DB410c doesn’t turn on - no LED indicators

Hi everyone,

I need some help with my db410c.
All of a sudden after about nine months of use, it randomly died and won’t turn back on.

The S6 switches were set to 0-0-0-0 since I have linaro installed on the eMMC but when I plug in the board no LEDs will turn on.
Only the blue light blinks for half a second when I plug it back in, after unplugging it for more than a 20 seconds, but no other light after.

I’ve tried many different settings on S6, including setting it to 1-0-0-0 and booting through SD card but the board won’t boot and no LEDs turn on.
Also, booting to fastboot doesn’t seem to be working either.

I’ll try using a recovery image but do you guys have any other suggestion?

Thank you in advance

Recovery guide is here: DragonBoard 410c Board Recovery - 96Boards

There are some circumstances where the USB flashing tools can fix problems that the recovery image cannot so it is definitely worth trying both methods (the SD recovery image method is much easier if you can get it to work so try that first).