LK]Parsing Primary GPT now…
[160] [GPT_LK][0]name=recovery, part_id=8, start_sect=0x40, nr_sects=0x8000
[160] [GPT_LK][1]name=para, part_id=8, start_sect=0x8040, nr_sects=0x400
[160] [GPT_LK][2]name=expdb, part_id=8, start_sect=0x8440, nr_sects=0x5000
[160] [GPT_LK][3]name=frp, part_id=8, start_sect=0xd440, nr_sects=0x800
[160] [GPT_LK][4]name=nvcfg, part_id=8, start_sect=0xdc40, nr_sects=0x4000
[160] [GPT_LK][5]name=nvdata, part_id=8, start_sect=0x11c40, nr_sects=0x10000
[180] [GPT_LK][6]name=metadata, part_id=8, start_sect=0x21c40, nr_sects=0x10000
[180] [GPT_LK][7]name=protect1, part_id=8, start_sect=0x31c40, nr_sects=0x4000
[180] [GPT_LK][8]name=protect2, part_id=8, start_sect=0x35c40, nr_sects=0x63c0
[180] [GPT_LK][9]name=seccfg, part_id=8, start_sect=0x3c000, nr_sects=0x4000
[180] [GPT_LK][10]name=oemkeystore, part_id=8, start_sect=0x40000, nr_sects=0x1000
[180] [GPT_LK][11]name=proinfo, part_id=8, start_sect=0x41000, nr_sects=0x1800
[180] [GPT_LK][12]name=md1img, part_id=8, start_sect=0x42800, nr_sects=0xc000
[180] [GPT_LK][13]name=md1dsp, part_id=8, start_sect=0x4e800, nr_sects=0x2000
[180] [GPT_LK][14]name=md1arm7, part_id=8, start_sect=0x50800, nr_sects=0x1800
[180] [GPT_LK][15]name=md3img, part_id=8, start_sect=0x52000, nr_sects=0x2800
[180] [GPT_LK][16]name=scp1, part_id=8, start_sect=0x54800, nr_sects=0x800
[180] [GPT_LK][17]name=scp2, part_id=8, start_sect=0x55000, nr_sects=0x800
[200] [GPT_LK][18]name=nvram, part_id=8, start_sect=0x55800, nr_sects=0x2800
[200] [GPT_LK][19]name=lk, part_id=8, start_sect=0x58000, nr_sects=0x400
[200] [GPT_LK][20]name=lk2, part_id=8, start_sect=0x58400, nr_sects=0x400
[200] [GPT_LK][21]name=boot, part_id=8, start_sect=0x58800, nr_sects=0x8000
[200] [GPT_LK][22]name=logo, part_id=8, start_sect=0x60800, nr_sects=0x4000
[200] [GPT_LK][23]name=tee1, part_id=8, start_sect=0x64800, nr_sects=0x2800
[200] [GPT_LK][24]name=tee2, part_id=8, start_sect=0x67000, nr_sects=0x2800
[200] [GPT_LK][25]name=keystore, part_id=8, start_sect=0x69800, nr_sects=0x6800
[200] [GPT_LK][26]name=system, part_id=8, start_sect=0x70000, nr_sects=0x500000
[200] [GPT_LK][27]name=cache, part_id=8, start_sect=0x570000, nr_sects=0xd8000
[200] [GPT_LK][28]name=userdata, part_id=8, start_sect=0x648000, nr_sects=0x83ffdf
[200] [GPT_LK][29]name=flashinfo, part_id=8, start_sect=0xe87fdf, nr_sects=0x8000
[220] [GPT_LK]Success to find valid GPT.
[220] [SD0] boot device found
[220] [PART_LK][get_part] para
[220] [LK_BOOT] Load ‘para’ partition to 0x46087344 (6144 bytes in 3 ms)
[220] [PART_LK][get_part] boot
[220] [LK_BOOT] Load ‘boot’ partition to 0x46900000 (608 bytes in 2 ms)
[220] Warning! No bootopt info!
[220] [PART_LK][get_part] boot
[400] [LK_BOOT] Load ‘boot’ partition to 0x46900000 (3688448 bytes in 83 ms)
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
