Hikey960 recovery mode is stuck at flashing

Products Support HiKey 960
#1

Hi,

My Hikey960 is not booting up, so I am trying recovery steps mentioned in below link:

But it is stopping at below message, not proceeding further.

Config name: config
Port name: /dev/ttyUSB1
0: Image: ./sec_usb_xloader.img Downalod Address: 0x20000
1: Image: ./sec_uce_boot.img Downalod Address: 0x6a908000
2: Image: ./sec_fastboot.img Downalod Address: 0x1ac00000
Serial port open successfully!

Is my board has gone wrong or am I doing something wrong here.
please suggest.

Thanks

#2
  • Did you check that switch 2 is on (Boot mode) ?
  • Are you sure your device is on ttyUSB1, do you have a console on ttyUSB0 ? If yes what do you see on console ?