Hi all,
I am using Eragon410 SOM in our design.
after flashing the new binaries the system was not booting and it was showing some warnings like system halt and Reset Failed. could any one help on the issue. I have attached the log file.
Logfile
Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.0-00261
S - IMAGE_VARIANT_STRING=HAAAANAAA
S - OEM_IMAGE_VERSION_STRING=C-BPATTH
S - Boot Config, 0x000002e1
S - Core 0 Frequency, 0 MHz
B - 1544 - PBL, Start
B - 3489 - bootable_media_detect_entry, Start
B - 94506 - bootable_media_detect_success, Start
B - 94511 - elf_loader_entry, Start
B - 95735 - auth_hash_seg_entry, Start
B - 95945 - auth_hash_seg_exit, Start
B - 110014 - elf_segs_hash_verify_entry, Start
B - 168887 - PBL, End
B - 175466 - SBL1, Start
B - 238388 - pm_device_init, Start
D - 14792 - pm_device_init, Delta
B - 253760 - boot_flash_init, Start
D - 30 - boot_flash_init, Delta
B - 257755 - boot_config_data_table_init, Start
D - 23241 - boot_config_data_table_init, Delta - (0 Bytes)
B - 285571 - CDT version:3,Platform ID:24,Major ID:1,Minor ID:0,Subtype:0
B - 291793 - sbl1_ddr_set_params, Start
B - 295484 - cpr_init, Start
D - 0 - cpr_init, Delta
B - 301096 - Pre_DDR_clock_init, Start
D - 183 - Pre_DDR_clock_init, Delta
D - 0 - sbl1_ddr_set_params, Delta
B - 313570 - pm_driver_init, Start
D - 6832 - pm_driver_init, Delta
B - 329034 - clock_init, Start
D - 30 - clock_init, Delta
B - 360693 - Image Load, Start
D - 22387 - QSEE Image Loaded, Delta - (460664 Bytes)
B - 383110 - Image Load, Start
D - 274 - SEC Image Loaded, Delta - (2048 Bytes)
B - 390339 - sbl1_efs_handle_cookies, Start
D - 183 - sbl1_efs_handle_cookies, Delta
B - 398147 - Image Load, Start
D - 10858 - QHEE Image Loaded, Delta - (51952 Bytes)
B - 409035 - Image Load, Start
D - 12048 - RPM Image Loaded, Delta - (149492 Bytes)
B - 421113 - Image Load, Start
D - 12688 - APPSBL Image Loaded, Delta - (504404 Bytes)
B - 433832 - QSEE Execution, Start
D - 61 - QSEE Execution, Delta
B - 439535 - SBL1, End
D - 266418 - SBL1, Delta
S - Flash Throughput, 262000 KB/s (1168560 Bytes, 4453 us)
S - DDR Frequency, 400 MHz
Android Bootloader - UART_DM Initialized!!!
[0] [0] welcome to lk
[10] [10] platform_init()
[10] [10] target_init()
[40] [40] SDHC Running in HS200 mode
[60] [60] Done initialization of the card
[70] [70] pm8x41_get_is_cold_boot: Warm boot
[100] [100] Not able to search the panel:
[100] [100] Display not enabled for 24 HW type
[110] [110] Target panel init not found!
[110] [110] pm8x41_get_is_cold_boot: Warm boot
[110] [110] Unable to locate /bootselect partition
[120] [120] boot_verifier: Device is in ORANGE boot state.
[120] [120] Device is unlocked! Skipping verification...
[130] [130] Loading boot image (9021440): start
[190] [190] Loading boot image (9021440): done
[190] [190] use_signed_kernel=1, is_unlocked=1, is_tampered=0.
[650] [650] Best match DTB tags 247/00000018/0x00000000/0/2000b/0/0/0/9086be16/2843c
[650] [650] Using pmic info 0x2000b/0x0/0x0/0x0 for device 0x2000b/0x0/0x0/0x0
[660] [660] target_display_panel_node:510: hw_id=24 panel_name=""
[660] [660] cmdline: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 androidboot.t
[760] [760] Updating device tree: done
[760] [760] booting linux @ 0x80080000, ramdisk @ 0x82000000 (1071923), tags/device tree @ 0x81e00000
[770] [770] Jumping to kernel via monitor
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.49-g3565efb-00022-g53bc7a4-dirty (root@vivek-VirtualBox) (gcc version 4.9.x-google 20140827 (prerelease) (GCC) ) #2 8
[ 0.000000] CPU: AArch64 Processor [410fd030] revision 0
[ 0.000000] Machine: Qualcomm Technologies, Inc. APQ 8016 SBC
[ 0.000000] No earlyprintk arguments passed.
[ 0.000000] cma: Found external_image__region@0, memory base 0x0000000086000000, size 8 MiB, limit 0xffffffffffffffff
[ 0.000000] cma: Found modem_adsp_region@0, memory base 0x0000000086800000, size 43 MiB, limit 0xffffffffffffffff
[ 0.000000] cma: Found pheripheral_region@0, memory base 0x0000000089300000, size 6 MiB, limit 0xffffffffffffffff
[ 0.000000] cma: Found mba_region@0, memory base 0x0000000000000000, size 2 MiB, limit 0xffffffffffffffff
[ 0.000000] cma: Found secure_region@0, memory base 0x0000000000000000, size 109 MiB, limit 0xffffffffffffffff
[ 0.000000] cma: Found venus_qseecom_region@0, memory base 0x0000000000000000, size 18 MiB, limit 0x0000000090000000
[ 0.000000] cma: Found audio_region@0, memory base 0x0000000000000000, size 3 MiB, limit 0xffffffffffffffff
[ 0.000000] cma: Found splash_region@83000000, memory base 0x0000000083000000, size 20 MiB, limit 0xffffffffffffffff
[ 0.000000] cma: CMA: reserved 8 MiB at 0x0000000086000000 for external_image_mem
[ 0.000000] cma: CMA: reserved 43 MiB at 0x0000000086800000 for modem_adsp_mem
[ 0.000000] cma: CMA: reserved 6 MiB at 0x0000000089300000 for peripheral_mem
[ 0.000000] cma: CMA: reserved 4 MiB at 0x00000000bfc00000 for mba_mem
[ 0.000000] cma: CMA: reserved 112 MiB at 0x00000000b8c00000 for secure_mem
[ 0.000000] cma: CMA: reserved 20 MiB at 0x000000008ec00000 for venus_qseecom_mem
[ 0.000000] cma: CMA: reserved 4 MiB at 0x00000000b8800000 for audio_mem
[ 0.000000] cma: CMA: reserved 20 MiB at 0x0000000083000000 for cont_splash_mem
[ 0.000000] cma: CMA: reserved 64 MiB at 0x00000000b4800000 for default region
[ 0.000000] PERCPU: Embedded 17 pages/cpu @ffffffc0346c5000 s40000 r8192 d21440 u69632
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243456
[ 0.000000] Kernel command line: sched_enable_hmp=1 console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom msm_rtb.filter=:
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] software IO TLB [mem 0xb3400000-0xb3500000] (1MB) mapped at [ffffffc033400000-ffffffc0334fffff]
[ 0.000000] Memory: 712884K/990208K available (12320K kernel code, 1857K rwdata, 5904K rodata, 2791K init, 1821K bss, 277324K reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbbffff0000 (245759 MB)
[ 0.000000] vmemmap : 0xffffffbc02000000 - 0xffffffbc03000000 ( 16 MB)
[ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc040000000 ( 1024 MB)
[ 0.000000] .init : 0xffffffc001400000 - 0xffffffc0016b9c40 ( 2792 kB)
[ 0.000000] .text : 0xffffffc000080000 - 0xffffffc0013cc3f4 ( 19761 kB)
[ 0.000000] .data : 0xffffffc0016ba000 - 0xffffffc00188a718 ( 1858 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] HMP scheduling enabled.
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[ 0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
[ 0.004559] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.004578] pid_max: default: 32768 minimum: 301
[ 0.004958] Security Framework initialized
[ 0.004992] SELinux: Initializing.
[ 0.005289] Mount-cache hash table entries: 256
[ 0.007033] Initializing cgroup subsys debug
[ 0.007051] Initializing cgroup subsys freezer
[ 0.007604] /cpus/cpu@0: Unknown CPU type
[ 0.007618] /cpus/cpu@1: Unknown CPU type
[ 0.007631] /cpus/cpu@2: Unknown CPU type
[ 0.007645] /cpus/cpu@3: Unknown CPU type
[ 0.008663] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
[ 0.010252] ftrace: Allocated trace_printk buffers
[ 0.020531] Core Debug Lock unlocked
[ 0.021097] MSM Memory Dump base table set up
[ 0.021130] MSM Memory Dump apps data table set up
[ 0.024503] CPU1: Booted secondary processor
[ 0.032326] CPU2: Booted secondary processor
[ 0.034973] CPU3: Booted secondary processor
[ 0.035172] Brought up 4 CPUs
[ 0.035193] SMP: Total of 4 processors activated.
[ 0.068620] pinctrl core: initialized pinctrl subsystem
[ 0.069387] regulator-dummy: no parameters
[ 0.076715] NET: Registered protocol family 16
[ 0.078915] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.133759] msm_watchdog b017000.qcom,wdt: wdog absent resource not present
[ 0.134055] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized
[ 0.142654] spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000
[ 0.149813] cma: Assigned CMA region at 0 to 1de0000.qcom,venus device
[ 0.150486] cma: Assigned CMA region at 0 to 4080000.qcom,mss device
[ 0.151025] cma: Assigned CMA region at 0 to a21b000.qcom,pronto device
[ 0.152027] ACC: mem_acc_efuse_init: efuse_addr = 0x0000000000058000 (len=0x1000)
[ 0.152104] ACC: mem_acc_fuse_is_setting_expected: [row:0] = 0x4c26008000000706 @52:1 == 1 ?: no
[ 0.152285] mem_acc_corner: 0 <--> 0 mV
[ 0.155984] vdso: 2 pages (1 code, 1 data) at base ffffffc0016c1000
[ 0.305444] Linux video capture interface: v2.00
[ 0.305728] BATTERY: batterydata_init: Battery-data device created!
[ 0.307812] cma: Assigned CMA region at 0 to 8.qcom,ion-heap device
[ 0.307952] ION-heap mm: Cannot specify alignment for this type of heap
[ 0.308141] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
[ 0.308415] cma: Assigned CMA region at 0 to 1c.qcom,ion-heap device
[ 0.308646] cma: Assigned CMA region at 0 to 17.qcom,ion-heap device
[ 0.308860] cma: Assigned CMA region at 0 to 1a.qcom,ion-heap device
[ 0.309146] ION heap system created
[ 0.309400] ION heap kmalloc created
[ 0.309428] ION heap mm created at 0x00000000b8c00000 with size 6d00000
[ 0.309451] ION heap qsecom created at 0x000000008ec00000 with size 1200000
[ 0.309472] ION heap audio created at 0x00000000b8800000 with size 314000
[ 0.309495] ION heap pil_1 created at 0x0000000089300000 with size 600000
[ 0.309515] ION heap pil_2 created at 0x0000000086800000 with size 2b00000
[ 0.309662] msm_bus_fabric_init_driver
[ 0.309910] msm_bus_device 580000.ad-hoc-bus: Dev 1024
[ 0.309928] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
[ 0.309935] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
[ 0.310136] msm_bus_device 580000.ad-hoc-bus: msmbus_coresight initialized
[ 0.310166] msm_bus_device 580000.ad-hoc-bus: Dev 0
[ 0.310181] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
[ 0.310190] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
[ 0.310371] msm_bus_device 580000.ad-hoc-bus: msmbus_coresight initialized
[ 0.310401] msm_bus_device 580000.ad-hoc-bus: Dev 4096
[ 0.310416] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
[ 0.310425] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
[ 0.310595] msm_bus_device 580000.ad-hoc-bus: msmbus_coresight initialized
[ 0.313938] msm_bus_init_clk: Valid node clk node 1024 ctx 0
[ 0.313944] msm_bus_init_clk: Valid node clk node 1024 ctx 1msm_bus_init_clk: Valid node clk node 0 ctx 0
[ 0.314061] msm_bus_init_clk: Valid node clk node 0 ctx 1msm_bus_init_clk: Valid node clk node 4096 ctx 0
[ 0.314176] msm_bus_init_clk: Valid node clk node 4096 ctx 1[ 0.324115] gdsc_venus: no parameters
[ 0.324550] gdsc_mdss: no parameters
[ 0.324931] gdsc_jpeg: no parameters
[ 0.325382] gdsc_vfe: no parameters
[ 0.325801] gdsc_oxili_gx: no parameters
[ 0.326568] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
[ 0.327193] dsi_pll_clock_register_lpm: Registered DSI PLL clocks successfully
[ 0.327990] msm_iommu 1f00000.qcom,iommu: device gfx_iommu (model: 500) mapped at ffffff8000840000, with 2 ctx banks
[ 0.328826] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at ffffff8001480000, with 20 ctx banks
[ 0.334347] msm_iommu_ctx 1f09000.qcom,iommu-ctx: context gfx3d_user using bank 1
[ 0.334546] msm_iommu_ctx 1f0a000.qcom,iommu-ctx: context gfx3d_priv using bank 2
[ 0.334704] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context jpeg_enc0 using bank 2
[ 0.334837] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context vfe using bank 3
[ 0.334960] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context mdp_0 using bank 4
[ 0.335082] msm_iommu_ctx 1e25000.qcom,iommu-ctx: context venus_ns using bank 5
[ 0.335210] msm_iommu_ctx 1e26000.qcom,iommu-ctx: context cpp using bank 6
[ 0.335328] msm_iommu_ctx 1e27000.qcom,iommu-ctx: context mDSP using bank 7
[ 0.335445] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context gss using bank 8
[ 0.335564] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context a2 using bank 9
[ 0.335682] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context mdp_1 using bank 18
[ 0.335803] msm_iommu_ctx 1e33000.qcom,iommu-ctx: context venus_sec_pixel using bank 19
[ 0.336070] msm_iommu_ctx 1e34000.qcom,iommu-ctx: context venus_sec_bitstream using bank 20
[ 0.336221] msm_iommu_ctx 1e35000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 21
[ 0.336385] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_fw using bank 22
[ 0.336520] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context periph_rpm using bank 23
[ 0.336651] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context periph_CE using bank 24
[ 0.336785] msm_iommu_ctx 1e39000.qcom,iommu-ctx: context periph_BLSP using bank 25
[ 0.336915] msm_iommu_ctx 1e3a000.qcom,iommu-ctx: context periph_SDC1 using bank 26
[ 0.337050] msm_iommu_ctx 1e3b000.qcom,iommu-ctx: context periph_SDC2 using bank 27
[ 0.337185] msm_iommu_ctx 1e3c000.qcom,iommu-ctx: context periph_audio using bank 28
[ 0.337322] msm_iommu_ctx 1e3d000.qcom,iommu-ctx: context periph_USB_HS1 using bank 29
[ 0.338450] Advanced Linux Sound Architecture Driver Initialized.
[ 0.339216] Bluetooth: Core ver 2.16
[ 0.339282] NET: Registered protocol family 31
[ 0.339288] Bluetooth: HCI device and connection manager initialized
[ 0.339304] Bluetooth: HCI socket layer initialized
[ 0.339319] Bluetooth: L2CAP socket layer initialized
[ 0.339364] Bluetooth: SCO socket layer initialized
[ 0.339736] cfg80211: Calling CRDA to update world regulatory domain
[ 0.339771] cfg80211: World regulatory domain updated:
[ 0.339776] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 0.339782] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 0.339788] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 0.339795] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 0.339801] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
[ 0.339807] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
[ 0.339813] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
[ 0.339819] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
[ 0.339826] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[ 0.340482] Switching to clocksource arch_sys_counter
[ 0.400095] NET: Registered protocol family 2
[ 0.400826] TCP established hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.400961] TCP bind hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.401175] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.401250] TCP: reno registered
[ 0.401265] UDP hash table entries: 512 (order: 3, 49152 bytes)
[ 0.401312] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes)
[ 0.401732] NET: Registered protocol family 1
[ 0.402673] gcc-mdss-8916 qcom,gcc-mdss.29: Registered GCC MDSS clocks.
[ 0.403620] Trying to unpack rootfs image as initramfs...
[ 0.449958] Freeing initrd memory: 1044K (ffffffc002000000 - ffffffc002105000)
[ 0.453006] Initialise module verification
[ 0.453064] audit: initializing netlink socket (disabled)
[ 0.453110] type=2000 audit(0.429:1): initialized
[ 0.467309] fuse init (API version 7.23)
[ 0.467841] msgmni has been set to 1802
[ 0.471434] Key type asymmetric registered
[ 0.471443] Asymmetric key parser 'x509' registered
[ 0.471727] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.471736] io scheduler noop registered
[ 0.471741] io scheduler deadline registered
[ 0.471762] io scheduler row registered
[ 0.471964] io scheduler cfq registered (default)
[ 0.475922] platform qcom,smp2pgpio-ssr-smp2p-1-in.12: Driver smp2pgpio requests probe deferral
[ 0.476180] platform qcom,smp2pgpio-ssr-smp2p-1-out.13: Driver smp2pgpio requests probe deferral
[ 0.477477] platform qcom,smp2pgpio-ssr-smp2p-4-in.18: Driver smp2pgpio requests probe deferral
[ 0.477724] platform qcom,smp2pgpio-ssr-smp2p-4-out.19: Driver smp2pgpio requests probe deferral
[ 0.478349] msm_dss_get_res_byname: 'vbif_nrt_phys' resource not found
[ 0.478363] mdss_mdp_probe+0x23c/0xcf0->msm_dss_ioremap_byname: 'vbif_nrt_phys' msm_dss_get_res_byname failed
[ 0.478376] mdss_mdp_parse_dt_hw_settings: MDSS VBIF settings not found
[ 0.478403] mdss_mdp_parse_dt_prop_len: prop qcom,mdss-pipe-cursor-off : doesn't exist in device tree
[ 0.478456] mdss_mdp_pipe_addr_setup: type:1 ftchid:1 xinid:0 num:0 ndx:0x1 prio:0
[ 0.478469] mdss_mdp_pipe_addr_setup: type:2 ftchid:7 xinid:1 num:3 ndx:0x8 prio:1
[ 0.478475] mdss_mdp_pipe_addr_setup: type:2 ftchid:8 xinid:5 num:4 ndx:0x10 prio:2
[ 0.478488] mdss_mdp_pipe_addr_setup: type:3 ftchid:4 xinid:2 num:6 ndx:0x40 prio:3
[ 0.478506] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
[ 0.478690] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
[ 0.478700] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-cmd : u32 array read
[ 0.478716] mdss_mdp_parse_dt_prop_len: prop qcom,mdss-clk-levels : doesn't exist in device tree
[ 0.478746] mdss_mdp_parse_dt_prop_len: prop qcom,mdss-ad-off : doesn't exist in device tree
[ 0.479241] mdss_mdp_irq_clk_register: unable to get clk: lut_clk
[ 0.481675] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
[ 0.481965] mdss_dsi_find_panel_of_node: invalid pan node, selecting prim panel
[ 0.481992] mdss_dsi_panel_init: Panel Name = ili9488_320p_video
[ 0.482096] qpnp_pin_of_gpio_xlate: no such PMIC gpio 4 in device topology
[ 0.482290] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
[ 0.482309] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-status-command
[ 0.482337] mdss_dsi_parse_panel_features: ulps feature disabled
[ 0.482346] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
[ 0.482354] mdss_dsi_parse_panel_features: dynamic switch feature enabled: 0
[ 0.482365] mdss_dsi_parse_panel_features:1209, Disp_en gpio not specified
[ 0.482379] mdss_dsi_panel_init: Continuous splash disabled
[ 0.482833] dsi_panel_device_register:1863, Disp_en gpio not specified
[ 0.482841] dsi_panel_device_register:1871, TE gpio not specified
[ 0.482847] dsi_panel_device_register: bklt_en gpio not specified
[ 0.482878] dsi_panel_device_register:1882, reset gpio not specified
[ 0.483147] mdss_dsi_pll_1_clk_init: can't find vco_clk. rc=-517
[ 0.483152] PLL 1 Clock's did not register
[ 0.483187] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff80003fe000 ctrl_size=25c phy_base=ffffff8000802500 phy_size=2b0
[ 0.483200] dsi_panel_device_register: Using default BTA for ESD check
[ 0.484366] mdss_register_panel: adding framebuffer device 1a98000.qcom,mdss_dsi
[ 0.485026] mdss_dsi_status_init: DSI status check interval:5000
[ 0.486220] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0x3 (ok)
[ 0.486791] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x39 MSTR_S0
[ 0.590702] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x39 MSTR_S0
[ 0.700692] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x39 MSTR_S0
[ 0.810549] adv7533_read adv7533 i2c read failed after 3 tries
[ 0.810555] adv7533_read_device_rev: adv7533 rev error
[ 0.810560] adv7533_probe: Failed to read revision
[ 0.810672] adv7533: probe of 0-0039 failed with error -5
[ 0.811243] mdss_register_panel: adding framebuffer device qcom,mdss_wb_panel.24
[ 0.812547] mdss_fb_register: FrameBuffer[0] 320x480 registered successfully!
[ 0.812612] mdss_mdp_overlay_init: mdss_mdp_overlay_init: unable to add event timer
[ 0.817068] mdss_fb_register: FrameBuffer[1] 1280x720 registered successfully!
[ 0.817122] mdss_mdp_overlay_init: mdss_mdp_overlay_init: unable to add event timer
[ 0.817189] mdss_mdp_splash_parse_dt: splash mem child node is not present
[ 0.819455] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
[ 0.820903] msm_rpm_log_probe: OK
[ 0.824246] NET: Registered protocol family 27
[ 0.825393] In memshare_probe, Memshare probe success
[ 0.828056] subsys-pil-tz a21b000.qcom,pronto: [wcnss]: Error getting proxy unvoting gpio
[ 0.828138] platform a21b000.qcom,pronto: Driver subsys-pil-tz requests probe deferral
[ 0.829903] pil-q6v5-mss 4080000.qcom,mss: [modem]: Error getting proxy unvoting gpio
[ 0.830090] platform 4080000.qcom,mss: Driver pil-q6v5-mss requests probe deferral
[ 0.831620] msm_serial_hs module loaded
[ 0.831919] msm_serial_hsl_probe: detected port #0 (ttyHSL1)
[ 0.832002] AXI: get_pdata(): Error: Client name not found
[ 0.832008] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
[ 0.832013] msm_serial_hsl_probe: Bus scaling is disabled
[ 0.832108] 78af000.serial: ttyHSL1 at MMIO 0x78af000 (irq = 139) is a MSM
[ 0.832415] msm_serial_hsl_probe: detected port #1 (ttyHSL0)
[ 0.832470] AXI: get_pdata(): Error: Client name not found
[ 0.832476] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
[ 0.832480] msm_serial_hsl_probe: Bus scaling is disabled
[ 0.832570] 78b0000.serial: ttyHSL0 at MMIO 0x78b0000 (irq = 140) is a MSM
[ 0.832611] msm_hsl_console_setup: console setup on port #0
[ 3.608932] console [ttyHSL0] enabled
[ 3.613053] msm_serial_hsl_init: driver initialized
[ 3.631833] kgsl kgsl-3d0: Initialized kgsl-3d0: mmu=on
[ 3.646227] brd: module loaded
[ 3.652809] loop: module loaded
[ 3.655474] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x800000
[ 3.661301] QSEECOM: qseecom_probe: disk-encrypt-pipe-pair=0x2
[ 3.666802] QSEECOM: qseecom_probe: Device does not support PFEQSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
[ 3.676784] QSEECOM: qseecom_probe: qseecom.appsbl_qseecom_support = 0x0[ 3.683524] QSEECOM: qseecom_probe: qseecom clocks handled by other subsm
[ 3.691228] QSEECOM: qseecom_probe: secure app region addr=0x86000000 size=0x300000
[ 3.701295] i2c-core: driver [tabla-i2c-core] using legacy suspend method
[ 3.707207] i2c-core: driver [tabla-i2c-core] using legacy resume method
[ 3.714096] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
[ 3.720900] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
[ 3.727848] i2c-core: driver [tasha-i2c-core] using legacy suspend method
[ 3.734483] i2c-core: driver [tasha-i2c-core] using legacy resume method
[ 3.742115] SCSI Media Changer driver v0.25
[ 3.747405] sps: BAM device 0x0000000007884000 is not registered yet.
[ 3.752848] sps:BAM 0x0000000007884000 is registered.
[ 3.760672] sps:BAM 0x0000000007884000 (va:0xffffff8000f40000) enabled: ver:0x18, number of pipes:16
[ 3.769367] at25 spi0.0: 32 KByte at25 eeprom, pagesize 64
[ 3.780621] at25 spi2.0: 32 KByte at25 eeprom, pagesize 64
[ 3.787443] tun: Universal TUN/TAP device driver, 1.6
[ 3.791491] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 3.800115] PPP generic driver version 2.4.2
[ 3.803615] PPP BSD Compression module registered
[ 3.808029] PPP Deflate Compression module registered
[ 3.813100] PPP MPPE Compression module registered
[ 3.817836] NET: Registered protocol family 24
[ 3.822928] wcnss_wlan probed in built-in mode
[ 3.827614] usbcore: registered new interface driver asix
[ 3.832221] usbcore: registered new interface driver ax88179_178a
[ 3.838197] usbcore: registered new interface driver cdc_ether
[ 3.844359] usbcore: registered new interface driver smsc95xx
[ 3.849746] usbcore: registered new interface driver net1080
[ 3.855408] usbcore: registered new interface driver cdc_subset
[ 3.861329] usbcore: registered new interface driver zaurus
[ 3.867240] usbcore: registered new interface driver cdc_ncm
[ 3.873198] msm_sharedmem: sharedmem_register_qmi: qmi init successful
[ 3.879427] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
[ 3.886650] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_dsp'
[ 3.894386] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_mdm'
[ 3.902071] msm_sharedmem: msm_sharedmem_probe: qcom,client-id property not found
[ 3.909489] msm_sharedmem: msm_sharedmem_probe: Device created for client 'bimc'
[ 3.917239] msm_otg 78d9000.usb: msm_otg probe
[ 3.922150] BUG: rwlock bad magic on CPU#0, swapper/0/1, ffffffc0043207d0
[ 7.831303] [<ffffffc0002035a4>] el1_irq+0x64/0xd4
[ 7.836079] [<ffffffc000263af8>] cpu_startup_entry+0x164/0x1d0
[ 7.841895] [<ffffffc000c2f2a0>] secondary_start_kernel+0xf8/0x108
[ 12.041419] Reboot failed -- System halted
